[Thu Oct 20 20:11:04 2011] Detection parameters:
  Position = (521.5, 332.1) = 20 31 33.35 41 22 47.9
  Extent = 1.1" x 0.7", rotation angle = 22 degrees
  Source counts = 42.6 +/- 6.7
  Background counts = 2.4
  Rate = 0.002 +/- 0.0002

[Thu Oct 20 20:11:06 2011] Off-axis axis estimate = 4.77'
[Thu Oct 20 20:12:15 2011] Using EEF radius (= 1.09 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 20:12:15 2011] Initial guess for spatial extent in simple fitting = 1.09"
[Thu Oct 20 20:12:15 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.015
[Thu Oct 20 20:12:15 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.09"
[Thu Oct 20 20:12:16 2011] fullrun_ccd2_acisf10942_pi14-548_cl_pass0_src3.ximg exists
[Thu Oct 20 20:12:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10942_pi14-548_cl_pass0_src3.csv
[Thu Oct 20 20:12:16 2011] fullrun_ccd2_acisf10942_pi14-548_cl_pass0_src3_1.ximg exists
[Thu Oct 20 20:12:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10942_pi14-548_cl_pass0_src3.csv
[Thu Oct 20 20:12:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10942_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10942_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 20:12:16 2011] fullrun_ccd2_acisf10942_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Thu Oct 20 20:12:16 2011] fullrun_ccd2_acisf10942_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Oct 20 20:12:16 2011] Fit fullrun_ccd2_acisf10942_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Oct 20 20:12:36 2011] Spatial fit model total counts = 47.462700, observed total counts = 48.000000
[Thu Oct 20 20:12:36 2011] Offset between fit and detection position for source 6 = 0.425780 pixels
[Thu Oct 20 20:12:36 2011] 48.645470 total counts/ 9.420870 bgd. counts: snr = 12.779475
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.425780 pixels
  Position = (521.6, 332.5) = 20 31 33.37 41 22 47.8
  Extent = 1.1 (0.7-1.4)", rotation angle = 0
  Source counts = 39.2 +/- 7.0
  Background counts = 9.4
  Rate = 0.001 +/- 0.0003
[Thu Oct 20 20:12:36 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 20:12:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 20:12:36 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 20:12:36 2011] Source does appear to be extended
[Thu Oct 20 20:12:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 20:13:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 20:13:11 2011] Initial guess for spatial extent in simple fitting = 1.10"
[Thu Oct 20 20:13:11 2011] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.831
[Thu Oct 20 20:13:11 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.10"
[Thu Oct 20 20:13:12 2011] fullrun_ccd2_acisf10942_pi14-548_cl_pass1_src3.ximg exists
[Thu Oct 20 20:13:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10942_pi14-548_cl_pass1_src3.csv
[Thu Oct 20 20:13:12 2011] fullrun_ccd2_acisf10942_pi14-548_cl_pass1_src3_1.ximg exists
[Thu Oct 20 20:13:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10942_pi14-548_cl_pass1_src3.csv
[Thu Oct 20 20:13:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10942_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10942_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 20:13:12 2011] fullrun_ccd2_acisf10942_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Thu Oct 20 20:13:12 2011] fullrun_ccd2_acisf10942_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Oct 20 20:13:12 2011] Fit fullrun_ccd2_acisf10942_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Oct 20 20:13:34 2011] Spatial fit model total counts = 47.626000, observed total counts = 48.000000
[Thu Oct 20 20:13:34 2011] Offset between fit and detection position for source 6 = 0.042497 pixels
[Thu Oct 20 20:13:34 2011] 48.869820 total counts/ 9.384420 bgd. counts: snr = 12.889404
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.042497 pixels
  Position = (521.5, 332.5) = 20 31 33.38 41 22 47.8
  Extent = 1.1 (0.7-1.4)", rotation angle = 0
  Source counts = 39.5 +/- 7.0
  Background counts = 9.4
  Rate = 0.001 +/- 0.0003
[Thu Oct 20 20:13:34 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 20:13:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 20:13:34 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 20:13:34 2011] Source does appear to be extended
[Thu Oct 20 20:13:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 20:17:10 2011] Not overwriting source region fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src6_src.reg
[Thu Oct 20 20:17:10 2011] Extracting stamp from image fullrun_ccd2_acisf10942_pi14-548_cl_sm2.00.img.gz, (471, 282) - (572, 383)
[Thu Oct 20 20:17:10 2011] Writing fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src6.gif
[Thu Oct 20 20:17:17 2011] ../../acisf10942/products/events/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src6_src.evt and ../../acisf10942/products/events/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Thu Oct 20 20:17:17 2011] Size of ../../acisf10942/products/events/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src6_src.evt.gz[events] = 48 counts
[Thu Oct 20 20:17:17 2011] Mean chipx,y = (293.48, 502.04)
[Thu Oct 20 20:17:17 2011] Mean tdetx,y = (3563.04, 3792.52)
[Thu Oct 20 20:17:17 2011] chipx,y range = (270.00-311.00, 484.00-525.00)
[Thu Oct 20 20:17:17 2011] Size of ../../acisf10942/products/events/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 27 counts
[Thu Oct 20 20:17:17 2011] ../../acisf10942/products/images/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src6_src.img and ../../acisf10942/products/images/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Thu Oct 20 20:17:17 2011] ../../acisf10942/products/spectra/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src6_src.pi and ../../acisf10942/products/spectra/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Thu Oct 20 20:17:17 2011] Not generating rmf since there are only 39 counts
[Thu Oct 20 20:17:21 2011] ../../acisf10942/products/lightcurves/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src6_src.lc and ../../acisf10942/products/lightcurves/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Thu Oct 20 20:19:06 2011] 183.937
[Thu Oct 20 20:21:13 2011] Updating aperture counts using extracted products
[Thu Oct 20 20:21:13 2011] Error reading totcts from fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src6_src.pi.gz
[Thu Oct 20 20:21:14 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 20:21:14 2011] Using photon index=1.80, rate=0.00146, arf fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src6.arf
[Thu Oct 20 20:21:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 20:21:14 2011] Updating source flux to 2.4e-14
[Thu Oct 20 20:21:30 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting