[Thu Oct 20 20:11:00 2011] Detection parameters:
  Position = (778.3, 698.0) = 20 30 40.52 41 16 33.8
  Extent = 1.9" x 1.3", rotation angle = 84 degrees
  Source counts = 298.8 +/- 17.8
  Background counts = 18.2
  Rate = 0.01 +/- 0.0007

[Thu Oct 20 20:11:03 2011] Off-axis axis estimate = 6.99'
[Thu Oct 20 20:12:13 2011] Using EEF radius (= 2.18 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 20:12:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 20:12:13 2011] Initial guess for spatial extent in simple fitting = 2.18"
[Thu Oct 20 20:12:13 2011] source mask rpix=4.4, npix_max = 97, mask sum = 100, frac = 1.031
[Thu Oct 20 20:12:13 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.18"
[Thu Oct 20 20:12:14 2011] fullrun_ccd1_acisf10942_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 20 20:12:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10942_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 20:12:14 2011] fullrun_ccd1_acisf10942_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 20 20:12:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10942_pi14-548_cl_pass0_src1.csv
[Thu Oct 20 20:12:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10942_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10942_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 20:12:14 2011] fullrun_ccd1_acisf10942_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 20 20:12:14 2011] fullrun_ccd1_acisf10942_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 20 20:12:14 2011] Fit fullrun_ccd1_acisf10942_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 20 20:12:33 2011] Spatial fit model total counts = 325.468000, observed total counts = 328.000000
[Thu Oct 20 20:12:33 2011] Offset between fit and detection position for source 6 = 0.698075 pixels
[Thu Oct 20 20:12:33 2011] 325.686600 total counts/ 61.009600 bgd. counts: snr = 33.885751
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.698075 pixels
  Position = (778.7, 698.5) = 20 30 40.52 41 16 33.8
  Extent = 1.6 (1.4-1.7)", rotation angle = 0
  Source counts = 264.7 +/- 18.0
  Background counts = 61.0
  Rate = 0.01 +/- 0.0007
[Thu Oct 20 20:12:33 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 20:12:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 20:12:33 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 20:12:33 2011] Source does appear to be extended
[Thu Oct 20 20:12:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 20:13:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 20:13:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 20:13:09 2011] Initial guess for spatial extent in simple fitting = 1.57"
[Thu Oct 20 20:13:09 2011] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.895
[Thu Oct 20 20:13:09 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.57"
[Thu Oct 20 20:13:10 2011] fullrun_ccd1_acisf10942_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 20 20:13:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10942_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 20:13:10 2011] fullrun_ccd1_acisf10942_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 20 20:13:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10942_pi14-548_cl_pass1_src1.csv
[Thu Oct 20 20:13:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10942_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10942_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 20:13:10 2011] fullrun_ccd1_acisf10942_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 20 20:13:10 2011] fullrun_ccd1_acisf10942_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 20 20:13:10 2011] Fit fullrun_ccd1_acisf10942_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 20 20:13:29 2011] Spatial fit model total counts = 304.128000, observed total counts = 307.000000
[Thu Oct 20 20:13:29 2011] Offset between fit and detection position for source 6 = 0.052250 pixels
[Thu Oct 20 20:13:29 2011] 304.800600 total counts/ 55.473600 bgd. counts: snr = 33.475428
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.052250 pixels
  Position = (778.7, 698.5) = 20 30 40.52 41 16 33.8
  Extent = 1.5 (1.3-1.6)", rotation angle = 0
  Source counts = 249.3 +/- 17.5
  Background counts = 55.5
  Rate = 0.009 +/- 0.0006
[Thu Oct 20 20:13:30 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 20:13:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 20:13:30 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 20:13:30 2011] Source does appear to be extended
[Thu Oct 20 20:13:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 20:15:04 2011] Not overwriting source region fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src6_src.reg
[Thu Oct 20 20:15:04 2011] Extracting stamp from image fullrun_ccd1_acisf10942_pi14-548_cl_sm2.00.img.gz, (711, 631) - (846, 766)
[Thu Oct 20 20:15:04 2011] Writing fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src6.gif
[Thu Oct 20 20:15:07 2011] ../../acisf10942/products/events/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src6_src.evt and ../../acisf10942/products/events/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Thu Oct 20 20:15:07 2011] Size of ../../acisf10942/products/events/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src6_src.evt.gz[events] = 297 counts
[Thu Oct 20 20:15:07 2011] Mean chipx,y = (359.77, 300.59)
[Thu Oct 20 20:15:07 2011] Mean tdetx,y = (4831.41, 4466.77)
[Thu Oct 20 20:15:07 2011] chipx,y range = (333.00-386.00, 274.00-326.00)
[Thu Oct 20 20:15:07 2011] Size of ../../acisf10942/products/events/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 78 counts
[Thu Oct 20 20:15:07 2011] ../../acisf10942/products/images/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src6_src.img and ../../acisf10942/products/images/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Thu Oct 20 20:15:07 2011] ../../acisf10942/products/spectra/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src6_src.pi and ../../acisf10942/products/spectra/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Thu Oct 20 20:15:10 2011] ../../acisf10942/products/lightcurves/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src6_src.lc and ../../acisf10942/products/lightcurves/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Thu Oct 20 20:17:08 2011] Keeping rmf generated by specextract
[Thu Oct 20 20:17:08 2011] 181.071
[Thu Oct 20 20:21:12 2011] Updating aperture counts using extracted products
[Thu Oct 20 20:21:12 2011] Error reading totcts from fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src6_src.pi.gz
[Thu Oct 20 20:21:13 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 20:21:13 2011] Using photon index=1.80, rate=0.00924, arf fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src6.arf
[Thu Oct 20 20:21:13 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 20:21:13 2011] Updating source flux to 1.6e-13
[Thu Oct 20 20:21:30 2011] Reading fit data from acisf10942/analysis//spectral/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src6_pl.csv
[Thu Oct 20 20:21:30 2011] Spectral fit parameter nH value = 1.24047e+22
[Thu Oct 20 20:21:30 2011] Spectral fit parameter PhoIndex value = 1.94243
[Thu Oct 20 20:21:30 2011] Failed to get F(0.3-8.0) from acisf10942/analysis//spectral/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Thu Oct 20 20:21:30 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 20:21:30 2011] Using Nh = 1.2e+22, photon index=1.94, rate=0.00924, arf fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src6.arf
[Thu Oct 20 20:21:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 20:21:30 2011] Updating source flux to 1.5e-13