[Thu Sep 29 09:20:18 2011] Detection parameters:
  Position = (129.8, 246.0) = 20 31 45.22 40 59 4.4
  Extent = 1.1" x 0.8", rotation angle = 75 degrees
  Source counts = 77.0 +/- 9.8
  Background counts = 20.0
  Rate = 0.003 +/- 0.0004

[Thu Sep 29 09:20:21 2011] Off-axis axis estimate = 7.45'
[Thu Sep 29 09:22:36 2011] Using EEF radius (= 2.46 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 09:22:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 09:22:36 2011] Initial guess for spatial extent in simple fitting = 2.46"
[Thu Sep 29 09:22:36 2011] source mask rpix=5.0, npix_max = 120, mask sum = 121, frac = 1.001
[Thu Sep 29 09:22:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.46"
[Thu Sep 29 09:22:37 2011] fullrun_ccd1_acisf10940_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 29 09:22:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10940_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 09:22:37 2011] fullrun_ccd1_acisf10940_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 29 09:22:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10940_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 09:22:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10940_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10940_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 09:22:38 2011] fullrun_ccd1_acisf10940_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 29 09:22:38 2011] fullrun_ccd1_acisf10940_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 29 09:22:38 2011] Fit fullrun_ccd1_acisf10940_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 29 09:23:04 2011] Spatial fit model total counts = 124.912000, observed total counts = 125.000000
[Thu Sep 29 09:23:04 2011] Offset between fit and detection position for source 2 = 0.866340 pixels
[Thu Sep 29 09:23:04 2011] 125.676300 total counts/ 57.008500 bgd. counts: snr = 9.094594
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.866340 pixels
  Position = (130.6, 246.3) = 20 31 45.21 40 59 4.3
  Extent = 1.9 (1.5-2.5)", rotation angle = 0
  Source counts = 68.7 +/- 11.2
  Background counts = 57.0
  Rate = 0.002 +/- 0.0004
[Thu Sep 29 09:23:04 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 09:23:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 09:23:04 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 09:23:04 2011] Source does appear to be extended
[Thu Sep 29 09:23:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 09:23:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 09:23:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 09:23:39 2011] Initial guess for spatial extent in simple fitting = 1.89"
[Thu Sep 29 09:23:39 2011] source mask rpix=3.8, npix_max = 75, mask sum = 81, frac = 1.079
[Thu Sep 29 09:23:39 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.89"
[Thu Sep 29 09:23:40 2011] fullrun_ccd1_acisf10940_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 29 09:23:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10940_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 09:23:40 2011] fullrun_ccd1_acisf10940_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 29 09:23:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10940_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 09:23:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10940_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10940_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 09:23:40 2011] fullrun_ccd1_acisf10940_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 29 09:23:40 2011] fullrun_ccd1_acisf10940_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 29 09:23:40 2011] Fit fullrun_ccd1_acisf10940_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 29 09:24:05 2011] Spatial fit model total counts = 106.981000, observed total counts = 107.000000
[Thu Sep 29 09:24:05 2011] Offset between fit and detection position for source 2 = 0.324760 pixels
[Thu Sep 29 09:24:05 2011] 107.621600 total counts/ 45.758300 bgd. counts: snr = 9.145304
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.324760 pixels
  Position = (130.3, 246.2) = 20 31 45.22 40 59 4.2
  Extent = 1.7 (1.0-1.8)", rotation angle = 0
  Source counts = 61.9 +/- 10.4
  Background counts = 45.8
  Rate = 0.002 +/- 0.0004
[Thu Sep 29 09:24:05 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 09:24:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 09:24:05 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 09:24:05 2011] Source does appear to be extended
[Thu Sep 29 09:24:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 09:26:18 2011] Not overwriting source region fullrun_ccd1_acisf10940_pi14-548_pass1_cl_src2_src.reg
[Thu Sep 29 09:26:18 2011] Extracting stamp from image fullrun_ccd1_acisf10940_pi14-548_cl_sm2.00.img.gz, (52, 168) - (208, 324)
[Thu Sep 29 09:26:18 2011] Writing fullrun_ccd1_acisf10940_pi14-548_pass1_cl_src2.gif
[Thu Sep 29 09:26:19 2011] ../../acisf10940/products/events/fullrun_ccd1_acisf10940_pi14-548_pass1_cl_src2_src.evt and ../../acisf10940/products/events/fullrun_ccd1_acisf10940_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu Sep 29 09:26:19 2011] Size of ../../acisf10940/products/events/fullrun_ccd1_acisf10940_pi14-548_pass1_cl_src2_src.evt.gz[events] = 94 counts
[Thu Sep 29 09:26:19 2011] Mean chipx,y = (803.61, 911.28)
[Thu Sep 29 09:26:19 2011] Mean tdetx,y = (4220.72, 4910.61)
[Thu Sep 29 09:26:19 2011] chipx,y range = (779.00-834.00, 891.00-938.00)
[Thu Sep 29 09:26:19 2011] Size of ../../acisf10940/products/events/fullrun_ccd1_acisf10940_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 208 counts
[Thu Sep 29 09:26:19 2011] ../../acisf10940/products/images/fullrun_ccd1_acisf10940_pi14-548_pass1_cl_src2_src.img and ../../acisf10940/products/images/fullrun_ccd1_acisf10940_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu Sep 29 09:26:19 2011] ../../acisf10940/products/spectra/fullrun_ccd1_acisf10940_pi14-548_pass1_cl_src2_src.pi and ../../acisf10940/products/spectra/fullrun_ccd1_acisf10940_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Thu Sep 29 09:26:19 2011] Not generating rmf since there are only 61 counts
[Thu Sep 29 09:26:23 2011] ../../acisf10940/products/lightcurves/fullrun_ccd1_acisf10940_pi14-548_pass1_cl_src2_src.lc and ../../acisf10940/products/lightcurves/fullrun_ccd1_acisf10940_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu Sep 29 09:27:47 2011] 176.26
[Thu Sep 29 09:34:33 2011] Updating aperture counts using extracted products
[Thu Sep 29 09:34:33 2011] Error reading totcts from fullrun_ccd1_acisf10940_pi14-548_pass1_cl_src2_src.pi.gz
[Thu Sep 29 09:34:33 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 09:34:33 2011] Using photon index=1.80, rate=0.0022, arf fullrun_ccd1_acisf10940_pi14-548_pass1_cl_src2.arf
[Thu Sep 29 09:34:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 09:34:33 2011] Updating source flux to 3.8e-14
[Thu Sep 29 09:34:58 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Sep 29 09:34:59 2011] acisf10940/analysis//spectral/fullrun_ccd1_acisf10940_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete