[Sat Feb 25 04:40:23 2012] Detection parameters:
  Position = (916.8, 1046.4) = 23 6 9.12 62 31 36.6
  Extent = 0.5" x 0.5", rotation angle = 93 degrees
  Source counts = 15.2 +/- 4.0
  Background counts = 0.8
  Rate = 0.0003 +/- 9e-05

[Sat Feb 25 04:40:24 2012] Off-axis axis estimate = 2.68'
[Sat Feb 25 05:59:28 2012] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 05:59:28 2012] Initial guess for spatial extent in simple fitting = 0.52"
[Sat Feb 25 05:59:28 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.925
[Sat Feb 25 05:59:28 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 0.52"
[Sat Feb 25 06:39:28 2012] fullrun_ccd3_acisf10934_pi14-548_cl_pass0_src25.ximg exists
[Sat Feb 25 06:39:28 2012] fullrun_ccd3_acisf10934_pi14-548_cl_pass0_src25_1.ximg exists
[Sat Feb 25 06:39:28 2012] Fit fullrun_ccd3_acisf10934_pi14-548_cl_pass0_src25 appears to have run properly
[Sat Feb 25 06:39:28 2012] fullrun_ccd3_acisf10934_pi14-548_cl_pass0_tfrozen_src25.ximg exists
[Sat Feb 25 06:39:28 2012] fullrun_ccd3_acisf10934_pi14-548_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Feb 25 06:39:28 2012] Fit fullrun_ccd3_acisf10934_pi14-548_cl_pass0_tfrozen_src25 appears to have run properly
[Sat Feb 25 06:59:41 2012] Spatial fit model total counts = 20.745000, observed total counts = 21.000000
[Sat Feb 25 06:59:41 2012] Offset between fit and detection position for source 19 = 0.536207 pixels
[Sat Feb 25 06:59:41 2012] 20.356400 total counts/ 5.728600 bgd. counts: snr = 6.111598
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.536207 pixels
  Position = (917.3, 1046.5) = 23 6 9.12 62 31 36.4
  Extent = 0.4 (0.3-0.7)", rotation angle = 0
  Source counts = 14.6 +/- 4.5
  Background counts = 5.7
  Rate = 0.0003 +/- 0.0001
[Sat Feb 25 06:59:41 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 06:59:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 06:59:41 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 06:59:41 2012] Source does appear to be extended
[Sat Feb 25 06:59:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 07:59:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 07:59:49 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Sat Feb 25 07:59:49 2012] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.272
[Sat Feb 25 07:59:49 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 0.41"
[Sat Feb 25 08:32:22 2012] fullrun_ccd3_acisf10934_pi14-548_cl_pass1_src25.ximg exists
[Sat Feb 25 08:32:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10934_pi14-548_cl_pass1_src25.csv
[Sat Feb 25 08:32:22 2012] fullrun_ccd3_acisf10934_pi14-548_cl_pass1_src25_1.ximg exists
[Sat Feb 25 08:32:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10934_pi14-548_cl_pass1_src25.csv
[Sat Feb 25 08:32:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10934_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10934_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 08:32:22 2012] fullrun_ccd3_acisf10934_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Sat Feb 25 08:32:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10934_pi14-548_cl_pass1_tfrozen_src25.csv
[Sat Feb 25 08:32:22 2012] fullrun_ccd3_acisf10934_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Feb 25 08:32:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10934_pi14-548_cl_pass1_tfrozen_src25.csv
[Sat Feb 25 08:32:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10934_pi14-548_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10934_pi14-548_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 08:49:15 2012] Spatial fit model total counts = 20.347700, observed total counts = 23.000000
[Sat Feb 25 08:49:15 2012] Offset between fit and detection position for source 19 = 0.060124 pixels
[Sat Feb 25 08:49:15 2012] 19.607930 total counts/ 5.732830 bgd. counts: snr = 5.794975
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.060124 pixels
  Position = (917.4, 1046.5) = 23 6 9.12 62 31 36.4
  Extent = 0.4 (0.3-0.7)", rotation angle = 0
  Source counts = 13.9 +/- 4.4
  Background counts = 5.7
  Rate = 0.0003 +/- 0.0001
[Sat Feb 25 08:49:15 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 08:49:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 08:49:15 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 08:49:15 2012] Source does appear to be extended
[Sat Feb 25 08:49:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 09:29:50 2012] Writing source region out to fullrun_ccd3_acisf10934_pi14-548_pass1_cl_src19_src.reg
[Sat Feb 25 09:29:50 2012] Extracting stamp from image fullrun_ccd3_acisf10934_pi14-548_cl_sm2.00.img.gz, (899, 1028) - (936, 1065)
[Sat Feb 25 09:29:50 2012] Writing fullrun_ccd3_acisf10934_pi14-548_pass1_cl_src19.gif
[Sat Feb 25 09:41:40 2012] Size of ../../acisf10934/products/events/fullrun_ccd3_acisf10934_pi14-548_pass1_cl_src19_src.evt.gz[events] = 14 counts
[Sat Feb 25 09:41:40 2012] Mean chipx,y = (996.36, 692.79)
[Sat Feb 25 09:41:40 2012] Mean tdetx,y = (4439.21, 4057.36)
[Sat Feb 25 09:41:40 2012] chipx,y range = (977.00-1012.00, 681.00-714.00)
[Sat Feb 25 09:41:40 2012] Size of ../../acisf10934/products/events/fullrun_ccd3_acisf10934_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 11 counts
[Sat Feb 25 09:41:41 2012] Not generating rmf since there are only 13 counts
[Sat Feb 25 09:41:41 2012] arf not found, will run specextract
[Sat Feb 25 09:42:10 2012] ../../acisf10934/products/spectra/fullrun_ccd3_acisf10934_pi14-548_pass1_cl_src19.warf not found
[Sat Feb 25 09:42:10 2012] ../../acisf10934/products/spectra/fullrun_ccd3_acisf10934_pi14-548_pass1_cl_src19.wrmf not found
[Sat Feb 25 09:42:10 2012] Removal of ../../acisf10934/products/spectra/fullrun_ccd3_acisf10934_pi14-548_pass1_cl_src19.soff failed
[Sat Feb 25 09:51:21 2012] Spectrum 19 has only 14 counts, deleting rmf
[Sat Feb 25 09:51:21 2012] 200.299
[Sat Feb 25 09:52:20 2012] Updating aperture counts using extracted products
[Sat Feb 25 09:52:20 2012] Error reading totcts from fullrun_ccd3_acisf10934_pi14-548_pass1_cl_src19_src.pi.gz
[Sat Feb 25 09:52:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 09:52:20 2012] Using photon index=1.80, rate=0.000315, arf fullrun_ccd3_acisf10934_pi14-548_pass1_cl_src19.arf
[Sat Feb 25 09:52:20 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 25 09:52:20 2012] Updating source flux to 4.4e-15
[Sat Feb 25 09:52:46 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting