[Thu Sep 29 09:20:32 2011] Detection parameters:
  Position = (53.2, 125.6) = 20 31 47.59 41 6 38.2
  Extent = 0.5" x 0.5", rotation angle = 20 degrees
  Source counts = 88.9 +/- 9.5
  Background counts = 2.1
  Rate = 0.003 +/- 0.0003

[Thu Sep 29 09:20:32 2011] Off-axis axis estimate = 0.38'
[Thu Sep 29 09:22:44 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 09:22:44 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Thu Sep 29 09:22:44 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.309
[Thu Sep 29 09:22:44 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.40"
[Thu Sep 29 09:22:45 2011] fullrun_ccd3_acisf10940_pi14-548_cl_pass0_src3.ximg exists
[Thu Sep 29 09:22:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10940_pi14-548_cl_pass0_src3.csv
[Thu Sep 29 09:22:45 2011] fullrun_ccd3_acisf10940_pi14-548_cl_pass0_src3_1.ximg exists
[Thu Sep 29 09:22:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10940_pi14-548_cl_pass0_src3.csv
[Thu Sep 29 09:22:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10940_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10940_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 09:22:48 2011] fullrun_ccd3_acisf10940_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Thu Sep 29 09:22:48 2011] fullrun_ccd3_acisf10940_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Sep 29 09:22:48 2011] Fit fullrun_ccd3_acisf10940_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Sep 29 09:23:11 2011] Spatial fit model total counts = 95.003200, observed total counts = 95.000000
[Thu Sep 29 09:23:11 2011] Offset between fit and detection position for source 49 = 0.734980 pixels
[Thu Sep 29 09:23:11 2011] 95.071230 total counts/ 9.230130 bgd. counts: snr = 28.254743
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.734980 pixels
  Position = (53.7, 126.1) = 20 31 47.59 41 6 38.3
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 85.8 +/- 9.8
  Background counts = 9.2
  Rate = 0.003 +/- 0.0004
[Thu Sep 29 09:23:12 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 09:23:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 09:23:12 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 09:23:12 2011] Source does appear to be extended
[Thu Sep 29 09:23:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 09:23:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 09:23:45 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Sep 29 09:23:45 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.928
[Thu Sep 29 09:23:45 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.38"
[Thu Sep 29 09:23:46 2011] fullrun_ccd3_acisf10940_pi14-548_cl_pass1_src3.ximg exists
[Thu Sep 29 09:23:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10940_pi14-548_cl_pass1_src3.csv
[Thu Sep 29 09:23:46 2011] fullrun_ccd3_acisf10940_pi14-548_cl_pass1_src3_1.ximg exists
[Thu Sep 29 09:23:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10940_pi14-548_cl_pass1_src3.csv
[Thu Sep 29 09:23:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10940_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10940_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 09:23:46 2011] fullrun_ccd3_acisf10940_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Thu Sep 29 09:23:46 2011] fullrun_ccd3_acisf10940_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Sep 29 09:23:46 2011] Fit fullrun_ccd3_acisf10940_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Sep 29 09:24:12 2011] Spatial fit model total counts = 94.898800, observed total counts = 95.000000
[Thu Sep 29 09:24:12 2011] Offset between fit and detection position for source 49 = 0.000275 pixels
[Thu Sep 29 09:24:12 2011] 95.110070 total counts/ 9.196370 bgd. counts: snr = 28.330498
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.000275 pixels
  Position = (53.7, 126.1) = 20 31 47.59 41 6 38.3
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 85.9 +/- 9.8
  Background counts = 9.2
  Rate = 0.003 +/- 0.0004
[Thu Sep 29 09:24:12 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 09:24:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 09:24:12 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 09:24:12 2011] Source does appear to be extended
[Thu Sep 29 09:24:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 09:31:25 2011] Not overwriting source region fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src49_src.reg
[Thu Sep 29 09:31:25 2011] Extracting stamp from image fullrun_ccd3_acisf10940_pi14-548_cl_sm2.00.img.gz, (36, 109) - (71, 144)
[Thu Sep 29 09:31:25 2011] Writing fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src49.gif
[Thu Sep 29 09:31:33 2011] ../../acisf10940/products/events/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src49_src.evt and ../../acisf10940/products/events/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src49_bgd.evt exist, delete to re-create
[Thu Sep 29 09:31:33 2011] Size of ../../acisf10940/products/events/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src49_src.evt.gz[events] = 87 counts
[Thu Sep 29 09:31:33 2011] Mean chipx,y = (928.61, 982.02)
[Thu Sep 29 09:31:33 2011] Mean tdetx,y = (4149.98, 3989.61)
[Thu Sep 29 09:31:33 2011] chipx,y range = (910.00-946.00, 967.00-1002.00)
[Thu Sep 29 09:31:33 2011] Size of ../../acisf10940/products/events/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src49_bgd.evt.gz[events] = 6 counts
[Thu Sep 29 09:31:33 2011] ../../acisf10940/products/images/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src49_src.img and ../../acisf10940/products/images/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src49_bgd.img exist, delete to re-create
[Thu Sep 29 09:31:33 2011] ../../acisf10940/products/spectra/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src49_src.pi and ../../acisf10940/products/spectra/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src49_bgd.pi exist, delete to re-create
[Thu Sep 29 09:31:33 2011] Not generating rmf since there are only 85 counts
[Thu Sep 29 09:31:36 2011] ../../acisf10940/products/lightcurves/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src49_src.lc and ../../acisf10940/products/lightcurves/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src49_bgd.lc exist, delete to re-create
[Thu Sep 29 09:33:59 2011] 201.591
[Thu Sep 29 09:34:34 2011] Updating aperture counts using extracted products
[Thu Sep 29 09:34:34 2011] Error reading totcts from fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src49_src.pi.gz
[Thu Sep 29 09:34:36 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 09:34:36 2011] Using photon index=1.80, rate=0.0031, arf fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src49.arf
[Thu Sep 29 09:34:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 09:34:36 2011] Updating source flux to 4.8e-14
[Thu Sep 29 09:35:12 2011] Source 49 has fewer than 100.000000 counts, skipping spectral fitting