[Sun Oct  2 09:29:55 2011] Detection parameters:
  Position = (199.7, 268.8) = 20 32 0.79 41 0 47.6
  Extent = 0.5" x 0.5", rotation angle = 92 degrees
  Source counts = 23.9 +/- 5.1
  Background counts = 2.1
  Rate = 0.001 +/- 0.0002

[Sun Oct  2 09:29:57 2011] Off-axis axis estimate = 2.10'
[Sun Oct  2 09:32:21 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 09:32:21 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Sun Oct  2 09:32:21 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.155
[Sun Oct  2 09:32:21 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.44"
[Sun Oct  2 09:32:21 2011] fullrun_ccd3_acisf10939_pi14-548_cl_pass0_src11.ximg exists
[Sun Oct  2 09:32:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10939_pi14-548_cl_pass0_src11.csv
[Sun Oct  2 09:32:21 2011] fullrun_ccd3_acisf10939_pi14-548_cl_pass0_src11_1.ximg exists
[Sun Oct  2 09:32:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10939_pi14-548_cl_pass0_src11.csv
[Sun Oct  2 09:32:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10939_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10939_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 09:32:23 2011] fullrun_ccd3_acisf10939_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sun Oct  2 09:32:25 2011] fullrun_ccd3_acisf10939_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Oct  2 09:32:25 2011] Fit fullrun_ccd3_acisf10939_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Oct  2 09:32:58 2011] Spatial fit model total counts = 33.824800, observed total counts = 34.000000
[Sun Oct  2 09:32:58 2011] Offset between fit and detection position for source 9 = 0.653033 pixels
[Sun Oct  2 09:32:58 2011] 34.235130 total counts/ 9.075030 bgd. counts: snr = 8.351959
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.653033 pixels
  Position = (200.0, 269.3) = 20 32 0.80 41 0 47.6
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 25.2 +/- 5.9
  Background counts = 9.1
  Rate = 0.001 +/- 0.0002
[Sun Oct  2 09:32:58 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 09:32:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 09:32:58 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 09:32:58 2011] Source does appear to be extended
[Sun Oct  2 09:32:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 09:33:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 09:33:44 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Sun Oct  2 09:33:44 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.183
[Sun Oct  2 09:33:44 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.54"
[Sun Oct  2 09:33:47 2011] fullrun_ccd3_acisf10939_pi14-548_cl_pass1_src11.ximg exists
[Sun Oct  2 09:33:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10939_pi14-548_cl_pass1_src11.csv
[Sun Oct  2 09:33:48 2011] fullrun_ccd3_acisf10939_pi14-548_cl_pass1_src11_1.ximg exists
[Sun Oct  2 09:33:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10939_pi14-548_cl_pass1_src11.csv
[Sun Oct  2 09:33:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10939_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10939_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 09:33:53 2011] fullrun_ccd3_acisf10939_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sun Oct  2 09:33:54 2011] fullrun_ccd3_acisf10939_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Oct  2 09:33:54 2011] Fit fullrun_ccd3_acisf10939_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Oct  2 09:34:29 2011] Spatial fit model total counts = 33.853600, observed total counts = 34.000000
[Sun Oct  2 09:34:29 2011] Offset between fit and detection position for source 9 = 0.016336 pixels
[Sun Oct  2 09:34:29 2011] 34.260980 total counts/ 8.986080 bgd. counts: snr = 8.431490
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.016336 pixels
  Position = (200.0, 269.3) = 20 32 0.80 41 0 47.6
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 25.3 +/- 5.9
  Background counts = 9.0
  Rate = 0.001 +/- 0.0002
[Sun Oct  2 09:34:29 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 09:34:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 09:34:29 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 09:34:29 2011] Source does appear to be extended
[Sun Oct  2 09:34:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 09:48:21 2011] Not overwriting source region fullrun_ccd3_acisf10939_pi14-548_pass1_cl_src9_src.reg
[Sun Oct  2 09:48:21 2011] Extracting stamp from image fullrun_ccd3_acisf10939_pi14-548_cl_sm2.00.img.gz, (175, 244) - (225, 294)
[Sun Oct  2 09:48:21 2011] Writing fullrun_ccd3_acisf10939_pi14-548_pass1_cl_src9.gif
[Sun Oct  2 09:48:56 2011] ../../acisf10939/products/events/fullrun_ccd3_acisf10939_pi14-548_pass1_cl_src9_src.evt and ../../acisf10939/products/events/fullrun_ccd3_acisf10939_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sun Oct  2 09:48:56 2011] Size of ../../acisf10939/products/events/fullrun_ccd3_acisf10939_pi14-548_pass1_cl_src9_src.evt.gz[events] = 28 counts
[Sun Oct  2 09:48:56 2011] Mean chipx,y = (770.86, 839.50)
[Sun Oct  2 09:48:56 2011] Mean tdetx,y = (4292.50, 3831.86)
[Sun Oct  2 09:48:56 2011] chipx,y range = (754.00-788.00, 824.00-857.00)
[Sun Oct  2 09:48:56 2011] Size of ../../acisf10939/products/events/fullrun_ccd3_acisf10939_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 30 counts
[Sun Oct  2 09:48:56 2011] ../../acisf10939/products/images/fullrun_ccd3_acisf10939_pi14-548_pass1_cl_src9_src.img and ../../acisf10939/products/images/fullrun_ccd3_acisf10939_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Sun Oct  2 09:48:56 2011] ../../acisf10939/products/spectra/fullrun_ccd3_acisf10939_pi14-548_pass1_cl_src9_src.pi and ../../acisf10939/products/spectra/fullrun_ccd3_acisf10939_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sun Oct  2 09:48:56 2011] Not generating rmf since there are only 25 counts
[Sun Oct  2 09:48:58 2011] ../../acisf10939/products/lightcurves/fullrun_ccd3_acisf10939_pi14-548_pass1_cl_src9_src.lc and ../../acisf10939/products/lightcurves/fullrun_ccd3_acisf10939_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sun Oct  2 09:49:50 2011] 191.861
[Sun Oct  2 09:50:28 2011] Updating aperture counts using extracted products
[Sun Oct  2 09:50:28 2011] Error reading totcts from fullrun_ccd3_acisf10939_pi14-548_pass1_cl_src9_src.pi.gz
[Sun Oct  2 09:50:29 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 09:50:29 2011] Using photon index=1.80, rate=0.00105, arf fullrun_ccd3_acisf10939_pi14-548_pass1_cl_src9.arf
[Sun Oct  2 09:50:29 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 09:50:29 2011] Updating source flux to 1.7e-14
[Sun Oct  2 09:59:21 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting