[Sun Sep 25 14:55:20 2011] Detection parameters:
  Position = (552.0, 989.1) = 20 32 31.05 41 36 3.8
  Extent = 0.6" x 0.5", rotation angle = 114 degrees
  Source counts = 11.9 +/- 3.6
  Background counts = 1.1
  Rate = 0.0004 +/- 0.0001

[Sun Sep 25 14:55:21 2011] Off-axis axis estimate = 3.77'
[Sun Sep 25 14:56:18 2011] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 14:56:18 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Sun Sep 25 14:56:18 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.947
[Sun Sep 25 14:56:18 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 0.76"
[Sun Sep 25 14:56:20 2011] fullrun_ccd1_acisf10946_pi14-548_cl_pass0_src16.ximg exists
[Sun Sep 25 14:56:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10946_pi14-548_cl_pass0_src16.csv
[Sun Sep 25 14:56:20 2011] fullrun_ccd1_acisf10946_pi14-548_cl_pass0_src16_1.ximg exists
[Sun Sep 25 14:56:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10946_pi14-548_cl_pass0_src16.csv
[Sun Sep 25 14:56:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10946_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10946_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 14:56:21 2011] fullrun_ccd1_acisf10946_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Sun Sep 25 14:56:21 2011] fullrun_ccd1_acisf10946_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Sep 25 14:56:21 2011] Fit fullrun_ccd1_acisf10946_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Sun Sep 25 14:56:31 2011] Spatial fit model total counts = 12.004500, observed total counts = 13.000000
[Sun Sep 25 14:56:31 2011] Offset between fit and detection position for source 12 = 0.686069 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.686069 pixels
  Position = (552.5, 989.6) = 20 32 31.06 41 36 3.8
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 12.0 +/- 3.5
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Sun Sep 25 14:56:31 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 14:56:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 14:56:31 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 14:56:31 2011] Source does appear to be extended
[Sun Sep 25 14:56:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 14:57:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 14:57:11 2011] Initial guess for spatial extent in simple fitting = 0.73"
[Sun Sep 25 14:57:11 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.015
[Sun Sep 25 14:57:11 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.73"
[Sun Sep 25 14:57:15 2011] fullrun_ccd1_acisf10946_pi14-548_cl_pass1_src16.ximg exists
[Sun Sep 25 14:57:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10946_pi14-548_cl_pass1_src16.csv
[Sun Sep 25 14:57:15 2011] fullrun_ccd1_acisf10946_pi14-548_cl_pass1_src16_1.ximg exists
[Sun Sep 25 14:57:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10946_pi14-548_cl_pass1_src16.csv
[Sun Sep 25 14:57:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10946_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10946_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 14:57:15 2011] fullrun_ccd1_acisf10946_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Sun Sep 25 14:57:15 2011] fullrun_ccd1_acisf10946_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Sep 25 14:57:15 2011] Fit fullrun_ccd1_acisf10946_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Sun Sep 25 14:57:27 2011] Spatial fit model total counts = 12.329200, observed total counts = 13.000000
[Sun Sep 25 14:57:27 2011] Offset between fit and detection position for source 12 = 0.061154 pixels
[Sun Sep 25 14:57:27 2011] 12.329000 total counts/ 0.000000 bgd. counts: snr = 34810.049169
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.061154 pixels
  Position = (552.5, 989.6) = 20 32 31.05 41 36 3.7
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 12.3 +/- 3.5
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Sun Sep 25 14:57:27 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 14:57:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 14:57:27 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 14:57:27 2011] Source does appear to be extended
[Sun Sep 25 14:57:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 14:58:43 2011] Not overwriting source region fullrun_ccd1_acisf10946_pi14-548_pass1_cl_src12_src.reg
[Sun Sep 25 14:58:43 2011] Extracting stamp from image fullrun_ccd1_acisf10946_pi14-548_cl_sm2.00.img.gz, (521, 958) - (584, 1021)
[Sun Sep 25 14:58:43 2011] Writing fullrun_ccd1_acisf10946_pi14-548_pass1_cl_src12.gif
[Sun Sep 25 14:59:26 2011] ../../acisf10946/products/events/fullrun_ccd1_acisf10946_pi14-548_pass1_cl_src12_src.evt and ../../acisf10946/products/events/fullrun_ccd1_acisf10946_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Sun Sep 25 14:59:26 2011] Size of ../../acisf10946/products/events/fullrun_ccd1_acisf10946_pi14-548_pass1_cl_src12_src.evt.gz[events] = 13 counts
[Sun Sep 25 14:59:26 2011] Mean chipx,y = (158.92, 656.69)
[Sun Sep 25 14:59:26 2011] Mean tdetx,y = (4475.31, 4265.92)
[Sun Sep 25 14:59:26 2011] chipx,y range = (151.00-179.00, 639.00-670.00)
[Sun Sep 25 14:59:26 2011] Size of ../../acisf10946/products/events/fullrun_ccd1_acisf10946_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 17 counts
[Sun Sep 25 14:59:26 2011] ../../acisf10946/products/images/fullrun_ccd1_acisf10946_pi14-548_pass1_cl_src12_src.img and ../../acisf10946/products/images/fullrun_ccd1_acisf10946_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Sun Sep 25 14:59:26 2011] ../../acisf10946/products/spectra/fullrun_ccd1_acisf10946_pi14-548_pass1_cl_src12_src.pi and ../../acisf10946/products/spectra/fullrun_ccd1_acisf10946_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Sun Sep 25 14:59:26 2011] Not generating rmf since there are only 12 counts
[Sun Sep 25 14:59:32 2011] ../../acisf10946/products/lightcurves/fullrun_ccd1_acisf10946_pi14-548_pass1_cl_src12_src.lc and ../../acisf10946/products/lightcurves/fullrun_ccd1_acisf10946_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Sun Sep 25 15:00:20 2011] 197.754
[Sun Sep 25 15:02:12 2011] Updating aperture counts using extracted products
[Sun Sep 25 15:02:12 2011] Error reading totcts from fullrun_ccd1_acisf10946_pi14-548_pass1_cl_src12_src.pi.gz
[Sun Sep 25 15:02:13 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 15:02:13 2011] Using photon index=1.80, rate=0.000436, arf fullrun_ccd1_acisf10946_pi14-548_pass1_cl_src12.arf
[Sun Sep 25 15:02:13 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 15:02:13 2011] Updating source flux to 6.7e-15
[Sun Sep 25 15:02:17 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Sep 25 15:02:18 2011] acisf10946/analysis//spectral/fullrun_ccd1_acisf10946_pi14-548_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete