[Sat Sep 24 15:17:20 2011] Detection parameters:
  Position = (527.3, 1005.1) = 18 20 28.62 68 29 36.8
  Extent = 1.0" x 0.5", rotation angle = 32 degrees
  Source counts = 15.8 +/- 4.1
  Background counts = 1.2
  Rate = 0.0006 +/- 0.0002

[Sat Sep 24 15:17:21 2011] Off-axis axis estimate = 4.49'
[Sat Sep 24 15:18:16 2011] Using EEF radius (= 0.99 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 15:18:16 2011] Initial guess for spatial extent in simple fitting = 0.99"
[Sat Sep 24 15:18:16 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.995
[Sat Sep 24 15:18:16 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.99"
[Sat Sep 24 15:18:17 2011] fullrun_ccd2_acisf10924_pi14-548_cl_pass0_src11.ximg exists
[Sat Sep 24 15:18:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10924_pi14-548_cl_pass0_src11.csv
[Sat Sep 24 15:18:17 2011] fullrun_ccd2_acisf10924_pi14-548_cl_pass0_src11_1.ximg exists
[Sat Sep 24 15:18:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10924_pi14-548_cl_pass0_src11.csv
[Sat Sep 24 15:18:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10924_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10924_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 15:18:17 2011] fullrun_ccd2_acisf10924_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sat Sep 24 15:18:17 2011] fullrun_ccd2_acisf10924_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Sep 24 15:18:17 2011] Fit fullrun_ccd2_acisf10924_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Sep 24 15:18:27 2011] Spatial fit model total counts = 19.620000, observed total counts = 20.000000
[Sat Sep 24 15:18:27 2011] Offset between fit and detection position for source 13 = 0.984378 pixels
[Sat Sep 24 15:18:27 2011] 19.850030 total counts/ 4.080130 bgd. counts: snr = 7.807139
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.984378 pixels
  Position = (528.2, 1005.5) = 18 20 28.59 68 29 36.7
  Extent = 0.9 (0.3-1.4)", rotation angle = 0
  Source counts = 15.8 +/- 4.5
  Background counts = 4.1
  Rate = 0.0006 +/- 0.0002
[Sat Sep 24 15:18:27 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 15:18:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 15:18:27 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 15:18:27 2011] Source does appear to be extended
[Sat Sep 24 15:18:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 15:18:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 15:18:52 2011] Initial guess for spatial extent in simple fitting = 0.95"
[Sat Sep 24 15:18:52 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.059
[Sat Sep 24 15:18:52 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.95"
[Sat Sep 24 15:18:53 2011] fullrun_ccd2_acisf10924_pi14-548_cl_pass1_src11.ximg exists
[Sat Sep 24 15:18:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10924_pi14-548_cl_pass1_src11.csv
[Sat Sep 24 15:18:53 2011] fullrun_ccd2_acisf10924_pi14-548_cl_pass1_src11_1.ximg exists
[Sat Sep 24 15:18:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10924_pi14-548_cl_pass1_src11.csv
[Sat Sep 24 15:18:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10924_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10924_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 15:18:53 2011] fullrun_ccd2_acisf10924_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sat Sep 24 15:18:53 2011] fullrun_ccd2_acisf10924_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Sep 24 15:18:53 2011] Fit fullrun_ccd2_acisf10924_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Sep 24 15:19:02 2011] Spatial fit model total counts = 19.458400, observed total counts = 19.000000
[Sat Sep 24 15:19:02 2011] Offset between fit and detection position for source 13 = 0.077880 pixels
[Sat Sep 24 15:19:02 2011] 19.579170 total counts/ 2.241170 bgd. counts: snr = 11.581414
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.077880 pixels
  Position = (528.2, 1005.6) = 18 20 28.58 68 29 36.8
  Extent = 1.0 (0.7-1.3)", rotation angle = 0
  Source counts = 17.3 +/- 4.4
  Background counts = 2.2
  Rate = 0.0006 +/- 0.0002
[Sat Sep 24 15:19:02 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 15:19:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 15:19:02 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 15:19:02 2011] Source does appear to be extended
[Sat Sep 24 15:19:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 15:20:36 2011] Not overwriting source region fullrun_ccd2_acisf10924_pi14-548_pass1_cl_src13_src.reg
[Sat Sep 24 15:20:36 2011] Extracting stamp from image fullrun_ccd2_acisf10924_pi14-548_cl_sm2.00.img.gz, (484, 962) - (572, 1050)
[Sat Sep 24 15:20:36 2011] Writing fullrun_ccd2_acisf10924_pi14-548_pass1_cl_src13.gif
[Sat Sep 24 15:21:09 2011] ../../acisf10924/products/events/fullrun_ccd2_acisf10924_pi14-548_pass1_cl_src13_src.evt and ../../acisf10924/products/events/fullrun_ccd2_acisf10924_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Sat Sep 24 15:21:09 2011] Size of ../../acisf10924/products/events/fullrun_ccd2_acisf10924_pi14-548_pass1_cl_src13_src.evt.gz[events] = 19 counts
[Sat Sep 24 15:21:09 2011] Mean chipx,y = (62.63, 573.00)
[Sat Sep 24 15:21:09 2011] Mean tdetx,y = (3634.00, 4023.37)
[Sat Sep 24 15:21:09 2011] chipx,y range = (42.00-82.00, 549.00-589.00)
[Sat Sep 24 15:21:09 2011] Size of ../../acisf10924/products/events/fullrun_ccd2_acisf10924_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 35 counts
[Sat Sep 24 15:21:09 2011] ../../acisf10924/products/images/fullrun_ccd2_acisf10924_pi14-548_pass1_cl_src13_src.img and ../../acisf10924/products/images/fullrun_ccd2_acisf10924_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Sat Sep 24 15:21:09 2011] ../../acisf10924/products/spectra/fullrun_ccd2_acisf10924_pi14-548_pass1_cl_src13_src.pi and ../../acisf10924/products/spectra/fullrun_ccd2_acisf10924_pi14-548_pass1_cl_src13_bgd.pi exist, delete to re-create
[Sat Sep 24 15:21:09 2011] Not generating rmf since there are only 17 counts
[Sat Sep 24 15:21:12 2011] ../../acisf10924/products/lightcurves/fullrun_ccd2_acisf10924_pi14-548_pass1_cl_src13_src.lc and ../../acisf10924/products/lightcurves/fullrun_ccd2_acisf10924_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Sat Sep 24 15:22:19 2011] 190.52
[Sat Sep 24 15:24:30 2011] Updating aperture counts using extracted products
[Sat Sep 24 15:24:30 2011] Error reading totcts from fullrun_ccd2_acisf10924_pi14-548_pass1_cl_src13_src.pi.gz
[Sat Sep 24 15:24:31 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 15:24:31 2011] Using photon index=1.80, rate=0.000635, arf fullrun_ccd2_acisf10924_pi14-548_pass1_cl_src13.arf
[Sat Sep 24 15:24:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 15:24:31 2011] Updating source flux to 7.5e-15
[Sat Sep 24 15:24:47 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Sep 24 15:24:48 2011] acisf10924/analysis//spectral/fullrun_ccd2_acisf10924_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete