[Mon Sep 26 12:55:23 2011] Detection parameters:
  Position = (885.5, 752.6) = 20 31 45.12 41 28 52.1
  Extent = 0.8" x 0.5", rotation angle = 52 degrees
  Source counts = 25.7 +/- 5.2
  Background counts = 1.3
  Rate = 0.0009 +/- 0.0002

[Mon Sep 26 12:55:24 2011] Off-axis axis estimate = 4.10'
[Mon Sep 26 12:56:37 2011] Using EEF radius (= 0.86 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 12:56:37 2011] Initial guess for spatial extent in simple fitting = 0.86"
[Mon Sep 26 12:56:37 2011] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.239
[Mon Sep 26 12:56:37 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.86"
[Mon Sep 26 12:56:39 2011] fullrun_ccd0_acisf10944_pi14-548_cl_pass0_src27.ximg exists
[Mon Sep 26 12:56:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10944_pi14-548_cl_pass0_src27.csv
[Mon Sep 26 12:56:39 2011] fullrun_ccd0_acisf10944_pi14-548_cl_pass0_src27_1.ximg exists
[Mon Sep 26 12:56:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10944_pi14-548_cl_pass0_src27.csv
[Mon Sep 26 12:56:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10944_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10944_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 12:56:40 2011] fullrun_ccd0_acisf10944_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Mon Sep 26 12:56:40 2011] fullrun_ccd0_acisf10944_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Sep 26 12:56:40 2011] Fit fullrun_ccd0_acisf10944_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Mon Sep 26 12:56:56 2011] Spatial fit model total counts = 26.913700, observed total counts = 28.000000
[Mon Sep 26 12:56:56 2011] Offset between fit and detection position for source 28 = 0.469113 pixels
[Mon Sep 26 12:56:56 2011] 27.557719 total counts/ 0.219319 bgd. counts: snr = 58.376085
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.469113 pixels
  Position = (885.8, 753.0) = 20 31 45.13 41 28 52.1
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 27.3 +/- 5.2
  Background counts = 0.2
  Rate = 0.001 +/- 0.0002
[Mon Sep 26 12:56:56 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 12:56:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 12:56:56 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 12:56:56 2011] Source does appear to be extended
[Mon Sep 26 12:56:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 12:57:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 12:57:29 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Mon Sep 26 12:57:29 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.769
[Mon Sep 26 12:57:29 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 0.88"
[Mon Sep 26 12:57:30 2011] fullrun_ccd0_acisf10944_pi14-548_cl_pass1_src25.ximg exists
[Mon Sep 26 12:57:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10944_pi14-548_cl_pass1_src25.csv
[Mon Sep 26 12:57:30 2011] fullrun_ccd0_acisf10944_pi14-548_cl_pass1_src25_1.ximg exists
[Mon Sep 26 12:57:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10944_pi14-548_cl_pass1_src25.csv
[Mon Sep 26 12:57:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10944_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10944_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 12:57:33 2011] fullrun_ccd0_acisf10944_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Mon Sep 26 12:57:33 2011] fullrun_ccd0_acisf10944_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Mon Sep 26 12:57:33 2011] Fit fullrun_ccd0_acisf10944_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Mon Sep 26 12:57:51 2011] Spatial fit model total counts = 27.839600, observed total counts = 28.000000
[Mon Sep 26 12:57:51 2011] Offset between fit and detection position for source 28 = 0.126499 pixels
[Mon Sep 26 12:57:51 2011] 28.124220 total counts/ 2.289520 bgd. counts: snr = 17.073840
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.126499 pixels
  Position = (885.9, 753.1) = 20 31 45.13 41 28 52.1
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 25.8 +/- 5.3
  Background counts = 2.3
  Rate = 0.0009 +/- 0.0002
[Mon Sep 26 12:57:51 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 12:57:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 12:57:51 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 12:57:51 2011] Source does appear to be extended
[Mon Sep 26 12:57:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 12:58:20 2011] Not overwriting source region fullrun_ccd0_acisf10944_pi14-548_pass1_cl_src28_src.reg
[Mon Sep 26 12:58:20 2011] Extracting stamp from image fullrun_ccd0_acisf10944_pi14-548_cl_sm2.00.img.gz, (848, 715) - (924, 791)
[Mon Sep 26 12:58:20 2011] Writing fullrun_ccd0_acisf10944_pi14-548_pass1_cl_src28.gif
[Mon Sep 26 12:59:42 2011] ../../acisf10944/products/events/fullrun_ccd0_acisf10944_pi14-548_pass1_cl_src28_src.evt and ../../acisf10944/products/events/fullrun_ccd0_acisf10944_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Mon Sep 26 12:59:42 2011] Size of ../../acisf10944/products/events/fullrun_ccd0_acisf10944_pi14-548_pass1_cl_src28_src.evt.gz[events] = 27 counts
[Mon Sep 26 12:59:42 2011] Mean chipx,y = (716.11, 754.19)
[Mon Sep 26 12:59:42 2011] Mean tdetx,y = (3815.19, 4415.89)
[Mon Sep 26 12:59:42 2011] chipx,y range = (695.00-734.00, 735.00-768.00)
[Mon Sep 26 12:59:42 2011] Size of ../../acisf10944/products/events/fullrun_ccd0_acisf10944_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 33 counts
[Mon Sep 26 12:59:42 2011] ../../acisf10944/products/images/fullrun_ccd0_acisf10944_pi14-548_pass1_cl_src28_src.img and ../../acisf10944/products/images/fullrun_ccd0_acisf10944_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Mon Sep 26 12:59:42 2011] ../../acisf10944/products/spectra/fullrun_ccd0_acisf10944_pi14-548_pass1_cl_src28_src.pi and ../../acisf10944/products/spectra/fullrun_ccd0_acisf10944_pi14-548_pass1_cl_src28_bgd.pi exist, delete to re-create
[Mon Sep 26 12:59:42 2011] Not generating rmf since there are only 25 counts
[Mon Sep 26 12:59:45 2011] ../../acisf10944/products/lightcurves/fullrun_ccd0_acisf10944_pi14-548_pass1_cl_src28_src.lc and ../../acisf10944/products/lightcurves/fullrun_ccd0_acisf10944_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Mon Sep 26 13:00:03 2011] 191.44
[Mon Sep 26 13:05:21 2011] Updating aperture counts using extracted products
[Mon Sep 26 13:05:21 2011] Error reading totcts from fullrun_ccd0_acisf10944_pi14-548_pass1_cl_src28_src.pi.gz
[Mon Sep 26 13:05:21 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 13:05:21 2011] Using photon index=1.80, rate=0.000913, arf fullrun_ccd0_acisf10944_pi14-548_pass1_cl_src28.arf
[Mon Sep 26 13:05:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 13:05:21 2011] Updating source flux to 1.5e-14
[Mon Sep 26 13:05:28 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting