[Thu Sep 29 19:44:47 2011] Detection parameters:
  Position = (201.5, 621.4) = 20 32 56.22 41 34 25.2
  Extent = 0.6" x 0.5", rotation angle = 162 degrees
  Source counts = 45.6 +/- 6.9
  Background counts = 1.4
  Rate = 0.002 +/- 0.0002

[Thu Sep 29 19:44:49 2011] Off-axis axis estimate = 3.02'
[Thu Sep 29 19:46:10 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 19:46:10 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Thu Sep 29 19:46:10 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.790
[Thu Sep 29 19:46:10 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.58"
[Thu Sep 29 19:46:13 2011] fullrun_ccd3_acisf10950_pi14-548_cl_pass0_src3.ximg exists
[Thu Sep 29 19:46:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10950_pi14-548_cl_pass0_src3.csv
[Thu Sep 29 19:46:13 2011] fullrun_ccd3_acisf10950_pi14-548_cl_pass0_src3_1.ximg exists
[Thu Sep 29 19:46:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10950_pi14-548_cl_pass0_src3.csv
[Thu Sep 29 19:46:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10950_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10950_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 19:46:13 2011] fullrun_ccd3_acisf10950_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Thu Sep 29 19:46:13 2011] fullrun_ccd3_acisf10950_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Sep 29 19:46:13 2011] Fit fullrun_ccd3_acisf10950_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Sep 29 19:46:38 2011] Spatial fit model total counts = 49.449100, observed total counts = 50.000000
[Thu Sep 29 19:46:38 2011] Offset between fit and detection position for source 2 = 0.754122 pixels
[Thu Sep 29 19:46:38 2011] 48.976500 total counts/ 4.905600 bgd. counts: snr = 19.897836
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.754122 pixels
  Position = (202.0, 622.0) = 20 32 56.22 41 34 25.2
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 44.1 +/- 7.0
  Background counts = 4.9
  Rate = 0.002 +/- 0.0003
[Thu Sep 29 19:46:38 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 19:46:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 19:46:38 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 19:46:38 2011] Source does appear to be extended
[Thu Sep 29 19:46:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 19:47:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 19:47:12 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Thu Sep 29 19:47:12 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.270
[Thu Sep 29 19:47:12 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.63"
[Thu Sep 29 19:47:13 2011] fullrun_ccd3_acisf10950_pi14-548_cl_pass1_src3.ximg exists
[Thu Sep 29 19:47:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10950_pi14-548_cl_pass1_src3.csv
[Thu Sep 29 19:47:13 2011] fullrun_ccd3_acisf10950_pi14-548_cl_pass1_src3_1.ximg exists
[Thu Sep 29 19:47:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10950_pi14-548_cl_pass1_src3.csv
[Thu Sep 29 19:47:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10950_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10950_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 19:47:13 2011] fullrun_ccd3_acisf10950_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Thu Sep 29 19:47:13 2011] fullrun_ccd3_acisf10950_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Sep 29 19:47:13 2011] Fit fullrun_ccd3_acisf10950_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Sep 29 19:47:36 2011] Spatial fit model total counts = 49.545000, observed total counts = 48.000000
[Thu Sep 29 19:47:36 2011] Offset between fit and detection position for source 2 = 0.034789 pixels
[Thu Sep 29 19:47:36 2011] 49.328210 total counts/ 2.229710 bgd. counts: snr = 31.541539
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.034789 pixels
  Position = (202.0, 621.9) = 20 32 56.22 41 34 25.2
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 47.1 +/- 7.0
  Background counts = 2.2
  Rate = 0.002 +/- 0.0003
[Thu Sep 29 19:47:36 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 19:47:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 19:47:36 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 19:47:36 2011] Source does appear to be extended
[Thu Sep 29 19:47:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 19:55:34 2011] Not overwriting source region fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src2_src.reg
[Thu Sep 29 19:55:34 2011] Extracting stamp from image fullrun_ccd3_acisf10950_pi14-548_cl_sm2.00.img.gz, (172, 592) - (232, 652)
[Thu Sep 29 19:55:34 2011] Writing fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src2.gif
[Thu Sep 29 19:55:42 2011] ../../acisf10950/products/events/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src2_src.evt and ../../acisf10950/products/events/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu Sep 29 19:55:42 2011] Size of ../../acisf10950/products/events/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src2_src.evt.gz[events] = 47 counts
[Thu Sep 29 19:55:42 2011] Mean chipx,y = (590.30, 926.19)
[Thu Sep 29 19:55:42 2011] Mean tdetx,y = (4205.81, 3651.30)
[Thu Sep 29 19:55:42 2011] chipx,y range = (575.00-611.00, 908.00-944.00)
[Thu Sep 29 19:55:42 2011] Size of ../../acisf10950/products/events/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 14 counts
[Thu Sep 29 19:55:42 2011] ../../acisf10950/products/images/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src2_src.img and ../../acisf10950/products/images/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu Sep 29 19:55:42 2011] ../../acisf10950/products/spectra/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src2_src.pi and ../../acisf10950/products/spectra/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Thu Sep 29 19:55:42 2011] Not generating rmf since there are only 47 counts
[Thu Sep 29 19:55:45 2011] ../../acisf10950/products/lightcurves/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src2_src.lc and ../../acisf10950/products/lightcurves/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu Sep 29 19:57:37 2011] 190.385
[Thu Sep 29 19:57:58 2011] Updating aperture counts using extracted products
[Thu Sep 29 19:57:58 2011] Error reading totcts from fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src2_src.pi.gz
[Thu Sep 29 19:57:58 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 19:57:58 2011] Using photon index=1.80, rate=0.00172, arf fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src2.arf
[Thu Sep 29 19:57:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 19:57:58 2011] Updating source flux to 2.7e-14
[Thu Sep 29 19:58:10 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Sep 29 19:58:11 2011] acisf10950/analysis//spectral/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete