[Sun Oct  2 09:29:37 2011] Detection parameters:
  Position = (401.4, 902.4) = 20 32 37.21 40 57 27.4
  Extent = 0.8" x 0.7", rotation angle = 82 degrees
  Source counts = 195.0 +/- 15.5
  Background counts = 44.0
  Rate = 0.008 +/- 0.0006

[Sun Oct  2 09:29:48 2011] Off-axis axis estimate = 5.67'
[Sun Oct  2 09:32:07 2011] Using EEF radius (= 1.47 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 09:32:07 2011] Initial guess for spatial extent in simple fitting = 1.47"
[Sun Oct  2 09:32:07 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.007
[Sun Oct  2 09:32:07 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 1.47"
[Sun Oct  2 09:32:11 2011] fullrun_ccd0_acisf10939_pi14-548_cl_pass0_src25.ximg exists
[Sun Oct  2 09:32:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10939_pi14-548_cl_pass0_src25.csv
[Sun Oct  2 09:32:11 2011] fullrun_ccd0_acisf10939_pi14-548_cl_pass0_src25_1.ximg exists
[Sun Oct  2 09:32:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10939_pi14-548_cl_pass0_src25.csv
[Sun Oct  2 09:32:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10939_pi14-548_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10939_pi14-548_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 09:32:13 2011] fullrun_ccd0_acisf10939_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Sun Oct  2 09:32:13 2011] fullrun_ccd0_acisf10939_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Oct  2 09:32:13 2011] Fit fullrun_ccd0_acisf10939_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Oct  2 09:32:50 2011] Spatial fit model total counts = 930.648000, observed total counts = 934.000000
[Sun Oct  2 09:32:50 2011] Offset between fit and detection position for source 25 = 0.647714 pixels
[Sun Oct  2 09:32:50 2011] 401.213000 total counts/ 216.897000 bgd. counts: snr = 12.515156
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.647714 pixels
  Position = (401.6, 903.0) = 20 32 37.22 40 57 27.5
  Extent = 1.0 (0.8-1.1)", rotation angle = 0
  Source counts = 184.3 +/- 20.0
  Background counts = 216.9
  Rate = 0.008 +/- 0.0008
[Sun Oct  2 09:32:50 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 09:32:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 09:32:50 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 09:32:50 2011] Source does appear to be extended
[Sun Oct  2 09:32:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 09:33:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 09:33:31 2011] Initial guess for spatial extent in simple fitting = 0.98"
[Sun Oct  2 09:33:31 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.010
[Sun Oct  2 09:33:31 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 0.98"
[Sun Oct  2 09:33:33 2011] fullrun_ccd0_acisf10939_pi14-548_cl_pass1_src25.ximg exists
[Sun Oct  2 09:33:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10939_pi14-548_cl_pass1_src25.csv
[Sun Oct  2 09:33:33 2011] fullrun_ccd0_acisf10939_pi14-548_cl_pass1_src25_1.ximg exists
[Sun Oct  2 09:33:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10939_pi14-548_cl_pass1_src25.csv
[Sun Oct  2 09:33:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10939_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10939_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 09:33:37 2011] fullrun_ccd0_acisf10939_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Sun Oct  2 09:33:37 2011] fullrun_ccd0_acisf10939_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Oct  2 09:33:37 2011] Fit fullrun_ccd0_acisf10939_pi14-548_cl_pass1_tfrozen_src25 appears to have run properly
[Sun Oct  2 09:34:22 2011] Spatial fit model total counts = 575.511000, observed total counts = 577.000000
[Sun Oct  2 09:34:22 2011] Offset between fit and detection position for source 25 = 0.092544 pixels
[Sun Oct  2 09:34:22 2011] 314.342000 total counts/ 100.357000 bgd. counts: snr = 21.360406
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.092544 pixels
  Position = (401.6, 902.9) = 20 32 37.22 40 57 27.5
  Extent = 1.1 (0.9-1.2)", rotation angle = 0
  Source counts = 214.0 +/- 17.7
  Background counts = 100.4
  Rate = 0.009 +/- 0.0007
[Sun Oct  2 09:34:22 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 09:34:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 09:34:22 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 09:34:22 2011] Source does appear to be extended
[Sun Oct  2 09:34:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 09:34:22 2011] Source is confused with source 24
[Sun Oct  2 09:34:59 2011] Not overwriting source region fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src25_src.reg
[Sun Oct  2 09:34:59 2011] Extracting stamp from image fullrun_ccd0_acisf10939_pi14-548_cl_sm2.00.img.gz, (353, 854) - (450, 951)
[Sun Oct  2 09:34:59 2011] Writing fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src25.gif
[Sun Oct  2 09:37:06 2011] ../../acisf10939/products/events/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src25_src.evt and ../../acisf10939/products/events/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src25_bgd.evt exist, delete to re-create
[Sun Oct  2 09:37:06 2011] Size of ../../acisf10939/products/events/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src25_src.evt.gz[events] = 587 counts
[Sun Oct  2 09:37:06 2011] Mean chipx,y = (894.69, 387.93)
[Sun Oct  2 09:37:06 2011] Mean tdetx,y = (3448.93, 4237.31)
[Sun Oct  2 09:37:06 2011] chipx,y range = (873.00-920.00, 365.00-412.00)
[Sun Oct  2 09:37:06 2011] Size of ../../acisf10939/products/events/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 805 counts
[Sun Oct  2 09:37:06 2011] ../../acisf10939/products/images/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src25_src.img and ../../acisf10939/products/images/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src25_bgd.img exist, delete to re-create
[Sun Oct  2 09:37:06 2011] ../../acisf10939/products/spectra/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src25_src.pi and ../../acisf10939/products/spectra/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src25_bgd.pi exist, delete to re-create
[Sun Oct  2 09:37:11 2011] ../../acisf10939/products/lightcurves/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src25_src.lc and ../../acisf10939/products/lightcurves/fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src25_bgd.lc exist, delete to re-create
[Sun Oct  2 09:46:05 2011] Keeping rmf generated by specextract
[Sun Oct  2 09:46:05 2011] 181.923
[Sun Oct  2 09:50:24 2011] Updating aperture counts using extracted products
[Sun Oct  2 09:50:25 2011] Error reading totcts from fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src25_src.pi.gz
[Sun Oct  2 09:50:26 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  2 09:50:26 2011] Using photon index=1.80, rate=0.00889, arf fullrun_ccd0_acisf10939_pi14-548_pass1_cl_src25.arf
[Sun Oct  2 09:50:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  2 09:50:26 2011] Updating source flux to 1.5e-13
[Sun Oct  2 09:50:35 2011] Flag c found in src. 25 procflags, skipping spectral fitting