[Fri Oct 14 16:44:03 2011] Detection parameters:
  Position = (511.3, 1268.9) = 16 22 44.89 -49 50 52.7
  Extent = 0.5" x 0.5", rotation angle = 175 degrees
  Source counts = 141.3 +/- 12.0
  Background counts = 1.7
  Rate = 0.007 +/- 0.0006

[Fri Oct 14 16:44:05 2011] Off-axis axis estimate = 1.85'
[Fri Oct 14 16:44:59 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 16:44:59 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Fri Oct 14 16:44:59 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.828
[Fri Oct 14 16:44:59 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.42"
[Fri Oct 14 16:45:00 2011] fullrun_ccd0_acisf10929_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 14 16:45:00 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10929_pi14-548_cl_pass0_src1.csv
[Fri Oct 14 16:45:00 2011] fullrun_ccd0_acisf10929_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 14 16:45:00 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf10929_pi14-548_cl_pass0_src1.csv
[Fri Oct 14 16:45:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10929_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10929_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 16:45:00 2011] fullrun_ccd0_acisf10929_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 14 16:45:00 2011] fullrun_ccd0_acisf10929_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 14 16:45:00 2011] Fit fullrun_ccd0_acisf10929_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 14 16:45:09 2011] Spatial fit model total counts = 149.418000, observed total counts = 147.000000
[Fri Oct 14 16:45:09 2011] Offset between fit and detection position for source 1 = 0.705313 pixels
[Fri Oct 14 16:45:09 2011] 149.031500 total counts/ 11.279500 bgd. counts: snr = 41.015970
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.705313 pixels
  Position = (511.8, 1269.4) = 16 22 44.89 -49 50 52.7
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 137.8 +/- 12.2
  Background counts = 11.3
  Rate = 0.007 +/- 0.0006
[Fri Oct 14 16:45:09 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 16:45:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 16:45:09 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 16:45:09 2011] Source does appear to be extended
[Fri Oct 14 16:45:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 16:45:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 16:45:32 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Fri Oct 14 16:45:32 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.126
[Fri Oct 14 16:45:32 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.45"
[Fri Oct 14 16:45:33 2011] fullrun_ccd0_acisf10929_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 14 16:45:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10929_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 16:45:33 2011] fullrun_ccd0_acisf10929_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 14 16:45:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf10929_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 16:45:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf10929_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf10929_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 16:45:33 2011] fullrun_ccd0_acisf10929_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 14 16:45:33 2011] fullrun_ccd0_acisf10929_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 14 16:45:33 2011] Fit fullrun_ccd0_acisf10929_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 14 16:45:54 2011] Spatial fit model total counts = 146.228000, observed total counts = 146.000000
[Fri Oct 14 16:45:54 2011] Offset between fit and detection position for source 1 = 0.008344 pixels
[Fri Oct 14 16:45:54 2011] 145.805530 total counts/ 9.731530 bgd. counts: snr = 43.619892
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008344 pixels
  Position = (511.8, 1269.4) = 16 22 44.89 -49 50 52.7
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 136.1 +/- 12.1
  Background counts = 9.7
  Rate = 0.007 +/- 0.0006
[Fri Oct 14 16:45:54 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 16:45:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 16:45:54 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 16:45:54 2011] Source does appear to be extended
[Fri Oct 14 16:45:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 16:46:14 2011] Not overwriting source region fullrun_ccd0_acisf10929_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 14 16:46:14 2011] Extracting stamp from image fullrun_ccd0_acisf10929_pi14-548_cl_sm2.00.img.gz, (491, 1249) - (532, 1290)
[Fri Oct 14 16:46:14 2011] Writing fullrun_ccd0_acisf10929_pi14-548_pass1_cl_src1.gif
[Fri Oct 14 16:46:15 2011] ../../acisf10929/products/events/fullrun_ccd0_acisf10929_pi14-548_pass1_cl_src1_src.evt and ../../acisf10929/products/events/fullrun_ccd0_acisf10929_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 14 16:46:15 2011] Size of ../../acisf10929/products/events/fullrun_ccd0_acisf10929_pi14-548_pass1_cl_src1_src.evt.gz[events] = 140 counts
[Fri Oct 14 16:46:15 2011] Mean chipx,y = (899.39, 1006.58)
[Fri Oct 14 16:46:15 2011] Mean tdetx,y = (4067.58, 4232.61)
[Fri Oct 14 16:46:15 2011] chipx,y range = (882.00-919.00, 991.00-1023.00)
[Fri Oct 14 16:46:15 2011] Size of ../../acisf10929/products/events/fullrun_ccd0_acisf10929_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 10 counts
[Fri Oct 14 16:46:15 2011] ../../acisf10929/products/images/fullrun_ccd0_acisf10929_pi14-548_pass1_cl_src1_src.img and ../../acisf10929/products/images/fullrun_ccd0_acisf10929_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 14 16:46:15 2011] ../../acisf10929/products/spectra/fullrun_ccd0_acisf10929_pi14-548_pass1_cl_src1_src.pi and ../../acisf10929/products/spectra/fullrun_ccd0_acisf10929_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 14 16:46:19 2011] ../../acisf10929/products/lightcurves/fullrun_ccd0_acisf10929_pi14-548_pass1_cl_src1_src.lc and ../../acisf10929/products/lightcurves/fullrun_ccd0_acisf10929_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 14 16:46:49 2011] Keeping rmf generated by specextract
[Fri Oct 14 16:46:49 2011] 173.461
[Fri Oct 14 16:49:12 2011] Updating aperture counts using extracted products
[Fri Oct 14 16:49:12 2011] Error reading totcts from fullrun_ccd0_acisf10929_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 14 16:49:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 16:49:12 2011] Using photon index=1.80, rate=0.00684, arf fullrun_ccd0_acisf10929_pi14-548_pass1_cl_src1.arf
[Fri Oct 14 16:49:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 16:49:12 2011] Updating source flux to 1.4e-13
[Fri Oct 14 16:49:20 2011] Reading fit data from acisf10929/analysis//spectral/fullrun_ccd0_acisf10929_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct 14 16:49:20 2011] Spectral fit parameter nH value = 1.64879e+23
[Fri Oct 14 16:49:20 2011] Spectral fit parameter PhoIndex value = 7.49803
[Fri Oct 14 16:49:20 2011] Failed to get F(0.3-8.0) from acisf10929/analysis//spectral/fullrun_ccd0_acisf10929_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 14 16:49:20 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 16:49:20 2011] Using Nh = 1.6e+23, photon index=7.50, rate=0.00684, arf fullrun_ccd0_acisf10929_pi14-548_pass1_cl_src1.arf
[Fri Oct 14 16:49:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 16:49:20 2011] Updating source flux to 1.3e-13