[Fri Sep 30 17:28:06 2011] Detection parameters:
  Position = (288.6, 347.7) = 20 32 14.70 41 27 39.8
  Extent = 0.5" x 0.5", rotation angle = 70 degrees
  Source counts = 52.2 +/- 7.3
  Background counts = 1.8
  Rate = 0.002 +/- 0.0003

[Fri Sep 30 17:28:12 2011] Off-axis axis estimate = 2.15'
[Fri Sep 30 17:29:50 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:29:50 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Sep 30 17:29:50 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.135
[Fri Sep 30 17:29:50 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.45"
[Fri Sep 30 17:29:51 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src8.ximg exists
[Fri Sep 30 17:29:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src8.csv
[Fri Sep 30 17:29:51 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src8_1.ximg exists
[Fri Sep 30 17:29:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src8.csv
[Fri Sep 30 17:29:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:29:51 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Fri Sep 30 17:29:51 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Sep 30 17:29:51 2011] Fit fullrun_ccd3_acisf10951_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Sep 30 17:30:30 2011] Spatial fit model total counts = 57.731600, observed total counts = 58.000000
[Fri Sep 30 17:30:30 2011] Offset between fit and detection position for source 6 = 0.790292 pixels
[Fri Sep 30 17:30:30 2011] 57.100910 total counts/ 5.428310 bgd. counts: snr = 22.178287
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.790292 pixels
  Position = (289.1, 348.3) = 20 32 14.70 41 27 39.9
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 51.7 +/- 7.6
  Background counts = 5.4
  Rate = 0.002 +/- 0.0003
[Fri Sep 30 17:30:30 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:30:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:30:30 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:30:30 2011] Source does appear to be extended
[Fri Sep 30 17:30:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:31:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:31:15 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Fri Sep 30 17:31:15 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.102
[Fri Sep 30 17:31:15 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.46"
[Fri Sep 30 17:31:16 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass1_src8.ximg exists
[Fri Sep 30 17:31:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10951_pi14-548_cl_pass1_src8.csv
[Fri Sep 30 17:31:16 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass1_src8_1.ximg exists
[Fri Sep 30 17:31:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10951_pi14-548_cl_pass1_src8.csv
[Fri Sep 30 17:31:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10951_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10951_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:31:18 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Fri Sep 30 17:31:18 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Sep 30 17:31:18 2011] Fit fullrun_ccd3_acisf10951_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Sep 30 17:32:00 2011] Spatial fit model total counts = 58.999900, observed total counts = 59.000000
[Fri Sep 30 17:32:00 2011] Offset between fit and detection position for source 6 = 0.000856 pixels
[Fri Sep 30 17:32:00 2011] 58.820210 total counts/ 7.496710 bgd. counts: snr = 18.744804
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.000856 pixels
  Position = (289.1, 348.3) = 20 32 14.70 41 27 39.9
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 51.3 +/- 7.7
  Background counts = 7.5
  Rate = 0.002 +/- 0.0003
[Fri Sep 30 17:32:00 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:32:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:32:00 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:32:00 2011] Source does appear to be extended
[Fri Sep 30 17:32:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:44:29 2011] Not overwriting source region fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src6_src.reg
[Fri Sep 30 17:44:29 2011] Extracting stamp from image fullrun_ccd3_acisf10951_pi14-548_cl_sm2.00.img.gz, (269, 328) - (310, 369)
[Fri Sep 30 17:44:29 2011] Writing fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src6.gif
[Fri Sep 30 17:45:17 2011] ../../acisf10951/products/events/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src6_src.evt and ../../acisf10951/products/events/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Sep 30 17:45:17 2011] Size of ../../acisf10951/products/events/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src6_src.evt.gz[events] = 53 counts
[Fri Sep 30 17:45:17 2011] Mean chipx,y = (920.06, 759.70)
[Fri Sep 30 17:45:17 2011] Mean tdetx,y = (4372.30, 3981.06)
[Fri Sep 30 17:45:17 2011] chipx,y range = (901.00-938.00, 743.00-779.00)
[Fri Sep 30 17:45:17 2011] Size of ../../acisf10951/products/events/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 10 counts
[Fri Sep 30 17:45:17 2011] ../../acisf10951/products/images/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src6_src.img and ../../acisf10951/products/images/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Sep 30 17:45:17 2011] ../../acisf10951/products/spectra/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src6_src.pi and ../../acisf10951/products/spectra/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Sep 30 17:45:17 2011] Not generating rmf since there are only 51 counts
[Fri Sep 30 17:45:20 2011] ../../acisf10951/products/lightcurves/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src6_src.lc and ../../acisf10951/products/lightcurves/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Sep 30 17:48:18 2011] 201.204
[Fri Sep 30 17:48:33 2011] Updating aperture counts using extracted products
[Fri Sep 30 17:48:33 2011] Error reading totcts from fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Sep 30 17:48:33 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 17:48:33 2011] Using photon index=1.80, rate=0.00176, arf fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src6.arf
[Fri Sep 30 17:48:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 17:48:33 2011] Updating source flux to 2.7e-14
[Fri Sep 30 17:49:02 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting