[Thu Oct 20 20:11:03 2011] Detection parameters:
  Position = (432.6, 430.2) = 20 31 37.25 41 23 36.1
  Extent = 1.5" x 0.8", rotation angle = 26 degrees
  Source counts = 120.8 +/- 11.2
  Background counts = 5.2
  Rate = 0.004 +/- 0.0004

[Thu Oct 20 20:11:06 2011] Off-axis axis estimate = 5.79'
[Thu Oct 20 20:12:15 2011] Using EEF radius (= 1.53 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 20:12:15 2011] Initial guess for spatial extent in simple fitting = 1.53"
[Thu Oct 20 20:12:15 2011] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.942
[Thu Oct 20 20:12:15 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.53"
[Thu Oct 20 20:12:15 2011] fullrun_ccd2_acisf10942_pi14-548_cl_pass0_src2.ximg exists
[Thu Oct 20 20:12:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10942_pi14-548_cl_pass0_src2.csv
[Thu Oct 20 20:12:16 2011] fullrun_ccd2_acisf10942_pi14-548_cl_pass0_src2_1.ximg exists
[Thu Oct 20 20:12:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10942_pi14-548_cl_pass0_src2.csv
[Thu Oct 20 20:12:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10942_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10942_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 20:12:16 2011] fullrun_ccd2_acisf10942_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Thu Oct 20 20:12:16 2011] fullrun_ccd2_acisf10942_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Oct 20 20:12:16 2011] Fit fullrun_ccd2_acisf10942_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Oct 20 20:12:36 2011] Spatial fit model total counts = 129.314000, observed total counts = 127.000000
[Thu Oct 20 20:12:36 2011] Offset between fit and detection position for source 1 = 1.511883 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.511883 pixels
  Position = (433.8, 431.1) = 20 31 37.22 41 23 36.3
  Extent = 1.6 (1.5-1.8)", rotation angle = 0
  Source counts = 127.6 +/- 11.3
  Background counts = 0.0
  Rate = 0.005 +/- 0.0004
[Thu Oct 20 20:12:36 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 20:12:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 20:12:36 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 20:12:36 2011] Source does appear to be extended
[Thu Oct 20 20:12:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 20:13:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 20:13:11 2011] Initial guess for spatial extent in simple fitting = 1.62"
[Thu Oct 20 20:13:11 2011] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.117
[Thu Oct 20 20:13:11 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.62"
[Thu Oct 20 20:13:12 2011] fullrun_ccd2_acisf10942_pi14-548_cl_pass1_src2.ximg exists
[Thu Oct 20 20:13:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10942_pi14-548_cl_pass1_src2.csv
[Thu Oct 20 20:13:12 2011] fullrun_ccd2_acisf10942_pi14-548_cl_pass1_src2_1.ximg exists
[Thu Oct 20 20:13:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10942_pi14-548_cl_pass1_src2.csv
[Thu Oct 20 20:13:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10942_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10942_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 20:13:12 2011] fullrun_ccd2_acisf10942_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Thu Oct 20 20:13:12 2011] fullrun_ccd2_acisf10942_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Oct 20 20:13:12 2011] Fit fullrun_ccd2_acisf10942_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Oct 20 20:13:34 2011] Spatial fit model total counts = 126.483000, observed total counts = 127.000000
[Thu Oct 20 20:13:34 2011] Offset between fit and detection position for source 1 = 0.237936 pixels
[Thu Oct 20 20:13:34 2011] 125.407950 total counts/ 4.753950 bgd. counts: snr = 55.336848
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.237936 pixels
  Position = (433.5, 431.1) = 20 31 37.23 41 23 36.3
  Extent = 1.5 (1.3-1.8)", rotation angle = 0
  Source counts = 120.7 +/- 11.2
  Background counts = 4.8
  Rate = 0.004 +/- 0.0004
[Thu Oct 20 20:13:34 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 20:13:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 20:13:34 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 20:13:34 2011] Source does appear to be extended
[Thu Oct 20 20:13:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 20:17:10 2011] Not overwriting source region fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src1_src.reg
[Thu Oct 20 20:17:10 2011] Extracting stamp from image fullrun_ccd2_acisf10942_pi14-548_cl_sm2.00.img.gz, (363, 360) - (504, 502)
[Thu Oct 20 20:17:10 2011] Writing fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src1.gif
[Thu Oct 20 20:17:14 2011] ../../acisf10942/products/events/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src1_src.evt and ../../acisf10942/products/events/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Oct 20 20:17:14 2011] Size of ../../acisf10942/products/events/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src1_src.evt.gz[events] = 131 counts
[Thu Oct 20 20:17:14 2011] Mean chipx,y = (382.73, 408.42)
[Thu Oct 20 20:17:14 2011] Mean tdetx,y = (3469.42, 3703.27)
[Thu Oct 20 20:17:14 2011] chipx,y range = (360.00-404.00, 385.00-435.00)
[Thu Oct 20 20:17:14 2011] Size of ../../acisf10942/products/events/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 66 counts
[Thu Oct 20 20:17:14 2011] ../../acisf10942/products/images/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src1_src.img and ../../acisf10942/products/images/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Oct 20 20:17:14 2011] ../../acisf10942/products/spectra/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src1_src.pi and ../../acisf10942/products/spectra/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Oct 20 20:17:17 2011] ../../acisf10942/products/lightcurves/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src1_src.lc and ../../acisf10942/products/lightcurves/fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Oct 20 20:19:06 2011] Keeping rmf generated by specextract
[Thu Oct 20 20:19:06 2011] 177.908
[Thu Oct 20 20:21:13 2011] Updating aperture counts using extracted products
[Thu Oct 20 20:21:13 2011] Error reading totcts from fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Oct 20 20:21:14 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 20:21:14 2011] Using photon index=1.80, rate=0.00447, arf fullrun_ccd2_acisf10942_pi14-548_pass1_cl_src1.arf
[Thu Oct 20 20:21:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 20:21:14 2011] Updating source flux to 7.6e-14