[Sat Oct  1 01:51:09 2011] Detection parameters:
  Position = (706.7, 836.9) = 17 48 38.92 -27 13 43.7
  Extent = 0.9" x 0.6", rotation angle = 133 degrees
  Source counts = 10.5 +/- 3.6
  Background counts = 2.5
  Rate = 0.0001 +/- 4e-05

[Sat Oct  1 01:51:10 2011] Off-axis axis estimate = 3.71'
[Sat Oct  1 01:53:00 2011] Using EEF radius (= 0.75 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 01:53:00 2011] Initial guess for spatial extent in simple fitting = 0.75"
[Sat Oct  1 01:53:00 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.981
[Sat Oct  1 01:53:00 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 0.75"
[Sat Oct  1 01:53:03 2011] fullrun_ccd6_acisf10930_pi14-548_cl_pass0_src14.ximg exists
[Sat Oct  1 01:53:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10930_pi14-548_cl_pass0_src14.csv
[Sat Oct  1 01:53:03 2011] fullrun_ccd6_acisf10930_pi14-548_cl_pass0_src14_1.ximg exists
[Sat Oct  1 01:53:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10930_pi14-548_cl_pass0_src14.csv
[Sat Oct  1 01:53:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10930_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10930_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 01:53:03 2011] fullrun_ccd6_acisf10930_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Sat Oct  1 01:53:03 2011] fullrun_ccd6_acisf10930_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Oct  1 01:53:03 2011] Fit fullrun_ccd6_acisf10930_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Sat Oct  1 01:53:33 2011] Spatial fit model total counts = 13.292700, observed total counts = 13.000000
[Sat Oct  1 01:53:33 2011] Offset between fit and detection position for source 11 = 0.953789 pixels
[Sat Oct  1 01:53:33 2011] 13.232800 total counts/ 0.000000 bgd. counts: snr = 714623848278273.375000
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.953789 pixels
  Position = (707.7, 837.1) = 17 48 38.91 -27 13 43.9
  Extent = 0.9 (0.7-1.2)", rotation angle = 0
  Source counts = 13.2 +/- 3.6
  Background counts = 0.0
  Rate = 0.0002 +/- 4e-05
[Sat Oct  1 01:53:33 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 01:53:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 01:53:33 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 01:53:33 2011] Source does appear to be extended
[Sat Oct  1 01:53:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 01:54:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 01:54:03 2011] Initial guess for spatial extent in simple fitting = 0.95"
[Sat Oct  1 01:54:03 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.852
[Sat Oct  1 01:54:03 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 0.95"
[Sat Oct  1 01:54:04 2011] fullrun_ccd6_acisf10930_pi14-548_cl_pass1_src14.ximg exists
[Sat Oct  1 01:54:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10930_pi14-548_cl_pass1_src14.csv
[Sat Oct  1 01:54:04 2011] fullrun_ccd6_acisf10930_pi14-548_cl_pass1_src14_1.ximg exists
[Sat Oct  1 01:54:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10930_pi14-548_cl_pass1_src14.csv
[Sat Oct  1 01:54:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10930_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10930_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 01:54:04 2011] fullrun_ccd6_acisf10930_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Sat Oct  1 01:54:04 2011] fullrun_ccd6_acisf10930_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Sat Oct  1 01:54:04 2011] Fit fullrun_ccd6_acisf10930_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Sat Oct  1 01:54:19 2011] Spatial fit model total counts = 13.400900, observed total counts = 13.000000
[Sat Oct  1 01:54:19 2011] Offset between fit and detection position for source 11 = 0.124953 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.124953 pixels
  Position = (707.6, 837.1) = 17 48 38.91 -27 13 43.8
  Extent = 1.0 (0.7-1.4)", rotation angle = 0
  Source counts = 13.3 +/- 3.7
  Background counts = 0.0
  Rate = 0.0002 +/- 4e-05
[Sat Oct  1 01:54:19 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 01:54:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 01:54:19 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 01:54:19 2011] Source does appear to be extended
[Sat Oct  1 01:54:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 01:55:15 2011] Not overwriting source region fullrun_ccd6_acisf10930_pi14-548_pass1_cl_src11_src.reg
[Sat Oct  1 01:55:15 2011] Extracting stamp from image fullrun_ccd6_acisf10930_pi14-548_cl_sm2.00.img.gz, (663, 793) - (752, 881)
[Sat Oct  1 01:55:15 2011] Writing fullrun_ccd6_acisf10930_pi14-548_pass1_cl_src11.gif
[Sat Oct  1 01:55:59 2011] ../../acisf10930/products/events/fullrun_ccd6_acisf10930_pi14-548_pass1_cl_src11_src.evt and ../../acisf10930/products/events/fullrun_ccd6_acisf10930_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sat Oct  1 01:55:59 2011] Size of ../../acisf10930/products/events/fullrun_ccd6_acisf10930_pi14-548_pass1_cl_src11_src.evt.gz[events] = 13 counts
[Sat Oct  1 01:55:59 2011] Mean chipx,y = (826.77, 690.15)
[Sat Oct  1 01:55:59 2011] Mean tdetx,y = (3701.77, 2392.15)
[Sat Oct  1 01:55:59 2011] chipx,y range = (813.00-839.00, 677.00-711.00)
[Sat Oct  1 01:55:59 2011] Size of ../../acisf10930/products/events/fullrun_ccd6_acisf10930_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 61 counts
[Sat Oct  1 01:55:59 2011] ../../acisf10930/products/images/fullrun_ccd6_acisf10930_pi14-548_pass1_cl_src11_src.img and ../../acisf10930/products/images/fullrun_ccd6_acisf10930_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Sat Oct  1 01:55:59 2011] ../../acisf10930/products/spectra/fullrun_ccd6_acisf10930_pi14-548_pass1_cl_src11_src.pi and ../../acisf10930/products/spectra/fullrun_ccd6_acisf10930_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Sat Oct  1 01:55:59 2011] Not generating rmf since there are only 13 counts
[Sat Oct  1 01:56:01 2011] ../../acisf10930/products/lightcurves/fullrun_ccd6_acisf10930_pi14-548_pass1_cl_src11_src.lc and ../../acisf10930/products/lightcurves/fullrun_ccd6_acisf10930_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sat Oct  1 01:56:16 2011] 200.031
[Sat Oct  1 01:59:26 2011] Updating aperture counts using extracted products
[Sat Oct  1 01:59:26 2011] Error reading totcts from fullrun_ccd6_acisf10930_pi14-548_pass1_cl_src11_src.pi.gz
[Sat Oct  1 01:59:27 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 01:59:27 2011] Using photon index=1.80, rate=0.000162, arf fullrun_ccd6_acisf10930_pi14-548_pass1_cl_src11.arf
[Sat Oct  1 01:59:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 01:59:27 2011] Updating source flux to 2.4e-15
[Sat Oct  1 01:59:41 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting