[Fri Sep 30 17:28:09 2011] Detection parameters:
  Position = (657.1, 340.8) = 20 31 58.58 41 27 36.3
  Extent = 0.7" x 0.5", rotation angle = 53 degrees
  Source counts = 14.9 +/- 4.0
  Background counts = 1.1
  Rate = 0.0005 +/- 0.0001

[Fri Sep 30 17:28:12 2011] Off-axis axis estimate = 5.15'
[Fri Sep 30 17:29:50 2011] Using EEF radius (= 1.24 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:29:50 2011] Initial guess for spatial extent in simple fitting = 1.24"
[Fri Sep 30 17:29:50 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.987
[Fri Sep 30 17:29:50 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 1.24"
[Fri Sep 30 17:29:51 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src24.ximg exists
[Fri Sep 30 17:29:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src24.csv
[Fri Sep 30 17:29:51 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src24_1.ximg exists
[Fri Sep 30 17:29:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src24.csv
[Fri Sep 30 17:29:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10951_pi14-548_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:29:53 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass0_tfrozen_src24.ximg exists
[Fri Sep 30 17:29:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10951_pi14-548_cl_pass0_tfrozen_src24.csv
[Fri Sep 30 17:29:53 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass0_tfrozen_src24_1.ximg exists
[Fri Sep 30 17:29:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10951_pi14-548_cl_pass0_tfrozen_src24.csv
[Fri Sep 30 17:29:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10951_pi14-548_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10951_pi14-548_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:30:30 2011] Spatial fit model total counts = 21.024400, observed total counts = 24.000000
[Fri Sep 30 17:30:30 2011] Offset between fit and detection position for source 40 = 1.342448 pixels
[Fri Sep 30 17:30:30 2011] 21.788965 total counts/ 0.008265 bgd. counts: snr = 239.584407
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 1.342448 pixels
  Position = (656.7, 342.1) = 20 31 58.61 41 27 36.7
  Extent = 1.1 (0.7-1.3)", rotation angle = 0
  Source counts = 21.8 +/- 4.7
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Fri Sep 30 17:30:30 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:30:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:30:30 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:30:30 2011] Source does appear to be extended
[Fri Sep 30 17:30:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:31:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:31:15 2011] Initial guess for spatial extent in simple fitting = 1.09"
[Fri Sep 30 17:31:15 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.014
[Fri Sep 30 17:31:15 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 1.09"
[Fri Sep 30 17:31:16 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass1_src24.ximg exists
[Fri Sep 30 17:31:16 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass1_src24_1.ximg exists
[Fri Sep 30 17:31:16 2011] Fit fullrun_ccd3_acisf10951_pi14-548_cl_pass1_src24 appears to have run properly
[Fri Sep 30 17:31:18 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass1_tfrozen_src24.ximg exists
[Fri Sep 30 17:31:18 2011] fullrun_ccd3_acisf10951_pi14-548_cl_pass1_tfrozen_src24_1.ximg exists
[Fri Sep 30 17:31:18 2011] Fit fullrun_ccd3_acisf10951_pi14-548_cl_pass1_tfrozen_src24 appears to have run properly
[Fri Sep 30 17:32:00 2011] Spatial fit model total counts = 24.528000, observed total counts = 25.000000
[Fri Sep 30 17:32:00 2011] Offset between fit and detection position for source 40 = 0.522861 pixels
[Fri Sep 30 17:32:00 2011] 25.144380 total counts/ 8.186980 bgd. counts: snr = 5.926488
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.522861 pixels
  Position = (657.1, 341.9) = 20 31 58.59 41 27 36.6
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 17.0 +/- 5.0
  Background counts = 8.2
  Rate = 0.0006 +/- 0.0002
[Fri Sep 30 17:32:00 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:32:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:32:00 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:32:00 2011] Source does appear to be extended
[Fri Sep 30 17:32:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:44:29 2011] Not overwriting source region fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src40_src.reg
[Fri Sep 30 17:44:29 2011] Extracting stamp from image fullrun_ccd3_acisf10951_pi14-548_cl_sm2.00.img.gz, (615, 300) - (699, 384)
[Fri Sep 30 17:44:29 2011] Writing fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src40.gif
[Fri Sep 30 17:46:18 2011] ../../acisf10951/products/events/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src40_src.evt and ../../acisf10951/products/events/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src40_bgd.evt exist, delete to re-create
[Fri Sep 30 17:46:18 2011] Size of ../../acisf10951/products/events/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src40_src.evt.gz[events] = 21 counts
[Fri Sep 30 17:46:18 2011] Mean chipx,y = (803.00, 412.38)
[Fri Sep 30 17:46:18 2011] Mean tdetx,y = (4719.62, 3864.00)
[Fri Sep 30 17:46:18 2011] chipx,y range = (783.00-820.00, 393.00-429.00)
[Fri Sep 30 17:46:18 2011] Size of ../../acisf10951/products/events/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src40_bgd.evt.gz[events] = 27 counts
[Fri Sep 30 17:46:18 2011] ../../acisf10951/products/images/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src40_src.img and ../../acisf10951/products/images/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src40_bgd.img exist, delete to re-create
[Fri Sep 30 17:46:18 2011] ../../acisf10951/products/spectra/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src40_src.pi and ../../acisf10951/products/spectra/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src40_bgd.pi exist, delete to re-create
[Fri Sep 30 17:46:18 2011] Not generating rmf since there are only 16 counts
[Fri Sep 30 17:46:21 2011] ../../acisf10951/products/lightcurves/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src40_src.lc and ../../acisf10951/products/lightcurves/fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src40_bgd.lc exist, delete to re-create
[Fri Sep 30 17:48:18 2011] 187.908
[Fri Sep 30 17:48:33 2011] Updating aperture counts using extracted products
[Fri Sep 30 17:48:33 2011] Error reading totcts from fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src40_src.pi.gz
[Fri Sep 30 17:48:33 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 17:48:33 2011] Using photon index=1.80, rate=0.000581, arf fullrun_ccd3_acisf10951_pi14-548_pass1_cl_src40.arf
[Fri Sep 30 17:48:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 17:48:33 2011] Updating source flux to 9.4e-15
[Fri Sep 30 17:49:02 2011] Source 40 has fewer than 100.000000 counts, skipping spectral fitting