[Thu Oct  6 02:01:47 2011] Detection parameters:
  Position = (211.9, 488.2) = 20 32 6.60 41 16 55.3
  Extent = 1.6" x 1.2", rotation angle = 66 degrees
  Source counts = 20.6 +/- 5.0
  Background counts = 4.4
  Rate = 0.0007 +/- 0.0002

[Thu Oct  6 02:01:50 2011] Off-axis axis estimate = 7.65'
[Thu Oct  6 02:03:43 2011] Using EEF radius (= 2.59 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 02:03:43 2011] Initial guess for spatial extent in simple fitting = 2.59"
[Thu Oct  6 02:03:43 2011] source mask rpix=5.3, npix_max = 132, mask sum = 144, frac = 1.084
[Thu Oct  6 02:03:43 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 2.59"
[Thu Oct  6 02:03:46 2011] fullrun_ccd2_acisf10941_pi14-548_cl_pass0_src16.ximg exists
[Thu Oct  6 02:03:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10941_pi14-548_cl_pass0_src16.csv
[Thu Oct  6 02:03:46 2011] fullrun_ccd2_acisf10941_pi14-548_cl_pass0_src16_1.ximg exists
[Thu Oct  6 02:03:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10941_pi14-548_cl_pass0_src16.csv
[Thu Oct  6 02:03:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10941_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10941_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 02:03:51 2011] fullrun_ccd2_acisf10941_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Thu Oct  6 02:03:51 2011] fullrun_ccd2_acisf10941_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Thu Oct  6 02:03:51 2011] Fit fullrun_ccd2_acisf10941_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Thu Oct  6 02:04:15 2011] Spatial fit model total counts = 39.642400, observed total counts = 39.000000
[Thu Oct  6 02:04:15 2011] Offset between fit and detection position for source 23 = 0.858036 pixels
[Thu Oct  6 02:04:15 2011] 39.802300 total counts/ 20.777800 bgd. counts: snr = 4.173625
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.858036 pixels
  Position = (212.7, 487.9) = 20 32 6.58 41 16 54.9
  Extent = 1.6 (1.0-2.5)", rotation angle = 0
  Source counts = 19.0 +/- 6.3
  Background counts = 20.8
  Rate = 0.0006 +/- 0.0002
[Thu Oct  6 02:04:15 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 02:04:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 02:04:15 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 02:04:15 2011] Source does appear to be extended
[Thu Oct  6 02:04:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 02:05:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 02:05:25 2011] Initial guess for spatial extent in simple fitting = 1.56"
[Thu Oct  6 02:05:25 2011] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.044
[Thu Oct  6 02:05:25 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 1.56"
[Thu Oct  6 02:05:26 2011] fullrun_ccd2_acisf10941_pi14-548_cl_pass1_src16.ximg exists
[Thu Oct  6 02:05:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10941_pi14-548_cl_pass1_src16.csv
[Thu Oct  6 02:05:26 2011] fullrun_ccd2_acisf10941_pi14-548_cl_pass1_src16_1.ximg exists
[Thu Oct  6 02:05:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10941_pi14-548_cl_pass1_src16.csv
[Thu Oct  6 02:05:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10941_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10941_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 02:05:26 2011] fullrun_ccd2_acisf10941_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Thu Oct  6 02:05:26 2011] fullrun_ccd2_acisf10941_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Oct  6 02:05:26 2011] Fit fullrun_ccd2_acisf10941_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Thu Oct  6 02:05:49 2011] Spatial fit model total counts = 28.181000, observed total counts = 28.000000
[Thu Oct  6 02:05:49 2011] Offset between fit and detection position for source 23 = 1.019711 pixels
[Thu Oct  6 02:05:49 2011] 28.856200 total counts/ 11.909900 bgd. counts: snr = 4.910445
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.019711 pixels
  Position = (211.9, 487.2) = 20 32 6.62 41 16 54.6
  Extent = 1.5 (0.9-3.1)", rotation angle = 0
  Source counts = 16.9 +/- 5.4
  Background counts = 11.9
  Rate = 0.0006 +/- 0.0002
[Thu Oct  6 02:05:50 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 02:05:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 02:05:50 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 02:05:50 2011] Source does appear to be extended
[Thu Oct  6 02:05:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 02:14:31 2011] Not overwriting source region fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src23_src.reg
[Thu Oct  6 02:14:31 2011] Extracting stamp from image fullrun_ccd2_acisf10941_pi14-548_cl_sm2.00.img.gz, (142, 417) - (282, 557)
[Thu Oct  6 02:14:31 2011] Writing fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src23.gif
[Thu Oct  6 02:15:55 2011] ../../acisf10941/products/events/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src23_src.evt and ../../acisf10941/products/events/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Thu Oct  6 02:15:55 2011] Size of ../../acisf10941/products/events/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src23_src.evt.gz[events] = 28 counts
[Thu Oct  6 02:15:55 2011] Mean chipx,y = (446.68, 190.00)
[Thu Oct  6 02:15:55 2011] Mean tdetx,y = (3251.00, 3639.32)
[Thu Oct  6 02:15:55 2011] chipx,y range = (424.00-468.00, 175.00-205.00)
[Thu Oct  6 02:15:55 2011] Size of ../../acisf10941/products/events/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 91 counts
[Thu Oct  6 02:15:55 2011] ../../acisf10941/products/images/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src23_src.img and ../../acisf10941/products/images/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Thu Oct  6 02:15:55 2011] ../../acisf10941/products/spectra/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src23_src.pi and ../../acisf10941/products/spectra/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Thu Oct  6 02:15:55 2011] Not generating rmf since there are only 16 counts
[Thu Oct  6 02:15:58 2011] ../../acisf10941/products/lightcurves/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src23_src.lc and ../../acisf10941/products/lightcurves/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Thu Oct  6 02:20:12 2011] 172.831
[Thu Oct  6 02:28:31 2011] Updating aperture counts using extracted products
[Thu Oct  6 02:28:31 2011] Error reading totcts from fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src23_src.pi.gz
[Thu Oct  6 02:28:31 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 02:28:31 2011] Using photon index=1.80, rate=0.00057, arf fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src23.arf
[Thu Oct  6 02:28:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 02:28:31 2011] Updating source flux to 9.9e-15
[Thu Oct  6 02:28:40 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting