[Fri Oct 14 16:44:08 2011] Detection parameters:
  Position = (1184.5, 1003.6) = 16 22 38.52 -49 42 1.4
  Extent = 3.3" x 1.9", rotation angle = 51 degrees
  Source counts = 16.8 +/- 4.7
  Background counts = 5.2
  Rate = 0.0008 +/- 0.0002

[Fri Oct 14 16:44:10 2011] Off-axis axis estimate = 8.35'
[Fri Oct 14 16:45:01 2011] Using EEF radius (= 3.08 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 16:45:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 16:45:01 2011] Initial guess for spatial extent in simple fitting = 3.08"
[Fri Oct 14 16:45:01 2011] source mask rpix=6.3, npix_max = 183, mask sum = 169, frac = 0.922
[Fri Oct 14 16:45:01 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 3.08"
[Fri Oct 14 16:45:02 2011] fullrun_ccd3_acisf10929_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 14 16:45:02 2011] fullrun_ccd3_acisf10929_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 14 16:45:02 2011] Fit fullrun_ccd3_acisf10929_pi14-548_cl_pass0_src3 appears to have run properly
[Fri Oct 14 16:45:02 2011] fullrun_ccd3_acisf10929_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 14 16:45:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10929_pi14-548_cl_pass0_tfrozen_src3.csv
[Fri Oct 14 16:45:02 2011] fullrun_ccd3_acisf10929_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 14 16:45:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10929_pi14-548_cl_pass0_tfrozen_src3.csv
[Fri Oct 14 16:45:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10929_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10929_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 16:45:11 2011] Source 3 is offset by 6.875532 and -6.693891 pixels which is larger than
2 X fitted extent = 6.330122 x 6.330122, not incorporating fit results
[Fri Oct 14 16:45:11 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 16:45:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 16:45:11 2011] Assessing source extent using major
[Fri Oct 14 16:45:11 2011] Source does appear to be extended
[Fri Oct 14 16:45:11 2011] Computing asymmetry using major and minor axis, asym = 1.75
[Fri Oct 14 16:45:11 2011] Source is asymmetric
[Fri Oct 14 16:45:46 2011] Using EEF radius (= 3.08 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 16:45:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 16:45:46 2011] Initial guess for spatial extent in simple fitting = 3.08"
[Fri Oct 14 16:45:46 2011] source mask rpix=6.3, npix_max = 183, mask sum = 169, frac = 0.922
[Fri Oct 14 16:45:46 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 3.08"
[Fri Oct 14 16:45:48 2011] fullrun_ccd3_acisf10929_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 14 16:45:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10929_pi14-548_cl_pass1_src3.csv
[Fri Oct 14 16:45:48 2011] fullrun_ccd3_acisf10929_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 14 16:45:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10929_pi14-548_cl_pass1_src3.csv
[Fri Oct 14 16:45:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10929_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10929_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 16:45:48 2011] fullrun_ccd3_acisf10929_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 14 16:45:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10929_pi14-548_cl_pass1_tfrozen_src3.csv
[Fri Oct 14 16:45:48 2011] fullrun_ccd3_acisf10929_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 14 16:45:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10929_pi14-548_cl_pass1_tfrozen_src3.csv
[Fri Oct 14 16:45:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10929_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10929_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 16:45:58 2011] Spatial fit model total counts = 18.575800, observed total counts = 22.000000
[Fri Oct 14 16:45:58 2011] Offset between fit and detection position for source 3 = 4.610762 pixels
[Fri Oct 14 16:45:58 2011] 17.844006 total counts/ 0.002906 bgd. counts: snr = 330.962702
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.610762 pixels
  Position = (1186.6, 1007.8) = 16 22 38.44 -49 41 59.7
  Extent = 2.2 (1.9-3.2)", rotation angle = 0
  Source counts = 17.8 +/- 4.2
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Fri Oct 14 16:45:58 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 16:45:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 16:45:58 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 16:45:58 2011] Source does appear to be extended
[Fri Oct 14 16:45:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 16:48:06 2011] Not overwriting source region fullrun_ccd3_acisf10929_pi14-548_pass1_cl_src3_src.reg
[Fri Oct 14 16:48:06 2011] Extracting stamp from image fullrun_ccd3_acisf10929_pi14-548_cl_sm2.00.img.gz, (1085, 906) - (1288, 1110)
[Fri Oct 14 16:48:06 2011] Writing fullrun_ccd3_acisf10929_pi14-548_pass1_cl_src3.gif
[Fri Oct 14 16:48:12 2011] ../../acisf10929/products/events/fullrun_ccd3_acisf10929_pi14-548_pass1_cl_src3_src.evt and ../../acisf10929/products/events/fullrun_ccd3_acisf10929_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct 14 16:48:12 2011] Size of ../../acisf10929/products/events/fullrun_ccd3_acisf10929_pi14-548_pass1_cl_src3_src.evt.gz[events] = 21 counts
[Fri Oct 14 16:48:12 2011] Mean chipx,y = (873.24, 19.38)
[Fri Oct 14 16:48:12 2011] Mean tdetx,y = (5112.62, 3934.24)
[Fri Oct 14 16:48:12 2011] chipx,y range = (852.00-890.00, 3.00-41.00)
[Fri Oct 14 16:48:12 2011] Size of ../../acisf10929/products/events/fullrun_ccd3_acisf10929_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 41 counts
[Fri Oct 14 16:48:12 2011] ../../acisf10929/products/images/fullrun_ccd3_acisf10929_pi14-548_pass1_cl_src3_src.img and ../../acisf10929/products/images/fullrun_ccd3_acisf10929_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct 14 16:48:12 2011] ../../acisf10929/products/spectra/fullrun_ccd3_acisf10929_pi14-548_pass1_cl_src3_src.pi and ../../acisf10929/products/spectra/fullrun_ccd3_acisf10929_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct 14 16:48:12 2011] Not generating rmf since there are only 17 counts
[Fri Oct 14 16:48:15 2011] ../../acisf10929/products/lightcurves/fullrun_ccd3_acisf10929_pi14-548_pass1_cl_src3_src.lc and ../../acisf10929/products/lightcurves/fullrun_ccd3_acisf10929_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct 14 16:49:05 2011] 115.824
[Fri Oct 14 16:49:13 2011] Updating aperture counts using extracted products
[Fri Oct 14 16:49:13 2011] Error reading totcts from fullrun_ccd3_acisf10929_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct 14 16:49:13 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 16:49:13 2011] Using photon index=1.80, rate=0.000897, arf fullrun_ccd3_acisf10929_pi14-548_pass1_cl_src3.arf
[Fri Oct 14 16:49:13 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 16:49:13 2011] Updating source flux to 2.6e-14
[Fri Oct 14 16:49:22 2011] Flag b found in src. 3 procflags, skipping spectral fitting
[Fri Oct 14 16:49:22 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 14 16:49:23 2011] acisf10929/analysis//spectral/fullrun_ccd3_acisf10929_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete