[Tue Oct 25 17:56:22 2011] Detection parameters:
  Position = (514.3, 235.5) = 20 33 29.84 41 26 30.0
  Extent = 3.2" x 1.8", rotation angle = 98 degrees
  Source counts = 22.5 +/- 5.8
  Background counts = 11.5
  Rate = 0.0008 +/- 0.0002

[Tue Oct 25 17:56:25 2011] Off-axis axis estimate = 9.20'
[Tue Oct 25 17:57:25 2011] Using EEF radius (= 3.75 ")to estimate initial spatial extent for simple fitting
[Tue Oct 25 17:57:25 2011] Initial guess for spatial extent in simple fitting = 3.75"
[Tue Oct 25 17:57:25 2011] source mask rpix=7.6, npix_max = 263, mask sum = 272, frac = 1.033
[Tue Oct 25 17:57:25 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 3.75"
[Tue Oct 25 17:57:26 2011] fullrun_ccd1_acisf10949_pi14-548_cl_pass0_src12.ximg exists
[Tue Oct 25 17:57:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10949_pi14-548_cl_pass0_src12.csv
[Tue Oct 25 17:57:26 2011] fullrun_ccd1_acisf10949_pi14-548_cl_pass0_src12_1.ximg exists
[Tue Oct 25 17:57:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10949_pi14-548_cl_pass0_src12.csv
[Tue Oct 25 17:57:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10949_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10949_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 17:57:27 2011] fullrun_ccd1_acisf10949_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Tue Oct 25 17:57:27 2011] fullrun_ccd1_acisf10949_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Oct 25 17:57:27 2011] Fit fullrun_ccd1_acisf10949_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Oct 25 17:57:47 2011] Spatial fit model total counts = 51.747700, observed total counts = 52.000000
[Tue Oct 25 17:57:47 2011] Offset between fit and detection position for source 20 = 0.963372 pixels
[Tue Oct 25 17:57:47 2011] 51.635300 total counts/ 34.571900 bgd. counts: snr = 2.902044
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.963372 pixels
  Position = (514.8, 236.3) = 20 33 29.84 41 26 30.1
  Extent = 1.8 (1.2-3.3)", rotation angle = 0
  Source counts = 17.1 +/- 7.2
  Background counts = 34.6
  Rate = 0.0006 +/- 0.0003
[Tue Oct 25 17:57:47 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 17:57:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 17:57:47 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 17:57:47 2011] Source does appear to be extended
[Tue Oct 25 17:57:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 17:58:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 25 17:58:15 2011] Initial guess for spatial extent in simple fitting = 1.83"
[Tue Oct 25 17:58:15 2011] source mask rpix=3.7, npix_max = 71, mask sum = 64, frac = 0.897
[Tue Oct 25 17:58:15 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 1.83"
[Tue Oct 25 17:58:16 2011] fullrun_ccd1_acisf10949_pi14-548_cl_pass1_src12.ximg exists
[Tue Oct 25 17:58:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10949_pi14-548_cl_pass1_src12.csv
[Tue Oct 25 17:58:16 2011] fullrun_ccd1_acisf10949_pi14-548_cl_pass1_src12_1.ximg exists
[Tue Oct 25 17:58:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10949_pi14-548_cl_pass1_src12.csv
[Tue Oct 25 17:58:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10949_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10949_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 17:58:16 2011] fullrun_ccd1_acisf10949_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Tue Oct 25 17:58:16 2011] fullrun_ccd1_acisf10949_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Oct 25 17:58:16 2011] Fit fullrun_ccd1_acisf10949_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Oct 25 17:58:31 2011] Spatial fit model total counts = 23.210100, observed total counts = 24.000000
[Tue Oct 25 17:58:31 2011] Offset between fit and detection position for source 20 = 0.676645 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.676645 pixels
  Position = (515.3, 235.8) = 20 33 29.82 41 26 29.9
  Extent = 2.0 (1.4-2.7)", rotation angle = 0
  Source counts = 23.1 +/- 4.8
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Tue Oct 25 17:58:31 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 17:58:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 17:58:31 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 17:58:31 2011] Source does appear to be extended
[Tue Oct 25 17:58:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 18:00:00 2011] Not overwriting source region fullrun_ccd1_acisf10949_pi14-548_pass1_cl_src20_src.reg
[Tue Oct 25 18:00:00 2011] Extracting stamp from image fullrun_ccd1_acisf10949_pi14-548_cl_sm2.00.img.gz, (424, 144) - (607, 327)
[Tue Oct 25 18:00:00 2011] Writing fullrun_ccd1_acisf10949_pi14-548_pass1_cl_src20.gif
[Tue Oct 25 18:00:35 2011] ../../acisf10949/products/events/fullrun_ccd1_acisf10949_pi14-548_pass1_cl_src20_src.evt and ../../acisf10949/products/events/fullrun_ccd1_acisf10949_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Tue Oct 25 18:00:35 2011] Size of ../../acisf10949/products/events/fullrun_ccd1_acisf10949_pi14-548_pass1_cl_src20_src.evt.gz[events] = 35 counts
[Tue Oct 25 18:00:35 2011] Mean chipx,y = (900.91, 513.54)
[Tue Oct 25 18:00:35 2011] Mean tdetx,y = (4618.46, 5007.91)
[Tue Oct 25 18:00:35 2011] chipx,y range = (872.00-923.00, 487.00-536.00)
[Tue Oct 25 18:00:35 2011] Size of ../../acisf10949/products/events/fullrun_ccd1_acisf10949_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 120 counts
[Tue Oct 25 18:00:35 2011] ../../acisf10949/products/images/fullrun_ccd1_acisf10949_pi14-548_pass1_cl_src20_src.img and ../../acisf10949/products/images/fullrun_ccd1_acisf10949_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Tue Oct 25 18:00:35 2011] ../../acisf10949/products/spectra/fullrun_ccd1_acisf10949_pi14-548_pass1_cl_src20_src.pi and ../../acisf10949/products/spectra/fullrun_ccd1_acisf10949_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Tue Oct 25 18:00:35 2011] Not generating rmf since there are only 23 counts
[Tue Oct 25 18:00:38 2011] ../../acisf10949/products/lightcurves/fullrun_ccd1_acisf10949_pi14-548_pass1_cl_src20_src.lc and ../../acisf10949/products/lightcurves/fullrun_ccd1_acisf10949_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Tue Oct 25 18:02:45 2011] 168.518
[Tue Oct 25 18:05:00 2011] Updating aperture counts using extracted products
[Tue Oct 25 18:05:00 2011] Error reading totcts from fullrun_ccd1_acisf10949_pi14-548_pass1_cl_src20_src.pi.gz
[Tue Oct 25 18:05:01 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 25 18:05:01 2011] Using photon index=1.80, rate=0.000844, arf fullrun_ccd1_acisf10949_pi14-548_pass1_cl_src20.arf
[Tue Oct 25 18:05:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 25 18:05:01 2011] Updating source flux to 1.5e-14
[Tue Oct 25 18:05:14 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 25 18:05:15 2011] acisf10949/analysis//spectral/fullrun_ccd1_acisf10949_pi14-548_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete