[Fri Oct 28 15:35:18 2011] Detection parameters:
  Position = (179.4, 610.2) = 14 13 9.95 -65 20 20.8
  Extent = 0.5" x 0.5", rotation angle = 22 degrees
  Source counts = 6319.8 +/- 80.6
  Background counts = 184.2
  Rate = 0.3 +/- 0.004

[Fri Oct 28 15:35:18 2011] Off-axis axis estimate = 1.88'
[Fri Oct 28 15:35:30 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 15:35:30 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Fri Oct 28 15:35:30 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.232
[Fri Oct 28 15:35:30 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.42"
[Fri Oct 28 15:35:31 2011] fullrun_ccd7_acisf10937_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 28 15:35:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10937_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 15:35:31 2011] fullrun_ccd7_acisf10937_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 28 15:35:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10937_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 15:35:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10937_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10937_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 15:35:31 2011] fullrun_ccd7_acisf10937_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 28 15:35:31 2011] fullrun_ccd7_acisf10937_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 28 15:35:31 2011] Fit fullrun_ccd7_acisf10937_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 28 15:35:34 2011] Spatial fit model total counts = 6610.420000, observed total counts = 6612.000000
[Fri Oct 28 15:35:34 2011] Offset between fit and detection position for source 1 = 0.617438 pixels
[Fri Oct 28 15:35:34 2011] 6707.270000 total counts/ 1409.850000 bgd. counts: snr = 141.084061
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.617438 pixels
  Position = (179.8, 610.7) = 14 13 9.96 -65 20 20.8
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 5297.4 +/- 81.9
  Background counts = 1409.8
  Rate = 0.3 +/- 0.004
[Fri Oct 28 15:35:34 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 15:35:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 15:35:34 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 15:35:34 2011] Source does appear to be extended
[Fri Oct 28 15:35:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 15:35:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 15:35:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 15:35:38 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Fri Oct 28 15:35:38 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.863
[Fri Oct 28 15:35:38 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.55"
[Fri Oct 28 15:35:39 2011] fullrun_ccd7_acisf10937_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 28 15:35:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10937_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 15:35:39 2011] fullrun_ccd7_acisf10937_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 28 15:35:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10937_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 15:35:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10937_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10937_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 15:35:39 2011] fullrun_ccd7_acisf10937_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 28 15:35:39 2011] fullrun_ccd7_acisf10937_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 28 15:35:39 2011] Fit fullrun_ccd7_acisf10937_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 28 15:35:41 2011] Spatial fit model total counts = 6662.540000, observed total counts = 6658.000000
[Fri Oct 28 15:35:41 2011] Offset between fit and detection position for source 1 = 0.007449 pixels
[Fri Oct 28 15:35:41 2011] 6738.750000 total counts/ 1390.720000 bgd. counts: snr = 143.408200
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.007449 pixels
  Position = (179.8, 610.7) = 14 13 9.95 -65 20 20.8
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 5348.0 +/- 82.1
  Background counts = 1390.7
  Rate = 0.3 +/- 0.004
[Fri Oct 28 15:35:41 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 15:35:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 15:35:41 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 15:35:41 2011] Source does appear to be extended
[Fri Oct 28 15:35:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 15:35:41 2011] Source is confused with source 5
[Fri Oct 28 15:35:45 2011] Not overwriting source region fullrun_ccd7_acisf10937_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 28 15:35:45 2011] Extracting stamp from image fullrun_ccd7_acisf10937_pi14-548_cl_sm2.00.img.gz, (155, 585) - (205, 636)
[Fri Oct 28 15:35:45 2011] Writing fullrun_ccd7_acisf10937_pi14-548_pass1_cl_src1.gif
[Fri Oct 28 15:35:46 2011] ../../acisf10937/products/events/fullrun_ccd7_acisf10937_pi14-548_pass1_cl_src1_src.evt and ../../acisf10937/products/events/fullrun_ccd7_acisf10937_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 28 15:35:47 2011] Size of ../../acisf10937/products/events/fullrun_ccd7_acisf10937_pi14-548_pass1_cl_src1_src.evt.gz[events] = 5807 counts
[Fri Oct 28 15:35:47 2011] Mean chipx,y = (417.19, 123.63)
[Fri Oct 28 15:35:47 2011] Mean tdetx,y = (4334.19, 1825.63)
[Fri Oct 28 15:35:47 2011] chipx,y range = (397.00-439.00, 102.00-144.00)
[Fri Oct 28 15:35:47 2011] Size of ../../acisf10937/products/events/fullrun_ccd7_acisf10937_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 156 counts
[Fri Oct 28 15:35:47 2011] ../../acisf10937/products/images/fullrun_ccd7_acisf10937_pi14-548_pass1_cl_src1_src.img and ../../acisf10937/products/images/fullrun_ccd7_acisf10937_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 28 15:35:47 2011] ../../acisf10937/products/spectra/fullrun_ccd7_acisf10937_pi14-548_pass1_cl_src1_src.pi and ../../acisf10937/products/spectra/fullrun_ccd7_acisf10937_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 28 15:35:49 2011] ../../acisf10937/products/lightcurves/fullrun_ccd7_acisf10937_pi14-548_pass1_cl_src1_src.lc and ../../acisf10937/products/lightcurves/fullrun_ccd7_acisf10937_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 28 15:36:27 2011] Keeping rmf generated by specextract
[Fri Oct 28 15:36:27 2011] 234.951
[Fri Oct 28 15:36:28 2011] Updating aperture counts using extracted products
[Fri Oct 28 15:36:28 2011] Error reading totcts from fullrun_ccd7_acisf10937_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 28 15:36:28 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 15:36:28 2011] Using photon index=1.80, rate=0.292, arf fullrun_ccd7_acisf10937_pi14-548_pass1_cl_src1.arf
[Fri Oct 28 15:36:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 15:36:28 2011] Updating source flux to 2.9e-12
[Fri Oct 28 15:36:29 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Oct 28 15:36:56 2011] Reading fit data from acisf10937/analysis//spectral/fullrun_ccd7_acisf10937_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct 28 15:36:56 2011] Spectral fit parameter nH value = 1.45545e+21
[Fri Oct 28 15:36:56 2011] Spectral fit parameter PhoIndex value = -0.181015
[Fri Oct 28 15:36:56 2011] Failed to get F(0.3-8.0) from acisf10937/analysis//spectral/fullrun_ccd7_acisf10937_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 28 15:36:56 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 15:36:56 2011] Using Nh = 1.5e+21, photon index=-0.18, rate=0.292, arf fullrun_ccd7_acisf10937_pi14-548_pass1_cl_src1.arf
[Fri Oct 28 15:36:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 15:36:56 2011] Updating source flux to 7e-12