[Tue Oct 25 17:56:19 2011] Detection parameters:
  Position = (543.5, 1056.7) = 20 34 13.48 41 35 3.9
  Extent = 0.7" x 0.5", rotation angle = 147 degrees
  Source counts = 12.2 +/- 3.6
  Background counts = 0.8
  Rate = 0.0004 +/- 0.0001

[Tue Oct 25 17:56:20 2011] Off-axis axis estimate = 5.93'
[Tue Oct 25 17:57:23 2011] Using EEF radius (= 1.59 ")to estimate initial spatial extent for simple fitting
[Tue Oct 25 17:57:23 2011] Initial guess for spatial extent in simple fitting = 1.59"
[Tue Oct 25 17:57:23 2011] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.876
[Tue Oct 25 17:57:23 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 1.59"
[Tue Oct 25 17:57:24 2011] fullrun_ccd0_acisf10949_pi14-548_cl_pass0_src13.ximg exists
[Tue Oct 25 17:57:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10949_pi14-548_cl_pass0_src13.csv
[Tue Oct 25 17:57:25 2011] fullrun_ccd0_acisf10949_pi14-548_cl_pass0_src13_1.ximg exists
[Tue Oct 25 17:57:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10949_pi14-548_cl_pass0_src13.csv
[Tue Oct 25 17:57:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10949_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10949_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 17:57:25 2011] fullrun_ccd0_acisf10949_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Tue Oct 25 17:57:25 2011] fullrun_ccd0_acisf10949_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Oct 25 17:57:25 2011] Fit fullrun_ccd0_acisf10949_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Oct 25 17:57:43 2011] Spatial fit model total counts = 43.646400, observed total counts = 45.000000
[Tue Oct 25 17:57:43 2011] Offset between fit and detection position for source 19 = 1.171864 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 1.171864 pixels
  Position = (544.5, 1056.1) = 20 34 13.46 41 35 3.4
  Extent = 2.0 (1.6-2.5)", rotation angle = 0
  Source counts = 42.7 +/- 6.5
  Background counts = 0.0
  Rate = 0.002 +/- 0.0002
[Tue Oct 25 17:57:43 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 17:57:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 17:57:43 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 17:57:43 2011] Source does appear to be extended
[Tue Oct 25 17:57:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 17:58:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 25 17:58:12 2011] Initial guess for spatial extent in simple fitting = 1.98"
[Tue Oct 25 17:58:12 2011] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 0.992
[Tue Oct 25 17:58:12 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 1.98"
[Tue Oct 25 17:58:13 2011] fullrun_ccd0_acisf10949_pi14-548_cl_pass1_src13.ximg exists
[Tue Oct 25 17:58:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10949_pi14-548_cl_pass1_src13.csv
[Tue Oct 25 17:58:13 2011] fullrun_ccd0_acisf10949_pi14-548_cl_pass1_src13_1.ximg exists
[Tue Oct 25 17:58:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10949_pi14-548_cl_pass1_src13.csv
[Tue Oct 25 17:58:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10949_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10949_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 17:58:15 2011] fullrun_ccd0_acisf10949_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Tue Oct 25 17:58:15 2011] fullrun_ccd0_acisf10949_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Oct 25 17:58:15 2011] Fit fullrun_ccd0_acisf10949_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Oct 25 17:58:27 2011] Spatial fit model total counts = 46.245800, observed total counts = 51.000000
[Tue Oct 25 17:58:27 2011] Offset between fit and detection position for source 19 = 0.381794 pixels
[Tue Oct 25 17:58:27 2011] 44.658780 total counts/ 3.027080 bgd. counts: snr = 23.928319
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.381794 pixels
  Position = (544.8, 1055.9) = 20 34 13.45 41 35 3.3
  Extent = 2.0 (1.6-2.4)", rotation angle = 0
  Source counts = 41.6 +/- 6.7
  Background counts = 3.0
  Rate = 0.002 +/- 0.0002
[Tue Oct 25 17:58:27 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 17:58:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 17:58:27 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 17:58:27 2011] Source does appear to be extended
[Tue Oct 25 17:58:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 17:58:57 2011] Not overwriting source region fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src19_src.reg
[Tue Oct 25 17:58:57 2011] Extracting stamp from image fullrun_ccd0_acisf10949_pi14-548_cl_sm2.00.img.gz, (452, 963) - (638, 1149)
[Tue Oct 25 17:58:57 2011] Writing fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src19.gif
[Tue Oct 25 17:59:33 2011] ../../acisf10949/products/events/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src19_src.evt and ../../acisf10949/products/events/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Tue Oct 25 17:59:33 2011] Size of ../../acisf10949/products/events/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src19_src.evt.gz[events] = 47 counts
[Tue Oct 25 17:59:33 2011] Mean chipx,y = (919.72, 348.77)
[Tue Oct 25 17:59:33 2011] Mean tdetx,y = (3409.77, 4212.28)
[Tue Oct 25 17:59:33 2011] chipx,y range = (894.00-945.00, 319.00-373.00)
[Tue Oct 25 17:59:33 2011] Size of ../../acisf10949/products/events/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 90 counts
[Tue Oct 25 17:59:33 2011] ../../acisf10949/products/images/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src19_src.img and ../../acisf10949/products/images/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Tue Oct 25 17:59:33 2011] ../../acisf10949/products/spectra/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src19_src.pi and ../../acisf10949/products/spectra/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src19_bgd.pi exist, delete to re-create
[Tue Oct 25 17:59:33 2011] Not generating rmf since there are only 41 counts
[Tue Oct 25 17:59:36 2011] ../../acisf10949/products/lightcurves/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src19_src.lc and ../../acisf10949/products/lightcurves/fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Tue Oct 25 17:59:59 2011] 173.821
[Tue Oct 25 18:05:00 2011] Updating aperture counts using extracted products
[Tue Oct 25 18:05:00 2011] Error reading totcts from fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src19_src.pi.gz
[Tue Oct 25 18:05:00 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 25 18:05:00 2011] Using photon index=1.80, rate=0.00152, arf fullrun_ccd0_acisf10949_pi14-548_pass1_cl_src19.arf
[Tue Oct 25 18:05:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 25 18:05:00 2011] Updating source flux to 2.6e-14
[Tue Oct 25 18:05:06 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting