[Thu Oct  6 02:01:46 2011] Detection parameters:
  Position = (808.3, 518.3) = 20 31 40.56 41 17 10.5
  Extent = 0.8" x 0.5", rotation angle = 1 degrees
  Source counts = 31.5 +/- 5.7
  Background counts = 1.5
  Rate = 0.001 +/- 0.0002

[Thu Oct  6 02:01:50 2011] Off-axis axis estimate = 4.09'
[Thu Oct  6 02:03:43 2011] Using EEF radius (= 0.86 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 02:03:43 2011] Initial guess for spatial extent in simple fitting = 0.86"
[Thu Oct  6 02:03:43 2011] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.242
[Thu Oct  6 02:03:43 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.86"
[Thu Oct  6 02:03:45 2011] fullrun_ccd2_acisf10941_pi14-548_cl_pass0_src10.ximg exists
[Thu Oct  6 02:03:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10941_pi14-548_cl_pass0_src10.csv
[Thu Oct  6 02:03:45 2011] fullrun_ccd2_acisf10941_pi14-548_cl_pass0_src10_1.ximg exists
[Thu Oct  6 02:03:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10941_pi14-548_cl_pass0_src10.csv
[Thu Oct  6 02:03:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10941_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10941_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 02:03:50 2011] fullrun_ccd2_acisf10941_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Thu Oct  6 02:03:50 2011] fullrun_ccd2_acisf10941_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Oct  6 02:03:50 2011] Fit fullrun_ccd2_acisf10941_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Oct  6 02:04:15 2011] Spatial fit model total counts = 32.754500, observed total counts = 35.000000
[Thu Oct  6 02:04:15 2011] Offset between fit and detection position for source 10 = 0.763842 pixels
[Thu Oct  6 02:04:15 2011] 32.844690 total counts/ 1.083890 bgd. counts: snr = 30.506953
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.763842 pixels
  Position = (808.9, 518.8) = 20 31 40.56 41 17 10.5
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 31.8 +/- 5.7
  Background counts = 1.1
  Rate = 0.001 +/- 0.0002
[Thu Oct  6 02:04:15 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 02:04:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 02:04:15 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 02:04:15 2011] Source does appear to be extended
[Thu Oct  6 02:04:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 02:05:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 02:05:25 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Thu Oct  6 02:05:25 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Thu Oct  6 02:05:25 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.83"
[Thu Oct  6 02:05:26 2011] fullrun_ccd2_acisf10941_pi14-548_cl_pass1_src10.ximg exists
[Thu Oct  6 02:05:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10941_pi14-548_cl_pass1_src10.csv
[Thu Oct  6 02:05:26 2011] fullrun_ccd2_acisf10941_pi14-548_cl_pass1_src10_1.ximg exists
[Thu Oct  6 02:05:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10941_pi14-548_cl_pass1_src10.csv
[Thu Oct  6 02:05:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10941_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10941_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 02:05:26 2011] fullrun_ccd2_acisf10941_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Thu Oct  6 02:05:26 2011] fullrun_ccd2_acisf10941_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Oct  6 02:05:26 2011] Fit fullrun_ccd2_acisf10941_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Thu Oct  6 02:05:49 2011] Spatial fit model total counts = 33.189200, observed total counts = 35.000000
[Thu Oct  6 02:05:49 2011] Offset between fit and detection position for source 10 = 0.018788 pixels
[Thu Oct  6 02:05:49 2011] 33.229968 total counts/ 0.513168 bgd. counts: snr = 45.671054
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.018788 pixels
  Position = (808.9, 518.8) = 20 31 40.56 41 17 10.5
  Extent = 0.9 (0.8-1.0)", rotation angle = 0
  Source counts = 32.7 +/- 5.8
  Background counts = 0.5
  Rate = 0.001 +/- 0.0002
[Thu Oct  6 02:05:50 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 02:05:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 02:05:50 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 02:05:50 2011] Source does appear to be extended
[Thu Oct  6 02:05:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 02:14:31 2011] Not overwriting source region fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src10_src.reg
[Thu Oct  6 02:14:31 2011] Extracting stamp from image fullrun_ccd2_acisf10941_pi14-548_cl_sm2.00.img.gz, (769, 479) - (848, 558)
[Thu Oct  6 02:14:31 2011] Writing fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src10.gif
[Thu Oct  6 02:15:22 2011] ../../acisf10941/products/events/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src10_src.evt and ../../acisf10941/products/events/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Thu Oct  6 02:15:22 2011] Size of ../../acisf10941/products/events/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src10_src.evt.gz[events] = 34 counts
[Thu Oct  6 02:15:22 2011] Mean chipx,y = (500.18, 784.71)
[Thu Oct  6 02:15:22 2011] Mean tdetx,y = (3845.71, 3585.82)
[Thu Oct  6 02:15:22 2011] chipx,y range = (487.00-521.00, 763.00-802.00)
[Thu Oct  6 02:15:22 2011] Size of ../../acisf10941/products/events/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 31 counts
[Thu Oct  6 02:15:22 2011] ../../acisf10941/products/images/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src10_src.img and ../../acisf10941/products/images/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Thu Oct  6 02:15:22 2011] ../../acisf10941/products/spectra/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src10_src.pi and ../../acisf10941/products/spectra/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Thu Oct  6 02:15:22 2011] Not generating rmf since there are only 32 counts
[Thu Oct  6 02:15:33 2011] ../../acisf10941/products/lightcurves/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src10_src.lc and ../../acisf10941/products/lightcurves/fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Thu Oct  6 02:20:12 2011] 188.262
[Thu Oct  6 02:28:31 2011] Updating aperture counts using extracted products
[Thu Oct  6 02:28:31 2011] Error reading totcts from fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src10_src.pi.gz
[Thu Oct  6 02:28:31 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 02:28:31 2011] Using photon index=1.80, rate=0.0011, arf fullrun_ccd2_acisf10941_pi14-548_pass1_cl_src10.arf
[Thu Oct  6 02:28:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 02:28:31 2011] Updating source flux to 1.8e-14
[Thu Oct  6 02:28:40 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting