[Fri Sep 30 17:28:02 2011] Detection parameters:
  Position = (462.3, 192.3) = 20 32 22.38 41 18 21.3
  Extent = 0.5" x 0.5", rotation angle = 60 degrees
  Source counts = 1863.6 +/- 45.8
  Background counts = 238.4
  Rate = 0.06 +/- 0.002

[Fri Sep 30 17:28:02 2011] Off-axis axis estimate = 9.83'
[Fri Sep 30 17:29:42 2011] Using EEF radius (= 4.28 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:29:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 17:29:42 2011] Initial guess for spatial extent in simple fitting = 4.28"
[Fri Sep 30 17:29:42 2011] source mask rpix=8.7, npix_max = 337, mask sum = 284, frac = 0.841
[Fri Sep 30 17:29:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.28"
[Fri Sep 30 17:29:44 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 30 17:29:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10951_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 17:29:44 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 30 17:29:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10951_pi14-548_cl_pass0_src1.csv
[Fri Sep 30 17:29:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10951_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10951_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:29:45 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 17:29:45 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 17:29:45 2011] Fit fullrun_ccd1_acisf10951_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 17:30:21 2011] Spatial fit model total counts = 4760.390000, observed total counts = 4898.000000
[Fri Sep 30 17:30:21 2011] Offset between fit and detection position for source 65 = 2.017792 pixels
[Fri Sep 30 17:30:21 2011] 4758.592000 total counts/ 475.532000 bgd. counts: snr = 196.410312
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 2.017792 pixels
  Position = (462.3, 190.3) = 20 32 22.41 41 18 20.0
  Extent = 3.6 (3.5-3.7)", rotation angle = 0
  Source counts = 4283.1 +/- 69.0
  Background counts = 475.5
  Rate = 0.1 +/- 0.002
[Fri Sep 30 17:30:22 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:30:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:30:22 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:30:22 2011] Source does appear to be extended
[Fri Sep 30 17:30:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:31:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:31:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 30 17:31:10 2011] Initial guess for spatial extent in simple fitting = 3.56"
[Fri Sep 30 17:31:10 2011] source mask rpix=7.2, npix_max = 239, mask sum = 178, frac = 0.744
[Fri Sep 30 17:31:10 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.56"
[Fri Sep 30 17:31:11 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 30 17:31:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 17:31:11 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 30 17:31:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src1.csv
[Fri Sep 30 17:31:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:31:12 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 17:31:12 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 17:31:12 2011] Fit fullrun_ccd1_acisf10951_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 17:31:43 2011] Spatial fit model total counts = 4657.010000, observed total counts = 4832.000000
[Fri Sep 30 17:31:43 2011] Offset between fit and detection position for source 65 = 0.175638 pixels
[Fri Sep 30 17:31:43 2011] 4659.742000 total counts/ 462.152000 bgd. counts: snr = 195.257443
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 0.175638 pixels
  Position = (462.2, 190.1) = 20 32 22.41 41 18 20.0
  Extent = 3.5 (3.4-3.6)", rotation angle = 0
  Source counts = 4197.6 +/- 68.3
  Background counts = 462.2
  Rate = 0.1 +/- 0.002
[Fri Sep 30 17:31:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:31:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:31:43 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:31:43 2011] Source does appear to be extended
[Fri Sep 30 17:31:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:38:22 2011] Not overwriting source region fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src65_src.reg
[Fri Sep 30 17:38:22 2011] Extracting stamp from image fullrun_ccd1_acisf10951_pi14-548_cl_sm2.00.img.gz, (304, 32) - (620, 348)
[Fri Sep 30 17:38:22 2011] Writing fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src65.gif
[Fri Sep 30 17:38:28 2011] ../../acisf10951/products/events/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src65_src.evt and ../../acisf10951/products/events/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src65_bgd.evt exist, delete to re-create
[Fri Sep 30 17:38:28 2011] Size of ../../acisf10951/products/events/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src65_src.evt.gz[events] = 4781 counts
[Fri Sep 30 17:38:28 2011] Mean chipx,y = (1004.71, 541.31)
[Fri Sep 30 17:38:28 2011] Mean tdetx,y = (4590.69, 5111.71)
[Fri Sep 30 17:38:28 2011] chipx,y range = (963.00-1023.00, 500.00-584.00)
[Fri Sep 30 17:38:28 2011] Size of ../../acisf10951/products/events/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src65_bgd.evt.gz[events] = 471 counts
[Fri Sep 30 17:38:28 2011] ../../acisf10951/products/images/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src65_src.img and ../../acisf10951/products/images/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src65_bgd.img exist, delete to re-create
[Fri Sep 30 17:38:28 2011] ../../acisf10951/products/spectra/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src65_src.pi and ../../acisf10951/products/spectra/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src65_bgd.pi exist, delete to re-create
[Fri Sep 30 17:38:31 2011] ../../acisf10951/products/lightcurves/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src65_src.lc and ../../acisf10951/products/lightcurves/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src65_bgd.lc exist, delete to re-create
[Fri Sep 30 17:41:56 2011] Keeping rmf generated by specextract
[Fri Sep 30 17:41:58 2011] 122.167
[Fri Sep 30 17:48:30 2011] Updating aperture counts using extracted products
[Fri Sep 30 17:48:30 2011] Error reading totcts from fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src65_src.pi.gz
[Fri Sep 30 17:48:31 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 17:48:31 2011] Using photon index=1.80, rate=0.144, arf fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src65.arf
[Fri Sep 30 17:48:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 17:48:31 2011] Updating source flux to 3.5e-12
[Fri Sep 30 17:48:54 2011] Reading fit data from acisf10951/analysis//spectral/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src65_pl.csv
[Fri Sep 30 17:48:54 2011] Spectral fit parameter nH value = 1.18275e+22
[Fri Sep 30 17:48:54 2011] Spectral fit parameter PhoIndex value = 3.66717
[Fri Sep 30 17:48:54 2011] Failed to get F(0.3-8.0) from acisf10951/analysis//spectral/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src65_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 17:48:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 17:48:54 2011] Using Nh = 1.2e+22, photon index=3.67, rate=0.144, arf fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src65.arf
[Fri Sep 30 17:48:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 17:48:54 2011] Updating source flux to 1.8e-12