[Thu Sep 29 19:44:48 2011] Detection parameters:
  Position = (110.5, 412.3) = 20 33 0.21 41 32 42.3
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 11.3 +/- 3.5
  Background counts = 0.7
  Rate = 0.0004 +/- 0.0001

[Thu Sep 29 19:44:49 2011] Off-axis axis estimate = 1.17'
[Thu Sep 29 19:46:10 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 19:46:10 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Sep 29 19:46:10 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.383
[Thu Sep 29 19:46:10 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 0.38"
[Thu Sep 29 19:46:13 2011] fullrun_ccd3_acisf10950_pi14-548_cl_pass0_src20.ximg exists
[Thu Sep 29 19:46:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10950_pi14-548_cl_pass0_src20.csv
[Thu Sep 29 19:46:13 2011] fullrun_ccd3_acisf10950_pi14-548_cl_pass0_src20_1.ximg exists
[Thu Sep 29 19:46:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10950_pi14-548_cl_pass0_src20.csv
[Thu Sep 29 19:46:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10950_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10950_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 19:46:13 2011] fullrun_ccd3_acisf10950_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Thu Sep 29 19:46:13 2011] fullrun_ccd3_acisf10950_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Sep 29 19:46:13 2011] Fit fullrun_ccd3_acisf10950_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Thu Sep 29 19:46:38 2011] Spatial fit model total counts = 13.300500, observed total counts = 14.000000
[Thu Sep 29 19:46:38 2011] Offset between fit and detection position for source 18 = 0.777028 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.777028 pixels
  Position = (111.0, 412.9) = 20 33 0.21 41 32 42.4
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 12.8 +/- 3.6
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Thu Sep 29 19:46:38 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 19:46:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 19:46:38 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 19:46:38 2011] Source does appear to be extended
[Thu Sep 29 19:46:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 19:47:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 19:47:12 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Thu Sep 29 19:47:12 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.577
[Thu Sep 29 19:47:12 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.40"
[Thu Sep 29 19:47:13 2011] fullrun_ccd3_acisf10950_pi14-548_cl_pass1_src20.ximg exists
[Thu Sep 29 19:47:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10950_pi14-548_cl_pass1_src20.csv
[Thu Sep 29 19:47:13 2011] fullrun_ccd3_acisf10950_pi14-548_cl_pass1_src20_1.ximg exists
[Thu Sep 29 19:47:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10950_pi14-548_cl_pass1_src20.csv
[Thu Sep 29 19:47:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10950_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10950_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 19:47:14 2011] fullrun_ccd3_acisf10950_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Thu Sep 29 19:47:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10950_pi14-548_cl_pass1_tfrozen_src20.csv
[Thu Sep 29 19:47:14 2011] fullrun_ccd3_acisf10950_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Sep 29 19:47:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10950_pi14-548_cl_pass1_tfrozen_src20.csv
[Thu Sep 29 19:47:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10950_pi14-548_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10950_pi14-548_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 19:47:36 2011] Spatial fit model total counts = 11.527100, observed total counts = 14.000000
[Thu Sep 29 19:47:36 2011] Offset between fit and detection position for source 18 = 0.103278 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.103278 pixels
  Position = (111.0, 412.8) = 20 33 0.21 41 32 42.3
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 12.4 +/- 3.5
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Thu Sep 29 19:47:36 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 19:47:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 19:47:36 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 19:47:36 2011] Source does appear to be extended
[Thu Sep 29 19:47:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 19:55:34 2011] Not overwriting source region fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src18_src.reg
[Thu Sep 29 19:55:34 2011] Extracting stamp from image fullrun_ccd3_acisf10950_pi14-548_cl_sm2.00.img.gz, (92, 394) - (130, 432)
[Thu Sep 29 19:55:34 2011] Writing fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src18.gif
[Thu Sep 29 19:56:34 2011] ../../acisf10950/products/events/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src18_src.evt and ../../acisf10950/products/events/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Thu Sep 29 19:56:34 2011] Size of ../../acisf10950/products/events/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src18_src.evt.gz[events] = 12 counts
[Thu Sep 29 19:56:34 2011] Mean chipx,y = (815.25, 974.75)
[Thu Sep 29 19:56:34 2011] Mean tdetx,y = (4157.25, 3876.25)
[Thu Sep 29 19:56:34 2011] chipx,y range = (803.00-835.00, 956.00-985.00)
[Thu Sep 29 19:56:34 2011] Size of ../../acisf10950/products/events/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 8 counts
[Thu Sep 29 19:56:34 2011] ../../acisf10950/products/images/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src18_src.img and ../../acisf10950/products/images/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Thu Sep 29 19:56:34 2011] ../../acisf10950/products/spectra/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src18_src.pi and ../../acisf10950/products/spectra/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Thu Sep 29 19:56:34 2011] Not generating rmf since there are only 12 counts
[Thu Sep 29 19:56:37 2011] ../../acisf10950/products/lightcurves/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src18_src.lc and ../../acisf10950/products/lightcurves/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Thu Sep 29 19:57:37 2011] 199.243
[Thu Sep 29 19:57:58 2011] Updating aperture counts using extracted products
[Thu Sep 29 19:57:58 2011] Error reading totcts from fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src18_src.pi.gz
[Thu Sep 29 19:57:58 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 19:57:58 2011] Using photon index=1.80, rate=0.000453, arf fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src18.arf
[Thu Sep 29 19:57:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 19:57:58 2011] Updating source flux to 6.9e-15
[Thu Sep 29 19:58:10 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Sep 29 19:58:11 2011] acisf10950/analysis//spectral/fullrun_ccd3_acisf10950_pi14-548_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete