[Tue Oct 25 17:56:20 2011] Detection parameters:
  Position = (175.8, 653.9) = 20 34 29.57 41 31 45.5
  Extent = 3.9" x 3.1", rotation angle = 71 degrees
  Source counts = 353.5 +/- 20.5
  Background counts = 66.5
  Rate = 0.01 +/- 0.0007

[Tue Oct 25 17:56:20 2011] Off-axis axis estimate = 9.65'
[Tue Oct 25 17:57:23 2011] Using EEF radius (= 4.12 ")to estimate initial spatial extent for simple fitting
[Tue Oct 25 17:57:23 2011] Initial guess for spatial extent in simple fitting = 4.12"
[Tue Oct 25 17:57:23 2011] source mask rpix=8.4, npix_max = 315, mask sum = 324, frac = 1.027
[Tue Oct 25 17:57:23 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 4.12"
[Tue Oct 25 17:57:25 2011] fullrun_ccd0_acisf10949_pi14-548_cl_pass0_src20.ximg exists
[Tue Oct 25 17:57:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10949_pi14-548_cl_pass0_src20.csv
[Tue Oct 25 17:57:25 2011] fullrun_ccd0_acisf10949_pi14-548_cl_pass0_src20_1.ximg exists
[Tue Oct 25 17:57:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10949_pi14-548_cl_pass0_src20.csv
[Tue Oct 25 17:57:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10949_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10949_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 17:57:25 2011] fullrun_ccd0_acisf10949_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Tue Oct 25 17:57:25 2011] fullrun_ccd0_acisf10949_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Oct 25 17:57:25 2011] Fit fullrun_ccd0_acisf10949_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Tue Oct 25 17:57:43 2011] Spatial fit model total counts = 435.133000, observed total counts = 435.000000
[Tue Oct 25 17:57:43 2011] Offset between fit and detection position for source 29 = 0.126830 pixels
[Tue Oct 25 17:57:43 2011] 435.513600 total counts/ 63.376600 bgd. counts: snr = 46.745347
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.126830 pixels
  Position = (175.7, 654.0) = 20 34 29.59 41 31 45.2
  Extent = 4.0 (3.7-4.4)", rotation angle = 0
  Source counts = 372.1 +/- 20.9
  Background counts = 63.4
  Rate = 0.01 +/- 0.0008
[Tue Oct 25 17:57:43 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 17:57:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 17:57:43 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 17:57:43 2011] Source does appear to be extended
[Tue Oct 25 17:57:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 17:58:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 25 17:58:12 2011] Initial guess for spatial extent in simple fitting = 3.99"
[Tue Oct 25 17:58:12 2011] source mask rpix=8.1, npix_max = 297, mask sum = 306, frac = 1.030
[Tue Oct 25 17:58:12 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 3.99"
[Tue Oct 25 17:58:13 2011] fullrun_ccd0_acisf10949_pi14-548_cl_pass1_src20.ximg exists
[Tue Oct 25 17:58:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10949_pi14-548_cl_pass1_src20.csv
[Tue Oct 25 17:58:13 2011] fullrun_ccd0_acisf10949_pi14-548_cl_pass1_src20_1.ximg exists
[Tue Oct 25 17:58:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10949_pi14-548_cl_pass1_src20.csv
[Tue Oct 25 17:58:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10949_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10949_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 17:58:15 2011] fullrun_ccd0_acisf10949_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Tue Oct 25 17:58:15 2011] fullrun_ccd0_acisf10949_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Tue Oct 25 17:58:15 2011] Fit fullrun_ccd0_acisf10949_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Tue Oct 25 17:58:27 2011] Spatial fit model total counts = 432.020000, observed total counts = 432.000000
[Tue Oct 25 17:58:27 2011] Offset between fit and detection position for source 29 = 0.070810 pixels
[Tue Oct 25 17:58:27 2011] 432.399600 total counts/ 60.587600 bgd. counts: snr = 47.767392
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.070810 pixels
  Position = (175.7, 653.9) = 20 34 29.59 41 31 45.2
  Extent = 4.0 (3.7-4.3)", rotation angle = 0
  Source counts = 371.8 +/- 20.8
  Background counts = 60.6
  Rate = 0.01 +/- 0.0008
[Tue Oct 25 17:58:27 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 17:58:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 17:58:27 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 17:58:27 2011] Source does appear to be extended
[Tue Oct 25 17:58:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 17:58:57 2011] Not overwriting source region fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src29_src.reg
[Tue Oct 25 17:58:57 2011] Extracting stamp from image fullrun_ccd0_acisf10949_pi14-548_cl_sm2.00.img.gz, (0, 471) - (359, 837)
[Tue Oct 25 17:58:57 2011] Writing fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src29.gif
[Tue Oct 25 17:59:54 2011] ../../acisf10949/products/events/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src29_src.evt and ../../acisf10949/products/events/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src29_bgd.evt exist, delete to re-create
[Tue Oct 25 17:59:54 2011] Size of ../../acisf10949/products/events/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src29_src.evt.gz[events] = 425 counts
[Tue Oct 25 17:59:54 2011] Mean chipx,y = (447.38, 78.20)
[Tue Oct 25 17:59:54 2011] Mean tdetx,y = (3139.20, 4684.62)
[Tue Oct 25 17:59:54 2011] chipx,y range = (403.00-491.00, 40.00-118.00)
[Tue Oct 25 17:59:54 2011] Size of ../../acisf10949/products/events/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 371 counts
[Tue Oct 25 17:59:54 2011] ../../acisf10949/products/images/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src29_src.img and ../../acisf10949/products/images/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src29_bgd.img exist, delete to re-create
[Tue Oct 25 17:59:54 2011] ../../acisf10949/products/spectra/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src29_src.pi and ../../acisf10949/products/spectra/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src29_bgd.pi exist, delete to re-create
[Tue Oct 25 17:59:57 2011] ../../acisf10949/products/lightcurves/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src29_src.lc and ../../acisf10949/products/lightcurves/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src29_bgd.lc exist, delete to re-create
[Tue Oct 25 17:59:59 2011] Keeping rmf generated by specextract
[Tue Oct 25 17:59:59 2011] 160.857
[Tue Oct 25 18:05:00 2011] Updating aperture counts using extracted products
[Tue Oct 25 18:05:00 2011] Error reading totcts from fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src29_src.pi.gz
[Tue Oct 25 18:05:00 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 25 18:05:00 2011] Using photon index=1.80, rate=0.0136, arf fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src29.arf
[Tue Oct 25 18:05:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 25 18:05:00 2011] Updating source flux to 2.4e-13