[Tue Apr 10 21:36:18 2012] Detection parameters:
  Position = (513.3, 841.0) = 9 56 1.30 69 41 11.2
  Extent = 0.6" x 0.5", rotation angle = 14 degrees
  Source counts = 1065.6 +/- 33.6
  Background counts = 61.4
  Rate = 0.02 +/- 0.0008

[Tue Apr 10 21:36:24 2012] Off-axis axis estimate = 2.84'
[Tue Apr 10 21:37:28 2012] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:37:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 21:37:28 2012] Initial guess for spatial extent in simple fitting = 0.55"
[Tue Apr 10 21:37:28 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.149
[Tue Apr 10 21:37:28 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 0.55"
[Tue Apr 10 21:37:29 2012] fullrun_ccd7_acisf10925_pi14-548_cl_pass0_src10.ximg exists
[Tue Apr 10 21:37:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10925_pi14-548_cl_pass0_src10.csv
[Tue Apr 10 21:37:29 2012] fullrun_ccd7_acisf10925_pi14-548_cl_pass0_src10_1.ximg exists
[Tue Apr 10 21:37:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10925_pi14-548_cl_pass0_src10.csv
[Tue Apr 10 21:37:29 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10925_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10925_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:37:31 2012] fullrun_ccd7_acisf10925_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Tue Apr 10 21:37:31 2012] fullrun_ccd7_acisf10925_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Apr 10 21:37:31 2012] Fit fullrun_ccd7_acisf10925_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Apr 10 21:37:48 2012] Spatial fit model total counts = 1186.000000, observed total counts = 1186.000000
[Tue Apr 10 21:37:48 2012] Offset between fit and detection position for source 10 = 0.643958 pixels
[Tue Apr 10 21:37:48 2012] 1185.575000 total counts/ 183.585000 bgd. counts: snr = 73.951126
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.643958 pixels
  Position = (513.7, 841.5) = 9 56 1.31 69 41 11.2
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 1002.0 +/- 34.4
  Background counts = 183.6
  Rate = 0.02 +/- 0.0008
[Tue Apr 10 21:37:48 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:37:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:37:48 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:37:48 2012] Source does appear to be extended
[Tue Apr 10 21:37:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:38:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:38:08 2012] Initial guess for spatial extent in simple fitting = 0.64"
[Tue Apr 10 21:38:08 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.699
[Tue Apr 10 21:38:08 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 0.64"
[Tue Apr 10 21:38:09 2012] fullrun_ccd7_acisf10925_pi14-548_cl_pass1_src10.ximg exists
[Tue Apr 10 21:38:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10925_pi14-548_cl_pass1_src10.csv
[Tue Apr 10 21:38:09 2012] fullrun_ccd7_acisf10925_pi14-548_cl_pass1_src10_1.ximg exists
[Tue Apr 10 21:38:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10925_pi14-548_cl_pass1_src10.csv
[Tue Apr 10 21:38:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10925_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10925_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:38:14 2012] fullrun_ccd7_acisf10925_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Tue Apr 10 21:38:14 2012] fullrun_ccd7_acisf10925_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Apr 10 21:38:14 2012] Fit fullrun_ccd7_acisf10925_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Apr 10 21:38:26 2012] Spatial fit model total counts = 1186.000000, observed total counts = 1186.000000
[Tue Apr 10 21:38:26 2012] Offset between fit and detection position for source 10 = 0.000906 pixels
[Tue Apr 10 21:38:26 2012] 1185.542000 total counts/ 183.142000 bgd. counts: snr = 74.070808
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.000906 pixels
  Position = (513.7, 841.5) = 9 56 1.31 69 41 11.2
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 1002.4 +/- 34.4
  Background counts = 183.1
  Rate = 0.02 +/- 0.0008
[Tue Apr 10 21:38:26 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:38:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:38:26 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:38:26 2012] Source does appear to be extended
[Tue Apr 10 21:38:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:39:14 2012] Not overwriting source region fullrun_ccd7_acisf10925_pi14-548_pass1_cl_src10_src.reg
[Tue Apr 10 21:39:14 2012] Extracting stamp from image fullrun_ccd7_acisf10925_pi14-548_cl_sm2.00.img.gz, (485, 812) - (543, 871)
[Tue Apr 10 21:39:14 2012] Writing fullrun_ccd7_acisf10925_pi14-548_pass1_cl_src10.gif
[Tue Apr 10 21:39:46 2012] ../../acisf10925/products/events/fullrun_ccd7_acisf10925_pi14-548_pass1_cl_src10_src.evt and ../../acisf10925/products/events/fullrun_ccd7_acisf10925_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue Apr 10 21:39:46 2012] Size of ../../acisf10925/products/events/fullrun_ccd7_acisf10925_pi14-548_pass1_cl_src10_src.evt.gz[events] = 1076 counts
[Tue Apr 10 21:39:46 2012] Mean chipx,y = (449.49, 271.12)
[Tue Apr 10 21:39:46 2012] Mean tdetx,y = (4366.49, 1973.12)
[Tue Apr 10 21:39:46 2012] chipx,y range = (430.00-471.00, 249.00-292.00)
[Tue Apr 10 21:39:46 2012] Size of ../../acisf10925/products/events/fullrun_ccd7_acisf10925_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 442 counts
[Tue Apr 10 21:39:46 2012] ../../acisf10925/products/images/fullrun_ccd7_acisf10925_pi14-548_pass1_cl_src10_src.img and ../../acisf10925/products/images/fullrun_ccd7_acisf10925_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue Apr 10 21:39:46 2012] ../../acisf10925/products/spectra/fullrun_ccd7_acisf10925_pi14-548_pass1_cl_src10_src.pi and ../../acisf10925/products/spectra/fullrun_ccd7_acisf10925_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Tue Apr 10 21:39:49 2012] ../../acisf10925/products/lightcurves/fullrun_ccd7_acisf10925_pi14-548_pass1_cl_src10_src.lc and ../../acisf10925/products/lightcurves/fullrun_ccd7_acisf10925_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue Apr 10 21:41:41 2012] Keeping rmf generated by specextract
[Tue Apr 10 21:41:41 2012] 228.059
[Tue Apr 10 21:41:44 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:41:44 2012] Error reading totcts from fullrun_ccd7_acisf10925_pi14-548_pass1_cl_src10_src.pi.gz
[Tue Apr 10 21:41:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:41:44 2012] Using photon index=1.80, rate=0.0225, arf fullrun_ccd7_acisf10925_pi14-548_pass1_cl_src10.arf
[Tue Apr 10 21:41:44 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 21:41:44 2012] Updating source flux to 1.7e-13