[Thu Oct 20 20:11:08 2011] Detection parameters:
  Position = (429.6, 927.9) = 20 30 52.19 41 27 2.2
  Extent = 1.9" x 1.2", rotation angle = 102 degrees
  Source counts = 15.4 +/- 4.5
  Background counts = 4.6
  Rate = 0.0006 +/- 0.0002

[Thu Oct 20 20:11:09 2011] Off-axis axis estimate = 7.17'
[Thu Oct 20 20:12:16 2011] Using EEF radius (= 2.28 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 20:12:16 2011] Initial guess for spatial extent in simple fitting = 2.28"
[Thu Oct 20 20:12:16 2011] source mask rpix=4.6, npix_max = 105, mask sum = 100, frac = 0.945
[Thu Oct 20 20:12:16 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 2.28"
[Thu Oct 20 20:12:17 2011] fullrun_ccd3_acisf10942_pi14-548_cl_pass0_src13.ximg exists
[Thu Oct 20 20:12:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10942_pi14-548_cl_pass0_src13.csv
[Thu Oct 20 20:12:17 2011] fullrun_ccd3_acisf10942_pi14-548_cl_pass0_src13_1.ximg exists
[Thu Oct 20 20:12:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10942_pi14-548_cl_pass0_src13.csv
[Thu Oct 20 20:12:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10942_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10942_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 20:12:18 2011] fullrun_ccd3_acisf10942_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Thu Oct 20 20:12:18 2011] fullrun_ccd3_acisf10942_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Oct 20 20:12:18 2011] Fit fullrun_ccd3_acisf10942_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Oct 20 20:12:41 2011] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 25.912553 pixels away
[Thu Oct 20 20:12:41 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 20:12:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 20:12:41 2011] Assessing source extent using major
[Thu Oct 20 20:12:41 2011] Source does appear to be extended
[Thu Oct 20 20:12:41 2011] Computing asymmetry using major and minor axis, asym = 1.56
[Thu Oct 20 20:12:41 2011] Source is asymmetric
[Thu Oct 20 20:13:13 2011] Using EEF radius (= 2.28 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 20:13:13 2011] Initial guess for spatial extent in simple fitting = 2.28"
[Thu Oct 20 20:13:13 2011] source mask rpix=4.6, npix_max = 105, mask sum = 100, frac = 0.945
[Thu Oct 20 20:13:13 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 2.28"
[Thu Oct 20 20:13:17 2011] fullrun_ccd3_acisf10942_pi14-548_cl_pass1_src13.ximg exists
[Thu Oct 20 20:13:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10942_pi14-548_cl_pass1_src13.csv
[Thu Oct 20 20:13:17 2011] fullrun_ccd3_acisf10942_pi14-548_cl_pass1_src13_1.ximg exists
[Thu Oct 20 20:13:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10942_pi14-548_cl_pass1_src13.csv
[Thu Oct 20 20:13:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10942_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10942_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 20:13:17 2011] fullrun_ccd3_acisf10942_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Thu Oct 20 20:13:17 2011] fullrun_ccd3_acisf10942_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Oct 20 20:13:17 2011] Fit fullrun_ccd3_acisf10942_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Oct 20 20:13:37 2011] Spatial fit model total counts = 27.001000, observed total counts = 27.000000
[Thu Oct 20 20:13:37 2011] Offset between fit and detection position for source 39 = 3.146210 pixels
[Thu Oct 20 20:13:37 2011] 27.292840 total counts/ 18.939800 bgd. counts: snr = 1.919362
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 3.146210 pixels
  Position = (431.4, 925.2) = 20 30 52.14 41 27 0.6
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 8.4 +/- 5.2
  Background counts = 18.9
  Rate = 0.0003 +/- 0.0002
[Thu Oct 20 20:13:37 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 20:13:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 20:13:37 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 20:13:37 2011] Source does appear to be extended
[Thu Oct 20 20:13:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 20:19:07 2011] Not overwriting source region fullrun_ccd3_acisf10942_pi14-548_pass1_cl_src39_src.reg
[Thu Oct 20 20:19:07 2011] Extracting stamp from image fullrun_ccd3_acisf10942_pi14-548_cl_sm2.00.img.gz, (395, 889) - (468, 962)
[Thu Oct 20 20:19:07 2011] Writing fullrun_ccd3_acisf10942_pi14-548_pass1_cl_src39.gif
[Thu Oct 20 20:19:43 2011] ../../acisf10942/products/events/fullrun_ccd3_acisf10942_pi14-548_pass1_cl_src39_src.evt and ../../acisf10942/products/events/fullrun_ccd3_acisf10942_pi14-548_pass1_cl_src39_bgd.evt exist, delete to re-create
[Thu Oct 20 20:19:43 2011] Size of ../../acisf10942/products/events/fullrun_ccd3_acisf10942_pi14-548_pass1_cl_src39_src.evt.gz[events] = 11 counts
[Thu Oct 20 20:19:43 2011] Mean chipx,y = (150.27, 664.09)
[Thu Oct 20 20:19:43 2011] Mean tdetx,y = (4467.91, 3211.27)
[Thu Oct 20 20:19:43 2011] chipx,y range = (135.00-166.00, 647.00-679.00)
[Thu Oct 20 20:19:43 2011] Size of ../../acisf10942/products/events/fullrun_ccd3_acisf10942_pi14-548_pass1_cl_src39_bgd.evt.gz[events] = 31 counts
[Thu Oct 20 20:19:43 2011] ../../acisf10942/products/images/fullrun_ccd3_acisf10942_pi14-548_pass1_cl_src39_src.img and ../../acisf10942/products/images/fullrun_ccd3_acisf10942_pi14-548_pass1_cl_src39_bgd.img exist, delete to re-create
[Thu Oct 20 20:19:43 2011] ../../acisf10942/products/spectra/fullrun_ccd3_acisf10942_pi14-548_pass1_cl_src39_src.pi and ../../acisf10942/products/spectra/fullrun_ccd3_acisf10942_pi14-548_pass1_cl_src39_bgd.pi exist, delete to re-create
[Thu Oct 20 20:19:43 2011] Not generating rmf since there are only 8 counts
[Thu Oct 20 20:19:46 2011] ../../acisf10942/products/lightcurves/fullrun_ccd3_acisf10942_pi14-548_pass1_cl_src39_src.lc and ../../acisf10942/products/lightcurves/fullrun_ccd3_acisf10942_pi14-548_pass1_cl_src39_bgd.lc exist, delete to re-create
[Thu Oct 20 20:20:57 2011] 169.097
[Thu Oct 20 20:21:14 2011] Updating aperture counts using extracted products
[Thu Oct 20 20:21:14 2011] Error reading totcts from fullrun_ccd3_acisf10942_pi14-548_pass1_cl_src39_src.pi.gz
[Thu Oct 20 20:21:15 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 20:21:15 2011] Using photon index=1.80, rate=0.000309, arf fullrun_ccd3_acisf10942_pi14-548_pass1_cl_src39.arf
[Thu Oct 20 20:21:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 20:21:15 2011] Updating source flux to 5.6e-15
[Thu Oct 20 20:21:39 2011] Source 39 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct 20 20:21:40 2011] acisf10942/analysis//spectral/fullrun_ccd3_acisf10942_pi14-548_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete