[Sun Oct 16 22:30:19 2011] Detection parameters:
  Position = (361.1, 254.3) = 18 46 25.07 -2 58 24.2
  Extent = 0.9" x 0.9", rotation angle = 146 degrees
  Source counts = 12182.5 +/- 122.7
  Background counts = 2876.5
  Rate = 0.3 +/- 0.003

[Sun Oct 16 22:30:20 2011] Off-axis axis estimate = 0.38'
[Sun Oct 16 22:30:35 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 22:30:35 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Sun Oct 16 22:30:35 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.872
[Sun Oct 16 22:30:35 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.40"
[Sun Oct 16 22:30:35 2011] fullrun_ccd7_acisf10938_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 16 22:30:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10938_pi14-548_cl_pass0_src1.csv
[Sun Oct 16 22:30:35 2011] fullrun_ccd7_acisf10938_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 16 22:30:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10938_pi14-548_cl_pass0_src1.csv
[Sun Oct 16 22:30:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10938_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10938_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 22:30:35 2011] fullrun_ccd7_acisf10938_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 16 22:30:35 2011] fullrun_ccd7_acisf10938_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 16 22:30:35 2011] Fit fullrun_ccd7_acisf10938_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 16 22:30:38 2011] Spatial fit model total counts = 8408.260000, observed total counts = 8409.000000
[Sun Oct 16 22:30:38 2011] Offset between fit and detection position for source 1 = 2.073095 pixels
[Sun Oct 16 22:30:38 2011] 8336.310000 total counts/ 5611.170000 bgd. counts: snr = 36.379951
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.073095 pixels
  Position = (359.3, 255.3) = 18 46 25.15 -2 58 23.9
  Extent = 1.5 (1.5-3.0)", rotation angle = 0
  Source counts = 2725.1 +/- 91.3
  Background counts = 5611.2
  Rate = 0.06 +/- 0.002
[Sun Oct 16 22:30:38 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 22:30:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 22:30:38 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 22:30:38 2011] Source does appear to be extended
[Sun Oct 16 22:30:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 22:30:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 22:30:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 16 22:30:41 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Sun Oct 16 22:30:41 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Sun Oct 16 22:30:41 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.50"
[Sun Oct 16 22:30:43 2011] fullrun_ccd7_acisf10938_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 16 22:30:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10938_pi14-548_cl_pass1_src1.csv
[Sun Oct 16 22:30:43 2011] fullrun_ccd7_acisf10938_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 16 22:30:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10938_pi14-548_cl_pass1_src1.csv
[Sun Oct 16 22:30:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10938_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10938_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 22:30:43 2011] fullrun_ccd7_acisf10938_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 16 22:30:43 2011] fullrun_ccd7_acisf10938_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 16 22:30:43 2011] Fit fullrun_ccd7_acisf10938_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 16 22:30:46 2011] Warning, spatial fit 1 centroid is now closest to src. 2
[Sun Oct 16 22:30:46 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 22:30:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 22:30:46 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 22:30:46 2011] Source does appear to be extended
[Sun Oct 16 22:30:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 22:30:48 2011] Not overwriting source region fullrun_ccd7_acisf10938_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 16 22:30:48 2011] Extracting stamp from image fullrun_ccd7_acisf10938_pi14-548_cl_sm2.00.img.gz, (291, 187) - (428, 324)
[Sun Oct 16 22:30:48 2011] Writing fullrun_ccd7_acisf10938_pi14-548_pass1_cl_src1.gif
[Sun Oct 16 22:30:49 2011] ../../acisf10938/products/events/fullrun_ccd7_acisf10938_pi14-548_pass1_cl_src1_src.evt and ../../acisf10938/products/events/fullrun_ccd7_acisf10938_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 16 22:30:49 2011] Size of ../../acisf10938/products/events/fullrun_ccd7_acisf10938_pi14-548_pass1_cl_src1_src.evt.gz[events] = 11849 counts
[Sun Oct 16 22:30:49 2011] Mean chipx,y = (231.76, 517.69)
[Sun Oct 16 22:30:49 2011] Mean tdetx,y = (4148.76, 2219.69)
[Sun Oct 16 22:30:49 2011] chipx,y range = (205.00-261.00, 489.00-545.00)
[Sun Oct 16 22:30:49 2011] Size of ../../acisf10938/products/events/fullrun_ccd7_acisf10938_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 7046 counts
[Sun Oct 16 22:30:49 2011] ../../acisf10938/products/images/fullrun_ccd7_acisf10938_pi14-548_pass1_cl_src1_src.img and ../../acisf10938/products/images/fullrun_ccd7_acisf10938_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 16 22:30:49 2011] ../../acisf10938/products/spectra/fullrun_ccd7_acisf10938_pi14-548_pass1_cl_src1_src.pi and ../../acisf10938/products/spectra/fullrun_ccd7_acisf10938_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct 16 22:30:52 2011] ../../acisf10938/products/lightcurves/fullrun_ccd7_acisf10938_pi14-548_pass1_cl_src1_src.lc and ../../acisf10938/products/lightcurves/fullrun_ccd7_acisf10938_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 16 22:31:02 2011] Keeping rmf generated by specextract
[Sun Oct 16 22:31:02 2011] 235.441
[Sun Oct 16 22:31:02 2011] Updating aperture counts using extracted products
[Sun Oct 16 22:31:02 2011] Error reading totcts from fullrun_ccd7_acisf10938_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 16 22:31:02 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 22:31:02 2011] Using photon index=1.80, rate=0.0611, arf fullrun_ccd7_acisf10938_pi14-548_pass1_cl_src1.arf
[Sun Oct 16 22:31:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 22:31:02 2011] Updating source flux to 8.7e-13
[Sun Oct 16 22:31:37 2011] Reading fit data from acisf10938/analysis//spectral/fullrun_ccd7_acisf10938_pi14-548_pass1_cl_src1_pl.csv
[Sun Oct 16 22:31:37 2011] Spectral fit parameter nH value = 4.21352e+22
[Sun Oct 16 22:31:37 2011] Spectral fit parameter PhoIndex value = 1.97682
[Sun Oct 16 22:31:37 2011] Failed to get F(0.3-8.0) from acisf10938/analysis//spectral/fullrun_ccd7_acisf10938_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Oct 16 22:31:37 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 22:31:37 2011] Using Nh = 4.2e+22, photon index=1.98, rate=0.0611, arf fullrun_ccd7_acisf10938_pi14-548_pass1_cl_src1.arf
[Sun Oct 16 22:31:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 22:31:37 2011] Updating source flux to 1.2e-12