[Sun Oct  2 09:29:42 2011] Detection parameters:
  Position = (969.5, 903.9) = 20 32 12.54 40 57 28.4
  Extent = 0.5" x 0.5", rotation angle = 0 degrees
  Source counts = 190.4 +/- 15.0
  Background counts = 35.6
  Rate = 0.008 +/- 0.0006

[Sun Oct  2 09:29:48 2011] Off-axis axis estimate = 2.00'
[Sun Oct  2 09:32:07 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 09:32:07 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Sun Oct  2 09:32:07 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.795
[Sun Oct  2 09:32:07 2011] Giving source the simple spatial ID 86 for pass 0, mean size = 0.43"
[Sun Oct  2 09:32:12 2011] fullrun_ccd0_acisf10939_pi14-548_cl_pass0_src86.ximg exists
[Sun Oct  2 09:32:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10939_pi14-548_cl_pass0_src86.csv
[Sun Oct  2 09:32:12 2011] fullrun_ccd0_acisf10939_pi14-548_cl_pass0_src86_1.ximg exists
[Sun Oct  2 09:32:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10939_pi14-548_cl_pass0_src86.csv
[Sun Oct  2 09:32:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10939_pi14-548_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10939_pi14-548_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 09:32:15 2011] fullrun_ccd0_acisf10939_pi14-548_cl_pass0_tfrozen_src86.ximg exists
[Sun Oct  2 09:32:15 2011] fullrun_ccd0_acisf10939_pi14-548_cl_pass0_tfrozen_src86_1.ximg exists
[Sun Oct  2 09:32:15 2011] Fit fullrun_ccd0_acisf10939_pi14-548_cl_pass0_tfrozen_src86 appears to have run properly
[Sun Oct  2 09:32:50 2011] Spatial fit model total counts = 547.512000, observed total counts = 547.000000
[Sun Oct  2 09:32:50 2011] Offset between fit and detection position for source 86 = 2.621254 pixels
[Sun Oct  2 09:32:50 2011] 479.092000 total counts/ 150.270000 bgd. counts: snr = 26.824073
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 2.621254 pixels
  Position = (966.9, 904.4) = 20 32 12.67 40 57 28.4
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 328.8 +/- 21.9
  Background counts = 150.3
  Rate = 0.01 +/- 0.0009
[Sun Oct  2 09:32:50 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 09:32:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 09:32:50 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 09:32:50 2011] Source does appear to be extended
[Sun Oct  2 09:32:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 09:32:50 2011] Source is confused with source 67
[Sun Oct  2 09:33:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 09:33:31 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Sun Oct  2 09:33:31 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Sun Oct  2 09:33:31 2011] Giving source the simple spatial ID 86 for pass 1, mean size = 1.50"
[Sun Oct  2 09:33:35 2011] fullrun_ccd0_acisf10939_pi14-548_cl_pass1_src86.ximg exists
[Sun Oct  2 09:33:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10939_pi14-548_cl_pass1_src86.csv
[Sun Oct  2 09:33:35 2011] fullrun_ccd0_acisf10939_pi14-548_cl_pass1_src86_1.ximg exists
[Sun Oct  2 09:33:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10939_pi14-548_cl_pass1_src86.csv
[Sun Oct  2 09:33:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10939_pi14-548_cl_pass1_src86_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10939_pi14-548_cl_pass1_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 09:33:39 2011] fullrun_ccd0_acisf10939_pi14-548_cl_pass1_tfrozen_src86.ximg exists
[Sun Oct  2 09:33:39 2011] fullrun_ccd0_acisf10939_pi14-548_cl_pass1_tfrozen_src86_1.ximg exists
[Sun Oct  2 09:33:39 2011] Fit fullrun_ccd0_acisf10939_pi14-548_cl_pass1_tfrozen_src86 appears to have run properly
[Sun Oct  2 09:34:22 2011] Spatial fit model total counts = 650.474000, observed total counts = 650.000000
[Sun Oct  2 09:34:22 2011] Offset between fit and detection position for source 86 = 2.320593 pixels
[Sun Oct  2 09:34:22 2011] 292.549300 total counts/ 73.953300 bgd. counts: snr = 25.419291
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 2.320593 pixels
  Position = (969.2, 904.2) = 20 32 12.57 40 57 28.3
  Extent = 1.2 (1.0-1.4)", rotation angle = 0
  Source counts = 218.6 +/- 17.1
  Background counts = 74.0
  Rate = 0.009 +/- 0.0007
[Sun Oct  2 09:34:22 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 09:34:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 09:34:22 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 09:34:22 2011] Source does appear to be extended
[Sun Oct  2 09:34:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 09:35:02 2011] Not overwriting source region fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src86_src.reg
[Sun Oct  2 09:35:02 2011] Extracting stamp from image fullrun_ccd0_acisf10939_pi14-548_cl_sm2.00.img.gz, (917, 851) - (1022, 957)
[Sun Oct  2 09:35:02 2011] Writing fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src86.gif
[Sun Oct  2 09:44:40 2011] ../../acisf10939/products/events/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src86_src.evt and ../../acisf10939/products/events/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src86_bgd.evt exist, delete to re-create
[Sun Oct  2 09:44:40 2011] Size of ../../acisf10939/products/events/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src86_src.evt.gz[events] = 596 counts
[Sun Oct  2 09:44:40 2011] Mean chipx,y = (894.94, 957.80)
[Sun Oct  2 09:44:40 2011] Mean tdetx,y = (4018.80, 4237.06)
[Sun Oct  2 09:44:40 2011] chipx,y range = (869.00-919.00, 933.00-983.00)
[Sun Oct  2 09:44:40 2011] Size of ../../acisf10939/products/events/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src86_bgd.evt.gz[events] = 660 counts
[Sun Oct  2 09:44:40 2011] ../../acisf10939/products/images/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src86_src.img and ../../acisf10939/products/images/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src86_bgd.img exist, delete to re-create
[Sun Oct  2 09:44:40 2011] ../../acisf10939/products/spectra/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src86_src.pi and ../../acisf10939/products/spectra/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src86_bgd.pi exist, delete to re-create
[Sun Oct  2 09:44:44 2011] ../../acisf10939/products/lightcurves/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src86_src.lc and ../../acisf10939/products/lightcurves/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src86_bgd.lc exist, delete to re-create
[Sun Oct  2 09:46:07 2011] Keeping rmf generated by specextract
[Sun Oct  2 09:46:07 2011] 201.708
[Sun Oct  2 09:50:25 2011] Updating aperture counts using extracted products
[Sun Oct  2 09:50:25 2011] Error reading totcts from fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src86_src.pi.gz
[Sun Oct  2 09:50:27 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 09:50:27 2011] Using photon index=1.80, rate=0.00908, arf fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src86.arf
[Sun Oct  2 09:50:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 09:50:27 2011] Updating source flux to 1.4e-13
[Sun Oct  2 09:50:35 2011] Flag c found in src. 86 procflags, skipping spectral fitting