[Fri Feb 17 03:17:14 2012] Detection parameters:
  Position = (433.4, 178.5) = 17 48 49.01 -27 10 33.4
  Extent = 0.5" x 0.5", rotation angle = 127 degrees
  Source counts = 20.7 +/- 5.5
  Background counts = 9.3
  Rate = 0.0006 +/- 0.0002

[Fri Feb 17 03:17:15 2012] Off-axis axis estimate = 0.68'
[Fri Feb 17 03:50:09 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 03:50:09 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Feb 17 03:50:09 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.367
[Fri Feb 17 03:50:09 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 0.39"
[Fri Feb 17 04:20:33 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src20.ximg exists
[Fri Feb 17 04:20:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src20.csv
[Fri Feb 17 04:20:33 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src20_1.ximg exists
[Fri Feb 17 04:20:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src20.csv
[Fri Feb 17 04:20:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 04:20:33 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Fri Feb 17 04:20:33 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Feb 17 04:20:33 2012] Fit fullrun_ccd7_acisf10928_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Fri Feb 17 04:20:42 2012] Spatial fit model total counts = 55.193800, observed total counts = 56.000000
[Fri Feb 17 04:20:42 2012] Offset between fit and detection position for source 24 = 1.001963 pixels
[Fri Feb 17 04:20:42 2012] 59.325500 total counts/ 43.423200 bgd. counts: snr = 2.413232
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 1.001963 pixels
  Position = (434.1, 179.2) = 17 48 49.00 -27 10 33.4
  Extent = 0.5 (0.3-0.8)", rotation angle = 0
  Source counts = 15.9 +/- 7.7
  Background counts = 43.4
  Rate = 0.0004 +/- 0.0002
[Fri Feb 17 04:20:42 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 04:20:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 04:20:42 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 04:20:42 2012] Source does appear to be extended
[Fri Feb 17 04:20:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 04:51:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 04:51:15 2012] Initial guess for spatial extent in simple fitting = 0.49"
[Fri Feb 17 04:51:15 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.996
[Fri Feb 17 04:51:15 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 0.49"
[Fri Feb 17 05:17:04 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src18.ximg exists
[Fri Feb 17 05:17:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src18.csv
[Fri Feb 17 05:17:04 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src18_1.ximg exists
[Fri Feb 17 05:17:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src18.csv
[Fri Feb 17 05:17:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 05:17:05 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Fri Feb 17 05:17:05 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Feb 17 05:17:05 2012] Fit fullrun_ccd7_acisf10928_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Fri Feb 17 05:17:12 2012] Spatial fit model total counts = 59.819500, observed total counts = 60.000000
[Fri Feb 17 05:17:12 2012] Offset between fit and detection position for source 24 = 0.025147 pixels
[Fri Feb 17 05:17:12 2012] 63.415500 total counts/ 46.663000 bgd. counts: snr = 2.452411
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.025147 pixels
  Position = (434.2, 179.2) = 17 48 49.00 -27 10 33.4
  Extent = 0.5 (0.3-0.9)", rotation angle = 0
  Source counts = 16.8 +/- 8.0
  Background counts = 46.7
  Rate = 0.0005 +/- 0.0002
[Fri Feb 17 05:17:12 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 05:17:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 05:17:12 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 05:17:12 2012] Source does appear to be extended
[Fri Feb 17 05:17:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 05:26:17 2012] Writing source region out to fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src24_src.reg
[Fri Feb 17 05:26:17 2012] Extracting stamp from image fullrun_ccd7_acisf10928_pi14-548_cl_sm2.00.img.gz, (410, 155) - (458, 203)
[Fri Feb 17 05:26:17 2012] Writing fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src24.gif
[Fri Feb 17 05:30:26 2012] Size of ../../acisf10928/products/events/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src24_src.evt.gz[events] = 27 counts
[Fri Feb 17 05:30:26 2012] Mean chipx,y = (164.19, 420.33)
[Fri Feb 17 05:30:26 2012] Mean tdetx,y = (4081.19, 2122.33)
[Fri Feb 17 05:30:26 2012] chipx,y range = (145.00-181.00, 405.00-441.00)
[Fri Feb 17 05:30:26 2012] Size of ../../acisf10928/products/events/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src24_bgd.evt.gz[events] = 84 counts
[Fri Feb 17 05:30:27 2012] Not generating rmf since there are only 16 counts
[Fri Feb 17 05:30:27 2012] arf not found, will run specextract
[Fri Feb 17 05:30:34 2012] ../../acisf10928/products/spectra/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src24.warf not found
[Fri Feb 17 05:30:34 2012] ../../acisf10928/products/spectra/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src24.wrmf not found
[Fri Feb 17 05:30:34 2012] Removal of ../../acisf10928/products/spectra/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src24.soff failed
[Fri Feb 17 05:32:21 2012] Spectrum 24 has only 17 counts, deleting rmf
[Fri Feb 17 05:32:21 2012] 232.922
[Fri Feb 17 05:32:24 2012] Updating aperture counts using extracted products
[Fri Feb 17 05:32:24 2012] Error reading totcts from fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src24_src.pi.gz
[Fri Feb 17 05:32:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 05:32:24 2012] Using photon index=1.80, rate=0.000474, arf fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src24.arf
[Fri Feb 17 05:32:24 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 05:32:24 2012] Updating source flux to 5.9e-15
[Fri Feb 17 05:32:35 2012] Source 24 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Feb 17 05:32:36 2012] acisf10928/analysis//spectral/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete