[Tue Apr 10 21:36:13 2012] Detection parameters:
  Position = (318.5, 940.0) = 9 57 22.55 69 35 35.9
  Extent = 0.8" x 0.5", rotation angle = 49 degrees
  Source counts = 77.3 +/- 9.3
  Background counts = 9.7
  Rate = 0.002 +/- 0.0002

[Tue Apr 10 21:36:17 2012] Off-axis axis estimate = 7.54'
[Tue Apr 10 21:37:26 2012] Using EEF radius (= 2.52 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:37:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 21:37:26 2012] Initial guess for spatial extent in simple fitting = 2.52"
[Tue Apr 10 21:37:26 2012] source mask rpix=5.1, npix_max = 126, mask sum = 132, frac = 1.044
[Tue Apr 10 21:37:26 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 2.52"
[Tue Apr 10 21:37:27 2012] fullrun_ccd6_acisf10925_pi14-548_cl_pass0_src2.ximg exists
[Tue Apr 10 21:37:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10925_pi14-548_cl_pass0_src2.csv
[Tue Apr 10 21:37:27 2012] fullrun_ccd6_acisf10925_pi14-548_cl_pass0_src2_1.ximg exists
[Tue Apr 10 21:37:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10925_pi14-548_cl_pass0_src2.csv
[Tue Apr 10 21:37:27 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10925_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10925_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:37:27 2012] fullrun_ccd6_acisf10925_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Tue Apr 10 21:37:27 2012] fullrun_ccd6_acisf10925_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Apr 10 21:37:27 2012] Fit fullrun_ccd6_acisf10925_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Apr 10 21:37:37 2012] Spatial fit model total counts = 204.461000, observed total counts = 205.000000
[Tue Apr 10 21:37:37 2012] Offset between fit and detection position for source 2 = 4.153021 pixels
[Tue Apr 10 21:37:37 2012] Warning, changing simple spatial fit ID from 2 to 1
[Tue Apr 10 21:37:37 2012] 183.105900 total counts/ 18.850900 bgd. counts: snr = 37.831412
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 4.153021 pixels
  Position = (318.8, 944.1) = 9 57 22.57 69 35 37.7
  Extent = 3.1 (2.7-3.5)", rotation angle = 0
  Source counts = 164.3 +/- 13.5
  Background counts = 18.9
  Rate = 0.004 +/- 0.0003
[Tue Apr 10 21:37:37 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:37:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:37:37 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:37:37 2012] Source does appear to be extended
[Tue Apr 10 21:37:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:37:37 2012] Source is confused with source 1
[Tue Apr 10 21:38:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:38:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 21:38:05 2012] Initial guess for spatial extent in simple fitting = 3.11"
[Tue Apr 10 21:38:05 2012] source mask rpix=6.3, npix_max = 186, mask sum = 196, frac = 1.051
[Tue Apr 10 21:38:05 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 3.11"
[Tue Apr 10 21:38:05 2012] fullrun_ccd6_acisf10925_pi14-548_cl_pass1_src2.ximg exists
[Tue Apr 10 21:38:05 2012] fullrun_ccd6_acisf10925_pi14-548_cl_pass1_src2_1.ximg exists
[Tue Apr 10 21:38:05 2012] Fit fullrun_ccd6_acisf10925_pi14-548_cl_pass1_src2 appears to have run properly
[Tue Apr 10 21:38:06 2012] fullrun_ccd6_acisf10925_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Tue Apr 10 21:38:06 2012] fullrun_ccd6_acisf10925_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Apr 10 21:38:06 2012] Fit fullrun_ccd6_acisf10925_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Apr 10 21:38:19 2012] Spatial fit model total counts = 204.888000, observed total counts = 205.000000
[Tue Apr 10 21:38:19 2012] Offset between fit and detection position for source 2 = 2.171880 pixels
[Tue Apr 10 21:38:19 2012] Warning, changing simple spatial fit ID from 2 to 1
[Tue Apr 10 21:38:19 2012] 141.840000 total counts/ 16.216000 bgd. counts: snr = 31.196132
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.171880 pixels
  Position = (318.3, 942.0) = 9 57 22.62 69 35 36.7
  Extent = 2.9 (2.5-3.4)", rotation angle = 0
  Source counts = 125.6 +/- 11.9
  Background counts = 16.2
  Rate = 0.003 +/- 0.0003
[Tue Apr 10 21:38:19 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:38:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:38:19 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 21:38:19 2012] Source does appear to be extended
[Tue Apr 10 21:38:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:38:40 2012] Not overwriting source region fullrun_ccd6_acisf10925_pi14-548_pass1_cl_src2_src.reg
[Tue Apr 10 21:38:40 2012] Extracting stamp from image fullrun_ccd6_acisf10925_pi14-548_cl_sm2.00.img.gz, (187, 811) - (449, 1073)
[Tue Apr 10 21:38:40 2012] Writing fullrun_ccd6_acisf10925_pi14-548_pass1_cl_src2.gif
[Tue Apr 10 21:38:40 2012] ../../acisf10925/products/events/fullrun_ccd6_acisf10925_pi14-548_pass1_cl_src2_src.evt and ../../acisf10925/products/events/fullrun_ccd6_acisf10925_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Apr 10 21:38:40 2012] Size of ../../acisf10925/products/events/fullrun_ccd6_acisf10925_pi14-548_pass1_cl_src2_src.evt.gz[events] = 206 counts
[Tue Apr 10 21:38:40 2012] Mean chipx,y = (415.31, 63.53)
[Tue Apr 10 21:38:40 2012] Mean tdetx,y = (3290.31, 1765.53)
[Tue Apr 10 21:38:40 2012] chipx,y range = (382.00-449.00, 32.00-99.00)
[Tue Apr 10 21:38:40 2012] Size of ../../acisf10925/products/events/fullrun_ccd6_acisf10925_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 269 counts
[Tue Apr 10 21:38:40 2012] ../../acisf10925/products/images/fullrun_ccd6_acisf10925_pi14-548_pass1_cl_src2_src.img and ../../acisf10925/products/images/fullrun_ccd6_acisf10925_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Apr 10 21:38:40 2012] ../../acisf10925/products/spectra/fullrun_ccd6_acisf10925_pi14-548_pass1_cl_src2_src.pi and ../../acisf10925/products/spectra/fullrun_ccd6_acisf10925_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Apr 10 21:38:44 2012] ../../acisf10925/products/lightcurves/fullrun_ccd6_acisf10925_pi14-548_pass1_cl_src2_src.lc and ../../acisf10925/products/lightcurves/fullrun_ccd6_acisf10925_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Apr 10 21:39:13 2012] Keeping rmf generated by specextract
[Tue Apr 10 21:39:13 2012] 175.213
[Tue Apr 10 21:41:43 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:41:43 2012] Error reading totcts from fullrun_ccd6_acisf10925_pi14-548_pass1_cl_src2_src.pi.gz
[Tue Apr 10 21:41:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:41:44 2012] Using photon index=1.80, rate=0.00282, arf fullrun_ccd6_acisf10925_pi14-548_pass1_cl_src2.arf
[Tue Apr 10 21:41:44 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 21:41:44 2012] Updating source flux to 3.6e-14
[Tue Apr 10 21:41:48 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Tue Apr 10 21:41:52 2012] Reading fit data from acisf10925/analysis//spectral/fullrun_ccd6_acisf10925_pi14-548_pass1_cl_src2_pl.csv
[Tue Apr 10 21:41:52 2012] Spectral fit parameter nH value = 2.17998e+21
[Tue Apr 10 21:41:52 2012] Spectral fit parameter PhoIndex value = 1.91042
[Tue Apr 10 21:41:52 2012] Failed to get F(0.3-8.0) from acisf10925/analysis//spectral/fullrun_ccd6_acisf10925_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 21:41:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:41:52 2012] Using Nh = 2.2e+21, photon index=1.91, rate=0.00282, arf fullrun_ccd6_acisf10925_pi14-548_pass1_cl_src2.arf
[Tue Apr 10 21:41:52 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 21:41:52 2012] Updating source flux to 3.4e-14