[Fri Sep 30 17:27:57 2011] Detection parameters:
  Position = (595.2, 1075.0) = 20 32 16.56 41 25 35.6
  Extent = 0.7" x 0.5", rotation angle = 108 degrees
  Source counts = 22.7 +/- 4.9
  Background counts = 1.3
  Rate = 0.0008 +/- 0.0002

[Fri Sep 30 17:28:02 2011] Off-axis axis estimate = 3.11'
[Fri Sep 30 17:29:42 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:29:42 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Fri Sep 30 17:29:42 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.011
[Fri Sep 30 17:29:42 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.60"
[Fri Sep 30 17:29:45 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass0_src19.ximg exists
[Fri Sep 30 17:29:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10951_pi14-548_cl_pass0_src19.csv
[Fri Sep 30 17:29:45 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass0_src19_1.ximg exists
[Fri Sep 30 17:29:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10951_pi14-548_cl_pass0_src19.csv
[Fri Sep 30 17:29:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10951_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10951_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:29:46 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Fri Sep 30 17:29:46 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Sep 30 17:29:46 2011] Fit fullrun_ccd1_acisf10951_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Sep 30 17:30:22 2011] Spatial fit model total counts = 25.807500, observed total counts = 25.000000
[Fri Sep 30 17:30:22 2011] Offset between fit and detection position for source 23 = 1.080208 pixels
[Fri Sep 30 17:30:22 2011] 26.076830 total counts/ 4.562730 bgd. counts: snr = 10.071886
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.080208 pixels
  Position = (595.6, 1076.0) = 20 32 16.56 41 25 35.8
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 21.5 +/- 5.1
  Background counts = 4.6
  Rate = 0.0007 +/- 0.0002
[Fri Sep 30 17:30:22 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:30:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:30:22 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:30:22 2011] Source does appear to be extended
[Fri Sep 30 17:30:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:31:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:31:10 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Fri Sep 30 17:31:10 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.967
[Fri Sep 30 17:31:10 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.50"
[Fri Sep 30 17:31:12 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src19.ximg exists
[Fri Sep 30 17:31:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src19.csv
[Fri Sep 30 17:31:12 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src19_1.ximg exists
[Fri Sep 30 17:31:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src19.csv
[Fri Sep 30 17:31:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10951_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:31:12 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Fri Sep 30 17:31:12 2011] fullrun_ccd1_acisf10951_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Sep 30 17:31:12 2011] Fit fullrun_ccd1_acisf10951_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Fri Sep 30 17:31:43 2011] Spatial fit model total counts = 24.227000, observed total counts = 25.000000
[Fri Sep 30 17:31:43 2011] Offset between fit and detection position for source 23 = 0.020969 pixels
[Fri Sep 30 17:31:43 2011] 24.378330 total counts/ 4.389330 bgd. counts: snr = 9.540957
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.020969 pixels
  Position = (595.6, 1076.0) = 20 32 16.56 41 25 35.8
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 20.0 +/- 4.9
  Background counts = 4.4
  Rate = 0.0007 +/- 0.0002
[Fri Sep 30 17:31:43 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:31:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:31:43 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:31:43 2011] Source does appear to be extended
[Fri Sep 30 17:31:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:38:25 2011] Not overwriting source region fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src23_src.reg
[Fri Sep 30 17:38:25 2011] Extracting stamp from image fullrun_ccd1_acisf10951_pi14-548_cl_sm2.00.img.gz, (572, 1052) - (620, 1100)
[Fri Sep 30 17:38:25 2011] Writing fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src23.gif
[Fri Sep 30 17:39:37 2011] ../../acisf10951/products/events/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src23_src.evt and ../../acisf10951/products/events/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Fri Sep 30 17:39:37 2011] Size of ../../acisf10951/products/events/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src23_src.evt.gz[events] = 21 counts
[Fri Sep 30 17:39:37 2011] Mean chipx,y = (127.90, 717.67)
[Fri Sep 30 17:39:37 2011] Mean tdetx,y = (4414.33, 4234.90)
[Fri Sep 30 17:39:37 2011] chipx,y range = (109.00-143.00, 699.00-732.00)
[Fri Sep 30 17:39:37 2011] Size of ../../acisf10951/products/events/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 12 counts
[Fri Sep 30 17:39:37 2011] ../../acisf10951/products/images/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src23_src.img and ../../acisf10951/products/images/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Fri Sep 30 17:39:37 2011] ../../acisf10951/products/spectra/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src23_src.pi and ../../acisf10951/products/spectra/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Fri Sep 30 17:39:37 2011] Not generating rmf since there are only 19 counts
[Fri Sep 30 17:39:40 2011] ../../acisf10951/products/lightcurves/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src23_src.lc and ../../acisf10951/products/lightcurves/fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Fri Sep 30 17:41:58 2011] 200.132
[Fri Sep 30 17:48:31 2011] Updating aperture counts using extracted products
[Fri Sep 30 17:48:31 2011] Error reading totcts from fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src23_src.pi.gz
[Fri Sep 30 17:48:31 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 17:48:31 2011] Using photon index=1.80, rate=0.000685, arf fullrun_ccd1_acisf10951_pi14-548_pass1_cl_src23.arf
[Fri Sep 30 17:48:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 17:48:31 2011] Updating source flux to 1.1e-14
[Fri Sep 30 17:48:45 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting