[Fri Feb 17 03:17:14 2012] Detection parameters:
  Position = (743.7, 316.7) = 17 48 37.57 -27 9 25.4
  Extent = 0.5" x 0.5", rotation angle = 130 degrees
  Source counts = 15.5 +/- 4.1
  Background counts = 1.5
  Rate = 0.0004 +/- 0.0001

[Fri Feb 17 03:17:15 2012] Off-axis axis estimate = 2.12'
[Fri Feb 17 03:50:09 2012] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 03:50:09 2012] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Feb 17 03:50:09 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.149
[Fri Feb 17 03:50:09 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 0.44"
[Fri Feb 17 04:20:33 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src23.ximg exists
[Fri Feb 17 04:20:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src23.csv
[Fri Feb 17 04:20:33 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src23_1.ximg exists
[Fri Feb 17 04:20:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src23.csv
[Fri Feb 17 04:20:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 04:20:33 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Fri Feb 17 04:20:33 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Feb 17 04:20:33 2012] Fit fullrun_ccd7_acisf10928_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Feb 17 04:20:42 2012] Spatial fit model total counts = 23.842900, observed total counts = 24.000000
[Fri Feb 17 04:20:42 2012] Offset between fit and detection position for source 20 = 0.710290 pixels
[Fri Feb 17 04:20:42 2012] 24.163480 total counts/ 7.556980 bgd. counts: snr = 6.040932
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.710290 pixels
  Position = (744.3, 317.2) = 17 48 37.57 -27 9 25.4
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 16.6 +/- 4.9
  Background counts = 7.6
  Rate = 0.0005 +/- 0.0001
[Fri Feb 17 04:20:42 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 04:20:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 04:20:42 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 04:20:42 2012] Source does appear to be extended
[Fri Feb 17 04:20:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 04:51:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 04:51:15 2012] Initial guess for spatial extent in simple fitting = 0.46"
[Fri Feb 17 04:51:15 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.087
[Fri Feb 17 04:51:15 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 0.46"
[Fri Feb 17 05:17:04 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src21.ximg exists
[Fri Feb 17 05:17:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src21.csv
[Fri Feb 17 05:17:04 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src21_1.ximg exists
[Fri Feb 17 05:17:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src21.csv
[Fri Feb 17 05:17:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 05:17:05 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Fri Feb 17 05:17:05 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Fri Feb 17 05:17:05 2012] Fit fullrun_ccd7_acisf10928_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Fri Feb 17 05:17:12 2012] Spatial fit model total counts = 23.834200, observed total counts = 24.000000
[Fri Feb 17 05:17:12 2012] Offset between fit and detection position for source 20 = 0.000301 pixels
[Fri Feb 17 05:17:12 2012] 24.154860 total counts/ 7.553960 bgd. counts: snr = 6.040102
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.000301 pixels
  Position = (744.3, 317.2) = 17 48 37.57 -27 9 25.4
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 16.6 +/- 4.9
  Background counts = 7.6
  Rate = 0.0005 +/- 0.0001
[Fri Feb 17 05:17:12 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 05:17:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 05:17:12 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 05:17:12 2012] Source does appear to be extended
[Fri Feb 17 05:17:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 05:26:17 2012] Writing source region out to fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src20_src.reg
[Fri Feb 17 05:26:17 2012] Extracting stamp from image fullrun_ccd7_acisf10928_pi14-548_cl_sm2.00.img.gz, (723, 296) - (765, 338)
[Fri Feb 17 05:26:17 2012] Writing fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src20.gif
[Fri Feb 17 05:31:16 2012] Size of ../../acisf10928/products/events/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src20_src.evt.gz[events] = 18 counts
[Fri Feb 17 05:31:16 2012] Mean chipx,y = (303.00, 736.00)
[Fri Feb 17 05:31:16 2012] Mean tdetx,y = (4220.00, 2438.00)
[Fri Feb 17 05:31:16 2012] chipx,y range = (286.00-321.00, 716.00-749.00)
[Fri Feb 17 05:31:16 2012] Size of ../../acisf10928/products/events/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 15 counts
[Fri Feb 17 05:31:17 2012] Not generating rmf since there are only 16 counts
[Fri Feb 17 05:31:17 2012] arf not found, will run specextract
[Fri Feb 17 05:31:24 2012] ../../acisf10928/products/spectra/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src20.warf not found
[Fri Feb 17 05:31:24 2012] ../../acisf10928/products/spectra/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src20.wrmf not found
[Fri Feb 17 05:31:24 2012] Removal of ../../acisf10928/products/spectra/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src20.soff failed
[Fri Feb 17 05:32:21 2012] Spectrum 20 has only 17 counts, deleting rmf
[Fri Feb 17 05:32:21 2012] 233.548
[Fri Feb 17 05:32:24 2012] Updating aperture counts using extracted products
[Fri Feb 17 05:32:24 2012] Error reading totcts from fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src20_src.pi.gz
[Fri Feb 17 05:32:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 05:32:24 2012] Using photon index=1.80, rate=0.000469, arf fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src20.arf
[Fri Feb 17 05:32:24 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 05:32:24 2012] Updating source flux to 5.8e-15
[Fri Feb 17 05:32:35 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Feb 17 05:32:36 2012] acisf10928/analysis//spectral/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete