[Fri Sep 30 17:27:47 2011] Detection parameters:
  Position = (1123.1, 539.4) = 20 32 36.16 41 23 57.3
  Extent = 0.7" x 0.5", rotation angle = 86 degrees
  Source counts = 15.8 +/- 4.1
  Background counts = 1.2
  Rate = 0.0005 +/- 0.0001

[Fri Sep 30 17:27:51 2011] Off-axis axis estimate = 4.62'
[Fri Sep 30 17:29:36 2011] Using EEF radius (= 1.04 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:29:36 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Fri Sep 30 17:29:36 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.920
[Fri Sep 30 17:29:36 2011] Giving source the simple spatial ID 36 for pass 0, mean size = 1.04"
[Fri Sep 30 17:29:40 2011] fullrun_ccd0_acisf10951_pi14-548_cl_pass0_src36.ximg exists
[Fri Sep 30 17:29:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10951_pi14-548_cl_pass0_src36.csv
[Fri Sep 30 17:29:41 2011] fullrun_ccd0_acisf10951_pi14-548_cl_pass0_src36_1.ximg exists
[Fri Sep 30 17:29:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10951_pi14-548_cl_pass0_src36.csv
[Fri Sep 30 17:29:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10951_pi14-548_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10951_pi14-548_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:29:42 2011] fullrun_ccd0_acisf10951_pi14-548_cl_pass0_tfrozen_src36.ximg exists
[Fri Sep 30 17:29:42 2011] fullrun_ccd0_acisf10951_pi14-548_cl_pass0_tfrozen_src36_1.ximg exists
[Fri Sep 30 17:29:42 2011] Fit fullrun_ccd0_acisf10951_pi14-548_cl_pass0_tfrozen_src36 appears to have run properly
[Fri Sep 30 17:30:14 2011] Spatial fit model total counts = 19.783100, observed total counts = 20.000000
[Fri Sep 30 17:30:14 2011] Offset between fit and detection position for source 36 = 0.804394 pixels
[Fri Sep 30 17:30:14 2011] 19.383600 total counts/ 3.633500 bgd. counts: snr = 8.262676
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.804394 pixels
  Position = (1123.6, 540.1) = 20 32 36.16 41 23 57.4
  Extent = 0.8 (0.5-1.0)", rotation angle = 0
  Source counts = 15.8 +/- 4.4
  Background counts = 3.6
  Rate = 0.0005 +/- 0.0002
[Fri Sep 30 17:30:14 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:30:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:30:14 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:30:14 2011] Source does appear to be extended
[Fri Sep 30 17:30:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:31:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 17:31:07 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Fri Sep 30 17:31:07 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.137
[Fri Sep 30 17:31:07 2011] Giving source the simple spatial ID 36 for pass 1, mean size = 0.79"
[Fri Sep 30 17:31:09 2011] fullrun_ccd0_acisf10951_pi14-548_cl_pass1_src36.ximg exists
[Fri Sep 30 17:31:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10951_pi14-548_cl_pass1_src36.csv
[Fri Sep 30 17:31:09 2011] fullrun_ccd0_acisf10951_pi14-548_cl_pass1_src36_1.ximg exists
[Fri Sep 30 17:31:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10951_pi14-548_cl_pass1_src36.csv
[Fri Sep 30 17:31:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10951_pi14-548_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10951_pi14-548_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 17:31:10 2011] fullrun_ccd0_acisf10951_pi14-548_cl_pass1_tfrozen_src36.ximg exists
[Fri Sep 30 17:31:10 2011] fullrun_ccd0_acisf10951_pi14-548_cl_pass1_tfrozen_src36_1.ximg exists
[Fri Sep 30 17:31:10 2011] Fit fullrun_ccd0_acisf10951_pi14-548_cl_pass1_tfrozen_src36 appears to have run properly
[Fri Sep 30 17:31:37 2011] Spatial fit model total counts = 19.084400, observed total counts = 19.000000
[Fri Sep 30 17:31:37 2011] Offset between fit and detection position for source 36 = 0.006574 pixels
[Fri Sep 30 17:31:37 2011] 18.753000 total counts/ 2.746900 bgd. counts: snr = 9.657486
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.006574 pixels
  Position = (1123.6, 540.1) = 20 32 36.16 41 23 57.4
  Extent = 0.8 (0.5-1.1)", rotation angle = 0
  Source counts = 16.0 +/- 4.3
  Background counts = 2.7
  Rate = 0.0005 +/- 0.0001
[Fri Sep 30 17:31:37 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 17:31:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 17:31:37 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 17:31:37 2011] Source does appear to be extended
[Fri Sep 30 17:31:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 17:32:35 2011] Not overwriting source region fullrun_ccd0_acisf10951_pi14-548_pass1_cl_src36_src.reg
[Fri Sep 30 17:32:35 2011] Extracting stamp from image fullrun_ccd0_acisf10951_pi14-548_cl_sm2.00.img.gz, (1089, 506) - (1158, 575)
[Fri Sep 30 17:32:35 2011] Writing fullrun_ccd0_acisf10951_pi14-548_pass1_cl_src36.gif
[Fri Sep 30 17:35:01 2011] ../../acisf10951/products/events/fullrun_ccd0_acisf10951_pi14-548_pass1_cl_src36_src.evt and ../../acisf10951/products/events/fullrun_ccd0_acisf10951_pi14-548_pass1_cl_src36_bgd.evt exist, delete to re-create
[Fri Sep 30 17:35:01 2011] Size of ../../acisf10951/products/events/fullrun_ccd0_acisf10951_pi14-548_pass1_cl_src36_src.evt.gz[events] = 17 counts
[Fri Sep 30 17:35:01 2011] Mean chipx,y = (559.18, 997.71)
[Fri Sep 30 17:35:01 2011] Mean tdetx,y = (4058.71, 4572.82)
[Fri Sep 30 17:35:01 2011] chipx,y range = (540.00-578.00, 983.00-1015.00)
[Fri Sep 30 17:35:01 2011] Size of ../../acisf10951/products/events/fullrun_ccd0_acisf10951_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 32 counts
[Fri Sep 30 17:35:01 2011] ../../acisf10951/products/images/fullrun_ccd0_acisf10951_pi14-548_pass1_cl_src36_src.img and ../../acisf10951/products/images/fullrun_ccd0_acisf10951_pi14-548_pass1_cl_src36_bgd.img exist, delete to re-create
[Fri Sep 30 17:35:01 2011] ../../acisf10951/products/spectra/fullrun_ccd0_acisf10951_pi14-548_pass1_cl_src36_src.pi and ../../acisf10951/products/spectra/fullrun_ccd0_acisf10951_pi14-548_pass1_cl_src36_bgd.pi exist, delete to re-create
[Fri Sep 30 17:35:01 2011] Not generating rmf since there are only 16 counts
[Fri Sep 30 17:35:05 2011] ../../acisf10951/products/lightcurves/fullrun_ccd0_acisf10951_pi14-548_pass1_cl_src36_src.lc and ../../acisf10951/products/lightcurves/fullrun_ccd0_acisf10951_pi14-548_pass1_cl_src36_bgd.lc exist, delete to re-create
[Fri Sep 30 17:38:20 2011] 189.494
[Fri Sep 30 17:48:29 2011] Updating aperture counts using extracted products
[Fri Sep 30 17:48:29 2011] Error reading totcts from fullrun_ccd0_acisf10951_pi14-548_pass1_cl_src36_src.pi.gz
[Fri Sep 30 17:48:30 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 17:48:30 2011] Using photon index=1.80, rate=0.000549, arf fullrun_ccd0_acisf10951_pi14-548_pass1_cl_src36.arf
[Fri Sep 30 17:48:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 17:48:30 2011] Updating source flux to 8.8e-15
[Fri Sep 30 17:48:44 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Sep 30 17:48:45 2011] acisf10951/analysis//spectral/fullrun_ccd0_acisf10951_pi14-548_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete