[Fri Feb 17 03:17:14 2012] Detection parameters:
  Position = (364.1, 281.1) = 17 48 51.57 -27 9 42.9
  Extent = 0.5" x 0.5", rotation angle = 174 degrees
  Source counts = 23.0 +/- 5.0
  Background counts = 2.0
  Rate = 0.0007 +/- 0.0001

[Fri Feb 17 03:17:15 2012] Off-axis axis estimate = 1.39'
[Fri Feb 17 03:50:09 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 03:50:09 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Feb 17 03:50:09 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.603
[Fri Feb 17 03:50:09 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 0.39"
[Fri Feb 17 04:20:33 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src19.ximg exists
[Fri Feb 17 04:20:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src19.csv
[Fri Feb 17 04:20:33 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src19_1.ximg exists
[Fri Feb 17 04:20:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src19.csv
[Fri Feb 17 04:20:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10928_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 04:20:33 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Fri Feb 17 04:20:33 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Feb 17 04:20:33 2012] Fit fullrun_ccd7_acisf10928_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Feb 17 04:20:42 2012] Spatial fit model total counts = 29.933600, observed total counts = 30.000000
[Fri Feb 17 04:20:42 2012] Offset between fit and detection position for source 19 = 0.696558 pixels
[Fri Feb 17 04:20:42 2012] 30.600170 total counts/ 9.496970 bgd. counts: snr = 6.847874
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.696558 pixels
  Position = (364.6, 281.5) = 17 48 51.56 -27 9 43.0
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 21.1 +/- 5.5
  Background counts = 9.5
  Rate = 0.0006 +/- 0.0002
[Fri Feb 17 04:20:42 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 04:20:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 04:20:42 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 04:20:42 2012] Source does appear to be extended
[Fri Feb 17 04:20:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 04:51:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 04:51:15 2012] Initial guess for spatial extent in simple fitting = 0.31"
[Fri Feb 17 04:51:15 2012] source mask rpix=0.6, npix_max = 5, mask sum = 6, frac = 1.176
[Fri Feb 17 04:51:15 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 0.31"
[Fri Feb 17 05:17:04 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src17.ximg exists
[Fri Feb 17 05:17:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src17.csv
[Fri Feb 17 05:17:04 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src17_1.ximg exists
[Fri Feb 17 05:17:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src17.csv
[Fri Feb 17 05:17:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10928_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 05:17:05 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Fri Feb 17 05:17:05 2012] fullrun_ccd7_acisf10928_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Feb 17 05:17:05 2012] Fit fullrun_ccd7_acisf10928_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Feb 17 05:17:12 2012] Spatial fit model total counts = 29.570500, observed total counts = 30.000000
[Fri Feb 17 05:17:12 2012] Offset between fit and detection position for source 19 = 0.012828 pixels
[Fri Feb 17 05:17:12 2012] 30.311690 total counts/ 9.419190 bgd. counts: snr = 6.807437
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.012828 pixels
  Position = (364.7, 281.5) = 17 48 51.56 -27 9 43.0
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 20.9 +/- 5.5
  Background counts = 9.4
  Rate = 0.0006 +/- 0.0002
[Fri Feb 17 05:17:12 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 05:17:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 05:17:12 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 05:17:12 2012] Source does appear to be extended
[Fri Feb 17 05:17:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 05:26:17 2012] Writing source region out to fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src19_src.reg
[Fri Feb 17 05:26:17 2012] Extracting stamp from image fullrun_ccd7_acisf10928_pi14-548_cl_sm2.00.img.gz, (350, 267) - (380, 296)
[Fri Feb 17 05:26:17 2012] Writing fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src19.gif
[Fri Feb 17 05:30:10 2012] Size of ../../acisf10928/products/events/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src19_src.evt.gz[events] = 22 counts
[Fri Feb 17 05:30:10 2012] Mean chipx,y = (264.73, 349.82)
[Fri Feb 17 05:30:10 2012] Mean tdetx,y = (4181.73, 2051.82)
[Fri Feb 17 05:30:10 2012] chipx,y range = (249.00-283.00, 335.00-369.00)
[Fri Feb 17 05:30:10 2012] Size of ../../acisf10928/products/events/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 10 counts
[Fri Feb 17 05:30:11 2012] Not generating rmf since there are only 20 counts
[Fri Feb 17 05:30:11 2012] arf not found, will run specextract
[Fri Feb 17 05:30:18 2012] ../../acisf10928/products/spectra/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src19.warf not found
[Fri Feb 17 05:30:18 2012] ../../acisf10928/products/spectra/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src19.wrmf not found
[Fri Feb 17 05:30:18 2012] Removal of ../../acisf10928/products/spectra/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src19.soff failed
[Fri Feb 17 05:32:21 2012] Spectrum 19 has only 21 counts, deleting rmf
[Fri Feb 17 05:32:21 2012] 222.425
[Fri Feb 17 05:32:24 2012] Updating aperture counts using extracted products
[Fri Feb 17 05:32:24 2012] Error reading totcts from fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src19_src.pi.gz
[Fri Feb 17 05:32:24 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 05:32:24 2012] Using photon index=1.80, rate=0.000591, arf fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src19.arf
[Fri Feb 17 05:32:24 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 05:32:24 2012] Updating source flux to 7.7e-15
[Fri Feb 17 05:32:35 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Feb 17 05:32:36 2012] acisf10928/analysis//spectral/fullrun_ccd7_acisf10928_pi14-548_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete