[Fri Sep 30 17:28:12 2011] Detection parameters:
  Position = (544.9, 221.8) = 20 32 3.49 41 26 37.8
  Extent = 0.9" x 0.5", rotation angle = 91 degrees
  Source counts = 22.3 +/- 4.9
  Background counts = 1.7
  Rate = 0.0008 +/- 0.0002

[Fri Sep 30 17:28:12 2011] Off-axis axis estimate = 4.47'
[Fri Sep 30 17:29:50 2011] Using EEF radius (= 0.98 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:29:50 2011] Initial guess for spatial extent in simple fitting = 0.98"
[Fri Sep 30 17:29:50 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Fri Sep 30 17:29:50 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 0.98"
[Fri Sep 30 17:29:51 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src16.ximg exists
[Fri Sep 30 17:29:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src16.csv
[Fri Sep 30 17:29:51 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src16_1.ximg exists
[Fri Sep 30 17:29:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src16.csv
[Fri Sep 30 17:29:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:29:53 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Fri Sep 30 17:29:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10951_pi14-548_cl_pass0_tfrozen_src16.csv
[Fri Sep 30 17:29:53 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Sep 30 17:29:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10951_pi14-548_cl_pass0_tfrozen_src16.csv
[Fri Sep 30 17:29:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10951_pi14-548_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10951_pi14-548_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:30:30 2011] Spatial fit model total counts = 24.912400, observed total counts = 28.000000
[Fri Sep 30 17:30:30 2011] Offset between fit and detection position for source 70 = 0.935337 pixels
[Fri Sep 30 17:30:30 2011] 24.055640 total counts/ 0.006440 bgd. counts: snr = 299.684612
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 0.935337 pixels
  Position = (545.2, 222.6) = 20 32 3.50 41 26 38.0
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 24.0 +/- 4.9
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Fri Sep 30 17:30:30 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:30:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:30:30 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:30:30 2011] Source does appear to be extended
[Fri Sep 30 17:30:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:31:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:31:15 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Fri Sep 30 17:31:15 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.961
[Fri Sep 30 17:31:15 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.88"
[Fri Sep 30 17:31:16 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass1_src16.ximg exists
[Fri Sep 30 17:31:16 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass1_src16_1.ximg exists
[Fri Sep 30 17:31:16 2011] Fit fullrun_ccd3_acisf10951_pi14-548_cl_pass1_src16 appears to have run properly
[Fri Sep 30 17:31:18 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Fri Sep 30 17:31:18 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Sep 30 17:31:18 2011] Fit fullrun_ccd3_acisf10951_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Sep 30 17:32:00 2011] Spatial fit model total counts = 25.117100, observed total counts = 27.000000
[Fri Sep 30 17:32:00 2011] Offset between fit and detection position for source 70 = 0.095600 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 0.095600 pixels
  Position = (545.3, 222.7) = 20 32 3.50 41 26 38.0
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 24.1 +/- 4.9
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Fri Sep 30 17:32:00 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:32:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:32:00 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:32:00 2011] Source does appear to be extended
[Fri Sep 30 17:32:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:44:29 2011] Not overwriting source region fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src70_src.reg
[Fri Sep 30 17:44:29 2011] Extracting stamp from image fullrun_ccd3_acisf10951_pi14-548_cl_sm2.00.img.gz, (506, 184) - (584, 262)
[Fri Sep 30 17:44:29 2011] Writing fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src70.gif
[Fri Sep 30 17:45:51 2011] ../../acisf10951/products/events/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src70_src.evt and ../../acisf10951/products/events/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src70_bgd.evt exist, delete to re-create
[Fri Sep 30 17:45:51 2011] Size of ../../acisf10951/products/events/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src70_src.evt.gz[events] = 26 counts
[Fri Sep 30 17:45:51 2011] Mean chipx,y = (949.69, 473.15)
[Fri Sep 30 17:45:51 2011] Mean tdetx,y = (4658.85, 4010.69)
[Fri Sep 30 17:45:51 2011] chipx,y range = (937.00-973.00, 459.00-493.00)
[Fri Sep 30 17:45:51 2011] Size of ../../acisf10951/products/events/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src70_bgd.evt.gz[events] = 33 counts
[Fri Sep 30 17:45:51 2011] ../../acisf10951/products/images/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src70_src.img and ../../acisf10951/products/images/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src70_bgd.img exist, delete to re-create
[Fri Sep 30 17:45:51 2011] ../../acisf10951/products/spectra/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src70_src.pi and ../../acisf10951/products/spectra/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src70_bgd.pi exist, delete to re-create
[Fri Sep 30 17:45:51 2011] Not generating rmf since there are only 24 counts
[Fri Sep 30 17:45:54 2011] ../../acisf10951/products/lightcurves/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src70_src.lc and ../../acisf10951/products/lightcurves/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src70_bgd.lc exist, delete to re-create
[Fri Sep 30 17:48:18 2011] 192.157
[Fri Sep 30 17:48:33 2011] Updating aperture counts using extracted products
[Fri Sep 30 17:48:33 2011] Error reading totcts from fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src70_src.pi.gz
[Fri Sep 30 17:48:33 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 17:48:33 2011] Using photon index=1.80, rate=0.000827, arf fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src70.arf
[Fri Sep 30 17:48:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 17:48:33 2011] Updating source flux to 1.3e-14
[Fri Sep 30 17:49:02 2011] Source 70 has fewer than 100.000000 counts, skipping spectral fitting