[Thu Sep 29 09:20:29 2011] Detection parameters:
  Position = (505.3, 428.7) = 20 31 27.89 41 9 7.3
  Extent = 0.6" x 0.5", rotation angle = 149 degrees
  Source counts = 60.6 +/- 7.9
  Background counts = 2.4
  Rate = 0.002 +/- 0.0003

[Thu Sep 29 09:20:32 2011] Off-axis axis estimate = 4.84'
[Thu Sep 29 09:22:44 2011] Using EEF radius (= 1.12 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 09:22:44 2011] Initial guess for spatial extent in simple fitting = 1.12"
[Thu Sep 29 09:22:44 2011] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.814
[Thu Sep 29 09:22:44 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 1.12"
[Thu Sep 29 09:22:45 2011] fullrun_ccd3_acisf10940_pi14-548_cl_pass0_src5.ximg exists
[Thu Sep 29 09:22:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10940_pi14-548_cl_pass0_src5.csv
[Thu Sep 29 09:22:45 2011] fullrun_ccd3_acisf10940_pi14-548_cl_pass0_src5_1.ximg exists
[Thu Sep 29 09:22:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10940_pi14-548_cl_pass0_src5.csv
[Thu Sep 29 09:22:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10940_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10940_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 09:22:48 2011] fullrun_ccd3_acisf10940_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Thu Sep 29 09:22:48 2011] fullrun_ccd3_acisf10940_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Sep 29 09:22:48 2011] Fit fullrun_ccd3_acisf10940_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Sep 29 09:23:11 2011] Spatial fit model total counts = 67.904300, observed total counts = 68.000000
[Thu Sep 29 09:23:11 2011] Offset between fit and detection position for source 19 = 1.014438 pixels
[Thu Sep 29 09:23:11 2011] 69.148500 total counts/ 18.668000 bgd. counts: snr = 11.683548
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 1.014438 pixels
  Position = (505.2, 429.7) = 20 31 27.92 41 9 7.5
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 50.5 +/- 8.3
  Background counts = 18.7
  Rate = 0.002 +/- 0.0003
[Thu Sep 29 09:23:12 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 09:23:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 09:23:12 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 09:23:12 2011] Source does appear to be extended
[Thu Sep 29 09:23:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 09:23:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 09:23:45 2011] Initial guess for spatial extent in simple fitting = 0.89"
[Thu Sep 29 09:23:45 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.166
[Thu Sep 29 09:23:45 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.89"
[Thu Sep 29 09:23:46 2011] fullrun_ccd3_acisf10940_pi14-548_cl_pass1_src5.ximg exists
[Thu Sep 29 09:23:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10940_pi14-548_cl_pass1_src5.csv
[Thu Sep 29 09:23:46 2011] fullrun_ccd3_acisf10940_pi14-548_cl_pass1_src5_1.ximg exists
[Thu Sep 29 09:23:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10940_pi14-548_cl_pass1_src5.csv
[Thu Sep 29 09:23:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10940_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10940_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 09:23:46 2011] fullrun_ccd3_acisf10940_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu Sep 29 09:23:46 2011] fullrun_ccd3_acisf10940_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Sep 29 09:23:46 2011] Fit fullrun_ccd3_acisf10940_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Sep 29 09:24:12 2011] Spatial fit model total counts = 68.372800, observed total counts = 67.000000
[Thu Sep 29 09:24:12 2011] Offset between fit and detection position for source 19 = 0.113491 pixels
[Thu Sep 29 09:24:12 2011] 67.052700 total counts/ 14.203900 bgd. counts: snr = 14.022690
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.113491 pixels
  Position = (505.2, 429.8) = 20 31 27.92 41 9 7.6
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 52.8 +/- 8.2
  Background counts = 14.2
  Rate = 0.002 +/- 0.0003
[Thu Sep 29 09:24:12 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 09:24:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 09:24:12 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 09:24:12 2011] Source does appear to be extended
[Thu Sep 29 09:24:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 09:31:25 2011] Not overwriting source region fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src19_src.reg
[Thu Sep 29 09:31:25 2011] Extracting stamp from image fullrun_ccd3_acisf10940_pi14-548_cl_sm2.00.img.gz, (464, 388) - (547, 471)
[Thu Sep 29 09:31:25 2011] Writing fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src19.gif
[Thu Sep 29 09:31:39 2011] ../../acisf10940/products/events/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src19_src.evt and ../../acisf10940/products/events/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Thu Sep 29 09:31:39 2011] Size of ../../acisf10940/products/events/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src19_src.evt.gz[events] = 63 counts
[Thu Sep 29 09:31:39 2011] Mean chipx,y = (615.68, 534.63)
[Thu Sep 29 09:31:39 2011] Mean tdetx,y = (4597.37, 3676.68)
[Thu Sep 29 09:31:39 2011] chipx,y range = (595.00-634.00, 517.00-555.00)
[Thu Sep 29 09:31:39 2011] Size of ../../acisf10940/products/events/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 25 counts
[Thu Sep 29 09:31:39 2011] ../../acisf10940/products/images/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src19_src.img and ../../acisf10940/products/images/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Thu Sep 29 09:31:39 2011] ../../acisf10940/products/spectra/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src19_src.pi and ../../acisf10940/products/spectra/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src19_bgd.pi exist, delete to re-create
[Thu Sep 29 09:31:39 2011] Not generating rmf since there are only 52 counts
[Thu Sep 29 09:31:42 2011] ../../acisf10940/products/lightcurves/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src19_src.lc and ../../acisf10940/products/lightcurves/fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Thu Sep 29 09:33:59 2011] 186.769
[Thu Sep 29 09:34:34 2011] Updating aperture counts using extracted products
[Thu Sep 29 09:34:34 2011] Error reading totcts from fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src19_src.pi.gz
[Thu Sep 29 09:34:36 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 09:34:36 2011] Using photon index=1.80, rate=0.00191, arf fullrun_ccd3_acisf10940_pi14-548_pass1_cl_src19.arf
[Thu Sep 29 09:34:36 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 09:34:36 2011] Updating source flux to 3.1e-14
[Thu Sep 29 09:35:12 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting