[Thu Sep 29 19:44:28 2011] Detection parameters:
  Position = (813.9, 750.4) = 20 33 23.71 41 28 59.4
  Extent = 0.8" x 0.6", rotation angle = 54 degrees
  Source counts = 18.4 +/- 4.5
  Background counts = 1.6
  Rate = 0.0007 +/- 0.0002

[Thu Sep 29 19:44:31 2011] Off-axis axis estimate = 4.62'
[Thu Sep 29 19:46:04 2011] Using EEF radius (= 1.04 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 19:46:04 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Thu Sep 29 19:46:04 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.103
[Thu Sep 29 19:46:04 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.04"
[Thu Sep 29 19:46:05 2011] fullrun_ccd0_acisf10950_pi14-548_cl_pass0_src10.ximg exists
[Thu Sep 29 19:46:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10950_pi14-548_cl_pass0_src10.csv
[Thu Sep 29 19:46:05 2011] fullrun_ccd0_acisf10950_pi14-548_cl_pass0_src10_1.ximg exists
[Thu Sep 29 19:46:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10950_pi14-548_cl_pass0_src10.csv
[Thu Sep 29 19:46:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10950_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10950_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 19:46:05 2011] fullrun_ccd0_acisf10950_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Thu Sep 29 19:46:05 2011] fullrun_ccd0_acisf10950_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Sep 29 19:46:05 2011] Fit fullrun_ccd0_acisf10950_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Sep 29 19:46:26 2011] Spatial fit model total counts = 21.176000, observed total counts = 21.000000
[Thu Sep 29 19:46:26 2011] Offset between fit and detection position for source 11 = 0.876881 pixels
[Thu Sep 29 19:46:26 2011] 20.704600 total counts/ 0.000000 bgd. counts: snr = 391371725132840.500000
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.876881 pixels
  Position = (814.5, 751.1) = 20 33 23.70 41 28 59.5
  Extent = 0.9 (0.7-1.2)", rotation angle = 0
  Source counts = 20.7 +/- 4.6
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Thu Sep 29 19:46:26 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 19:46:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 19:46:26 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 19:46:26 2011] Source does appear to be extended
[Thu Sep 29 19:46:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 19:47:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 19:47:05 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Thu Sep 29 19:47:05 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.894
[Thu Sep 29 19:47:05 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.92"
[Thu Sep 29 19:47:06 2011] fullrun_ccd0_acisf10950_pi14-548_cl_pass1_src9.ximg exists
[Thu Sep 29 19:47:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10950_pi14-548_cl_pass1_src9.csv
[Thu Sep 29 19:47:06 2011] fullrun_ccd0_acisf10950_pi14-548_cl_pass1_src9_1.ximg exists
[Thu Sep 29 19:47:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10950_pi14-548_cl_pass1_src9.csv
[Thu Sep 29 19:47:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10950_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10950_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 19:47:06 2011] fullrun_ccd0_acisf10950_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Thu Sep 29 19:47:06 2011] fullrun_ccd0_acisf10950_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Sep 29 19:47:06 2011] Fit fullrun_ccd0_acisf10950_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Sep 29 19:47:23 2011] Spatial fit model total counts = 19.650300, observed total counts = 21.000000
[Thu Sep 29 19:47:23 2011] Offset between fit and detection position for source 11 = 0.121358 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.121358 pixels
  Position = (814.5, 751.2) = 20 33 23.70 41 28 59.6
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 19.2 +/- 4.4
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Thu Sep 29 19:47:23 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 19:47:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 19:47:23 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 19:47:23 2011] Source does appear to be extended
[Thu Sep 29 19:47:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 19:48:06 2011] Not overwriting source region fullrun_ccd0_acisf10950_pi14-548_pass1_cl_src11_src.reg
[Thu Sep 29 19:48:06 2011] Extracting stamp from image fullrun_ccd0_acisf10950_pi14-548_cl_sm2.00.img.gz, (773, 710) - (856, 793)
[Thu Sep 29 19:48:06 2011] Writing fullrun_ccd0_acisf10950_pi14-548_pass1_cl_src11.gif
[Thu Sep 29 19:48:43 2011] ../../acisf10950/products/events/fullrun_ccd0_acisf10950_pi14-548_pass1_cl_src11_src.evt and ../../acisf10950/products/events/fullrun_ccd0_acisf10950_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Thu Sep 29 19:48:43 2011] Size of ../../acisf10950/products/events/fullrun_ccd0_acisf10950_pi14-548_pass1_cl_src11_src.evt.gz[events] = 20 counts
[Thu Sep 29 19:48:43 2011] Mean chipx,y = (694.85, 675.85)
[Thu Sep 29 19:48:43 2011] Mean tdetx,y = (3736.85, 4437.15)
[Thu Sep 29 19:48:43 2011] chipx,y range = (676.00-710.00, 660.00-696.00)
[Thu Sep 29 19:48:43 2011] Size of ../../acisf10950/products/events/fullrun_ccd0_acisf10950_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 12 counts
[Thu Sep 29 19:48:43 2011] ../../acisf10950/products/images/fullrun_ccd0_acisf10950_pi14-548_pass1_cl_src11_src.img and ../../acisf10950/products/images/fullrun_ccd0_acisf10950_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Thu Sep 29 19:48:43 2011] ../../acisf10950/products/spectra/fullrun_ccd0_acisf10950_pi14-548_pass1_cl_src11_src.pi and ../../acisf10950/products/spectra/fullrun_ccd0_acisf10950_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Thu Sep 29 19:48:43 2011] Not generating rmf since there are only 19 counts
[Thu Sep 29 19:48:46 2011] ../../acisf10950/products/lightcurves/fullrun_ccd0_acisf10950_pi14-548_pass1_cl_src11_src.lc and ../../acisf10950/products/lightcurves/fullrun_ccd0_acisf10950_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Thu Sep 29 19:50:34 2011] 188.597
[Thu Sep 29 19:57:54 2011] Updating aperture counts using extracted products
[Thu Sep 29 19:57:55 2011] Error reading totcts from fullrun_ccd0_acisf10950_pi14-548_pass1_cl_src11_src.pi.gz
[Thu Sep 29 19:57:55 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 19:57:55 2011] Using photon index=1.80, rate=0.000699, arf fullrun_ccd0_acisf10950_pi14-548_pass1_cl_src11.arf
[Thu Sep 29 19:57:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 19:57:55 2011] Updating source flux to 1.1e-14
[Thu Sep 29 19:58:04 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Sep 29 19:58:05 2011] acisf10950/analysis//spectral/fullrun_ccd0_acisf10950_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete