[Sun Oct  2 09:29:50 2011] Detection parameters:
  Position = (477.1, 1008.2) = 20 32 34.02 41 6 49.8
  Extent = 4.6" x 2.0", rotation angle = 18 degrees
  Source counts = 179.9 +/- 15.1
  Background counts = 47.1
  Rate = 0.007 +/- 0.0006

[Sun Oct  2 09:29:53 2011] Off-axis axis estimate = 8.85'
[Sun Oct  2 09:32:18 2011] Using EEF radius (= 3.46 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 09:32:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct  2 09:32:18 2011] Initial guess for spatial extent in simple fitting = 3.46"
[Sun Oct  2 09:32:18 2011] source mask rpix=7.0, npix_max = 227, mask sum = 225, frac = 0.991
[Sun Oct  2 09:32:18 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.46"
[Sun Oct  2 09:32:18 2011] fullrun_ccd2_acisf10939_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct  2 09:32:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10939_pi14-548_cl_pass0_src1.csv
[Sun Oct  2 09:32:18 2011] fullrun_ccd2_acisf10939_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct  2 09:32:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10939_pi14-548_cl_pass0_src1.csv
[Sun Oct  2 09:32:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10939_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10939_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 09:32:19 2011] fullrun_ccd2_acisf10939_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct  2 09:32:20 2011] fullrun_ccd2_acisf10939_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct  2 09:32:20 2011] Fit fullrun_ccd2_acisf10939_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct  2 09:32:55 2011] Spatial fit model total counts = 241.398000, observed total counts = 240.000000
[Sun Oct  2 09:32:55 2011] Offset between fit and detection position for source 2 = 0.784653 pixels
[Sun Oct  2 09:32:55 2011] 240.617400 total counts/ 74.254400 bgd. counts: snr = 19.306149
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.784653 pixels
  Position = (477.3, 1009.0) = 20 32 34.03 41 6 49.9
  Extent = 2.9 (2.4-3.3)", rotation angle = 0
  Source counts = 166.4 +/- 15.5
  Background counts = 74.3
  Rate = 0.007 +/- 0.0006
[Sun Oct  2 09:32:55 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 09:32:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 09:32:55 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 09:32:55 2011] Source does appear to be extended
[Sun Oct  2 09:32:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 09:33:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 09:33:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct  2 09:33:43 2011] Initial guess for spatial extent in simple fitting = 2.86"
[Sun Oct  2 09:33:43 2011] source mask rpix=5.8, npix_max = 159, mask sum = 156, frac = 0.978
[Sun Oct  2 09:33:43 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.86"
[Sun Oct  2 09:33:44 2011] fullrun_ccd2_acisf10939_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct  2 09:33:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10939_pi14-548_cl_pass1_src1.csv
[Sun Oct  2 09:33:44 2011] fullrun_ccd2_acisf10939_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct  2 09:33:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10939_pi14-548_cl_pass1_src1.csv
[Sun Oct  2 09:33:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10939_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10939_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 09:33:44 2011] fullrun_ccd2_acisf10939_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct  2 09:33:44 2011] fullrun_ccd2_acisf10939_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct  2 09:33:44 2011] Fit fullrun_ccd2_acisf10939_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct  2 09:34:27 2011] Spatial fit model total counts = 221.206000, observed total counts = 220.000000
[Sun Oct  2 09:34:27 2011] Offset between fit and detection position for source 2 = 0.127466 pixels
[Sun Oct  2 09:34:27 2011] 221.047400 total counts/ 61.186400 bgd. counts: snr = 20.436903
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.127466 pixels
  Position = (477.3, 1008.8) = 20 32 34.04 41 6 49.8
  Extent = 2.7 (2.3-3.2)", rotation angle = 0
  Source counts = 159.9 +/- 14.9
  Background counts = 61.2
  Rate = 0.007 +/- 0.0006
[Sun Oct  2 09:34:27 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 09:34:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 09:34:27 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 09:34:27 2011] Source does appear to be extended
[Sun Oct  2 09:34:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 09:47:29 2011] Not overwriting source region fullrun_ccd2_acisf10939_pi14-548_pass1_cl_src2_src.reg
[Sun Oct  2 09:47:29 2011] Extracting stamp from image fullrun_ccd2_acisf10939_pi14-548_cl_sm2.00.img.gz, (352, 884) - (602, 1055)
[Sun Oct  2 09:47:29 2011] Writing fullrun_ccd2_acisf10939_pi14-548_pass1_cl_src2.gif
[Sun Oct  2 09:47:30 2011] ../../acisf10939/products/events/fullrun_ccd2_acisf10939_pi14-548_pass1_cl_src2_src.evt and ../../acisf10939/products/events/fullrun_ccd2_acisf10939_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sun Oct  2 09:47:30 2011] Size of ../../acisf10939/products/events/fullrun_ccd2_acisf10939_pi14-548_pass1_cl_src2_src.evt.gz[events] = 210 counts
[Sun Oct  2 09:47:30 2011] Mean chipx,y = (992.34, 464.15)
[Sun Oct  2 09:47:30 2011] Mean tdetx,y = (3525.15, 3093.66)
[Sun Oct  2 09:47:30 2011] chipx,y range = (959.00-1022.00, 433.00-495.00)
[Sun Oct  2 09:47:30 2011] Size of ../../acisf10939/products/events/fullrun_ccd2_acisf10939_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 216 counts
[Sun Oct  2 09:47:30 2011] ../../acisf10939/products/images/fullrun_ccd2_acisf10939_pi14-548_pass1_cl_src2_src.img and ../../acisf10939/products/images/fullrun_ccd2_acisf10939_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sun Oct  2 09:47:30 2011] ../../acisf10939/products/spectra/fullrun_ccd2_acisf10939_pi14-548_pass1_cl_src2_src.pi and ../../acisf10939/products/spectra/fullrun_ccd2_acisf10939_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sun Oct  2 09:47:33 2011] ../../acisf10939/products/lightcurves/fullrun_ccd2_acisf10939_pi14-548_pass1_cl_src2_src.lc and ../../acisf10939/products/lightcurves/fullrun_ccd2_acisf10939_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sun Oct  2 09:48:20 2011] Keeping rmf generated by specextract
[Sun Oct  2 09:48:21 2011] 157.228
[Sun Oct  2 09:50:28 2011] Updating aperture counts using extracted products
[Sun Oct  2 09:50:28 2011] Error reading totcts from fullrun_ccd2_acisf10939_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Oct  2 09:50:28 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 09:50:28 2011] Using photon index=1.80, rate=0.00664, arf fullrun_ccd2_acisf10939_pi14-548_pass1_cl_src2.arf
[Sun Oct  2 09:50:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 09:50:28 2011] Updating source flux to 1.2e-13
[Sun Oct  2 09:59:21 2011] Reading fit data from acisf10939/analysis//spectral/fullrun_ccd2_acisf10939_pi14-548_pass1_cl_src2_pl.csv
[Sun Oct  2 09:59:21 2011] Spectral fit parameter nH value = 2.01953e+22
[Sun Oct  2 09:59:21 2011] Spectral fit parameter PhoIndex value = 2.0451
[Sun Oct  2 09:59:21 2011] Failed to get F(0.3-8.0) from acisf10939/analysis//spectral/fullrun_ccd2_acisf10939_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Oct  2 09:59:21 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 09:59:21 2011] Using Nh = 2e+22, photon index=2.05, rate=0.00664, arf fullrun_ccd2_acisf10939_pi14-548_pass1_cl_src2.arf
[Sun Oct  2 09:59:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 09:59:21 2011] Updating source flux to 1.3e-13