[Thu Oct 20 20:11:00 2011] Detection parameters:
  Position = (651.7, 275.8) = 20 30 46.06 41 13 6.2
  Extent = 3.1" x 2.8", rotation angle = 74 degrees
  Source counts = 105.3 +/- 11.4
  Background counts = 25.7
  Rate = 0.004 +/- 0.0004

[Thu Oct 20 20:11:03 2011] Off-axis axis estimate = 8.90'
[Thu Oct 20 20:12:13 2011] Using EEF radius (= 3.50 ")to estimate initial spatial extent for simple fitting
[Thu Oct 20 20:12:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 20:12:13 2011] Initial guess for spatial extent in simple fitting = 3.50"
[Thu Oct 20 20:12:13 2011] source mask rpix=7.1, npix_max = 231, mask sum = 225, frac = 0.971
[Thu Oct 20 20:12:13 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 3.50"
[Thu Oct 20 20:12:14 2011] fullrun_ccd1_acisf10942_pi14-548_cl_pass0_src2.ximg exists
[Thu Oct 20 20:12:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10942_pi14-548_cl_pass0_src2.csv
[Thu Oct 20 20:12:14 2011] fullrun_ccd1_acisf10942_pi14-548_cl_pass0_src2_1.ximg exists
[Thu Oct 20 20:12:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10942_pi14-548_cl_pass0_src2.csv
[Thu Oct 20 20:12:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10942_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10942_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 20:12:14 2011] fullrun_ccd1_acisf10942_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Thu Oct 20 20:12:14 2011] fullrun_ccd1_acisf10942_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Oct 20 20:12:14 2011] Fit fullrun_ccd1_acisf10942_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Oct 20 20:12:33 2011] Spatial fit model total counts = 129.901000, observed total counts = 129.000000
[Thu Oct 20 20:12:33 2011] Offset between fit and detection position for source 2 = 0.798094 pixels
[Thu Oct 20 20:12:33 2011] 130.271800 total counts/ 32.741900 bgd. counts: snr = 17.044562
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.798094 pixels
  Position = (652.4, 276.3) = 20 30 46.06 41 13 6.2
  Extent = 2.9 (2.3-3.7)", rotation angle = 0
  Source counts = 97.5 +/- 11.4
  Background counts = 32.7
  Rate = 0.004 +/- 0.0004
[Thu Oct 20 20:12:33 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 20:12:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 20:12:33 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 20:12:33 2011] Source does appear to be extended
[Thu Oct 20 20:12:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 20:13:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 20:13:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 20 20:13:09 2011] Initial guess for spatial extent in simple fitting = 2.94"
[Thu Oct 20 20:13:09 2011] source mask rpix=6.0, npix_max = 167, mask sum = 169, frac = 1.006
[Thu Oct 20 20:13:09 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 2.94"
[Thu Oct 20 20:13:10 2011] fullrun_ccd1_acisf10942_pi14-548_cl_pass1_src2.ximg exists
[Thu Oct 20 20:13:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10942_pi14-548_cl_pass1_src2.csv
[Thu Oct 20 20:13:10 2011] fullrun_ccd1_acisf10942_pi14-548_cl_pass1_src2_1.ximg exists
[Thu Oct 20 20:13:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10942_pi14-548_cl_pass1_src2.csv
[Thu Oct 20 20:13:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10942_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10942_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 20:13:10 2011] fullrun_ccd1_acisf10942_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Thu Oct 20 20:13:11 2011] fullrun_ccd1_acisf10942_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Oct 20 20:13:11 2011] Fit fullrun_ccd1_acisf10942_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Oct 20 20:13:29 2011] Spatial fit model total counts = 120.999000, observed total counts = 121.000000
[Thu Oct 20 20:13:29 2011] Offset between fit and detection position for source 2 = 0.115142 pixels
[Thu Oct 20 20:13:29 2011] 121.327500 total counts/ 33.829000 bgd. counts: snr = 15.043747
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.115142 pixels
  Position = (652.4, 276.2) = 20 30 46.06 41 13 6.1
  Extent = 2.7 (1.5-3.7)", rotation angle = 0
  Source counts = 87.5 +/- 11.0
  Background counts = 33.8
  Rate = 0.003 +/- 0.0004
[Thu Oct 20 20:13:30 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 20:13:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 20:13:30 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 20:13:30 2011] Source does appear to be extended
[Thu Oct 20 20:13:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 20:15:04 2011] Not overwriting source region fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src2_src.reg
[Thu Oct 20 20:15:04 2011] Extracting stamp from image fullrun_ccd1_acisf10942_pi14-548_cl_sm2.00.img.gz, (530, 154) - (775, 399)
[Thu Oct 20 20:15:04 2011] Writing fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src2.gif
[Thu Oct 20 20:15:10 2011] ../../acisf10942/products/events/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src2_src.evt and ../../acisf10942/products/events/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu Oct 20 20:15:10 2011] Size of ../../acisf10942/products/events/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src2_src.evt.gz[events] = 125 counts
[Thu Oct 20 20:15:10 2011] Mean chipx,y = (789.82, 396.97)
[Thu Oct 20 20:15:10 2011] Mean tdetx,y = (4735.03, 4896.82)
[Thu Oct 20 20:15:10 2011] chipx,y range = (761.00-820.00, 365.00-433.00)
[Thu Oct 20 20:15:10 2011] Size of ../../acisf10942/products/events/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 220 counts
[Thu Oct 20 20:15:10 2011] ../../acisf10942/products/images/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src2_src.img and ../../acisf10942/products/images/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu Oct 20 20:15:10 2011] ../../acisf10942/products/spectra/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src2_src.pi and ../../acisf10942/products/spectra/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Thu Oct 20 20:15:10 2011] Not generating rmf since there are only 87 counts
[Thu Oct 20 20:15:13 2011] ../../acisf10942/products/lightcurves/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src2_src.lc and ../../acisf10942/products/lightcurves/fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu Oct 20 20:17:08 2011] 156.472
[Thu Oct 20 20:21:12 2011] Updating aperture counts using extracted products
[Thu Oct 20 20:21:12 2011] Error reading totcts from fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src2_src.pi.gz
[Thu Oct 20 20:21:13 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 20:21:13 2011] Using photon index=1.80, rate=0.00324, arf fullrun_ccd1_acisf10942_pi14-548_pass1_cl_src2.arf
[Thu Oct 20 20:21:13 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 20:21:13 2011] Updating source flux to 6.3e-14
[Thu Oct 20 20:21:25 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting