[Fri Sep 30 17:27:59 2011] Detection parameters:
  Position = (313.2, 1101.3) = 20 32 28.90 41 25 48.5
  Extent = 0.5" x 0.5", rotation angle = 78 degrees
  Source counts = 12.1 +/- 3.6
  Background counts = 0.9
  Rate = 0.0004 +/- 0.0001

[Fri Sep 30 17:28:02 2011] Off-axis axis estimate = 2.42'
[Fri Sep 30 17:29:42 2011] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:29:42 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Fri Sep 30 17:29:42 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.032
[Fri Sep 30 17:29:42 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 0.48"
[Fri Sep 30 17:29:45 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass0_src35.ximg exists
[Fri Sep 30 17:29:45 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass0_src35_1.ximg exists
[Fri Sep 30 17:29:45 2011] Fit fullrun_ccd1_acisf10951_pi14-548_cl_pass0_src35 appears to have run properly
[Fri Sep 30 17:29:48 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Fri Sep 30 17:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10951_pi14-548_cl_pass0_tfrozen_src35.csv
[Fri Sep 30 17:29:48 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Fri Sep 30 17:29:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10951_pi14-548_cl_pass0_tfrozen_src35.csv
[Fri Sep 30 17:29:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10951_pi14-548_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10951_pi14-548_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:30:22 2011] Spatial fit model total counts = 12.824200, observed total counts = 14.000000
[Fri Sep 30 17:30:22 2011] Offset between fit and detection position for source 26 = 0.688536 pixels
[Fri Sep 30 17:30:22 2011] 12.795016 total counts/ 0.164316 bgd. counts: snr = 31.159286
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.688536 pixels
  Position = (313.7, 1101.8) = 20 32 28.90 41 25 48.5
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 12.6 +/- 3.6
  Background counts = 0.2
  Rate = 0.0004 +/- 0.0001
[Fri Sep 30 17:30:22 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:30:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:30:22 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:30:22 2011] Source does appear to be extended
[Fri Sep 30 17:30:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:31:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:31:10 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Fri Sep 30 17:31:10 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.777
[Fri Sep 30 17:31:10 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 0.59"
[Fri Sep 30 17:31:12 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src35.ximg exists
[Fri Sep 30 17:31:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src35.csv
[Fri Sep 30 17:31:12 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src35_1.ximg exists
[Fri Sep 30 17:31:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src35.csv
[Fri Sep 30 17:31:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:31:13 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass1_tfrozen_src35.ximg exists
[Fri Sep 30 17:31:13 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass1_tfrozen_src35_1.ximg exists
[Fri Sep 30 17:31:13 2011] Fit fullrun_ccd1_acisf10951_pi14-548_cl_pass1_tfrozen_src35 appears to have run properly
[Fri Sep 30 17:31:43 2011] Spatial fit model total counts = 14.003100, observed total counts = 15.000000
[Fri Sep 30 17:31:43 2011] Offset between fit and detection position for source 26 = 0.046128 pixels
[Fri Sep 30 17:31:43 2011] 13.834600 total counts/ 0.000000 bgd. counts: snr = 1588764540.461228
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.046128 pixels
  Position = (313.7, 1101.7) = 20 32 28.90 41 25 48.5
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 13.8 +/- 3.7
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Fri Sep 30 17:31:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:31:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:31:43 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:31:43 2011] Source does appear to be extended
[Fri Sep 30 17:31:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:38:25 2011] Not overwriting source region fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src26_src.reg
[Fri Sep 30 17:38:25 2011] Extracting stamp from image fullrun_ccd1_acisf10951_pi14-548_cl_sm2.00.img.gz, (287, 1075) - (340, 1128)
[Fri Sep 30 17:38:25 2011] Writing fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src26.gif
[Fri Sep 30 17:40:33 2011] ../../acisf10951/products/events/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src26_src.evt and ../../acisf10951/products/events/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Fri Sep 30 17:40:33 2011] Size of ../../acisf10951/products/events/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src26_src.evt.gz[events] = 13 counts
[Fri Sep 30 17:40:33 2011] Mean chipx,y = (196.92, 990.92)
[Fri Sep 30 17:40:33 2011] Mean tdetx,y = (4141.08, 4303.92)
[Fri Sep 30 17:40:33 2011] chipx,y range = (179.00-212.00, 975.00-1007.00)
[Fri Sep 30 17:40:33 2011] Size of ../../acisf10951/products/events/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 13 counts
[Fri Sep 30 17:40:33 2011] ../../acisf10951/products/images/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src26_src.img and ../../acisf10951/products/images/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Fri Sep 30 17:40:33 2011] ../../acisf10951/products/spectra/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src26_src.pi and ../../acisf10951/products/spectra/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Fri Sep 30 17:40:33 2011] Not generating rmf since there are only 13 counts
[Fri Sep 30 17:40:39 2011] ../../acisf10951/products/lightcurves/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src26_src.lc and ../../acisf10951/products/lightcurves/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Fri Sep 30 17:41:59 2011] 198.262
[Fri Sep 30 17:48:31 2011] Updating aperture counts using extracted products
[Fri Sep 30 17:48:31 2011] Error reading totcts from fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src26_src.pi.gz
[Fri Sep 30 17:48:31 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 17:48:31 2011] Using photon index=1.80, rate=0.000474, arf fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src26.arf
[Fri Sep 30 17:48:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 17:48:31 2011] Updating source flux to 7.4e-15
[Fri Sep 30 17:48:45 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting