[Wed Sep 28 06:23:11 2011] Detection parameters:
  Position = (259.4, 709.1) = 7 42 5.88 74 16 31.1
  Extent = 0.8" x 0.5", rotation angle = 86 degrees
  Source counts = 42.6 +/- 6.7
  Background counts = 2.4
  Rate = 0.001 +/- 0.0002

[Wed Sep 28 06:23:12 2011] Off-axis axis estimate = 2.69'
[Wed Sep 28 06:24:10 2011] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 06:24:10 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Wed Sep 28 06:24:10 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.921
[Wed Sep 28 06:24:10 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.52"
[Wed Sep 28 06:24:10 2011] fullrun_ccd3_acisf10922_pi14-548_cl_pass0_src3.ximg exists
[Wed Sep 28 06:24:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10922_pi14-548_cl_pass0_src3.csv
[Wed Sep 28 06:24:10 2011] fullrun_ccd3_acisf10922_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Sep 28 06:24:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10922_pi14-548_cl_pass0_src3.csv
[Wed Sep 28 06:24:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10922_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10922_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 06:24:10 2011] fullrun_ccd3_acisf10922_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Sep 28 06:24:10 2011] fullrun_ccd3_acisf10922_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Sep 28 06:24:10 2011] Fit fullrun_ccd3_acisf10922_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Sep 28 06:24:17 2011] Spatial fit model total counts = 45.989600, observed total counts = 46.000000
[Wed Sep 28 06:24:17 2011] Offset between fit and detection position for source 1 = 0.988246 pixels
[Wed Sep 28 06:24:17 2011] 46.258700 total counts/ 10.361100 bgd. counts: snr = 11.152250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.988246 pixels
  Position = (259.8, 710.1) = 7 42 5.89 74 16 31.3
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 35.9 +/- 6.8
  Background counts = 10.4
  Rate = 0.001 +/- 0.0002
[Wed Sep 28 06:24:17 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 06:24:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 06:24:17 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 06:24:17 2011] Source does appear to be extended
[Wed Sep 28 06:24:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 06:24:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 06:24:39 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Wed Sep 28 06:24:39 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.949
[Wed Sep 28 06:24:39 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.51"
[Wed Sep 28 06:24:40 2011] fullrun_ccd3_acisf10922_pi14-548_cl_pass1_src3.ximg exists
[Wed Sep 28 06:24:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10922_pi14-548_cl_pass1_src3.csv
[Wed Sep 28 06:24:40 2011] fullrun_ccd3_acisf10922_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Sep 28 06:24:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10922_pi14-548_cl_pass1_src3.csv
[Wed Sep 28 06:24:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10922_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10922_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 06:24:40 2011] fullrun_ccd3_acisf10922_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Sep 28 06:24:40 2011] fullrun_ccd3_acisf10922_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Sep 28 06:24:40 2011] Fit fullrun_ccd3_acisf10922_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Sep 28 06:24:48 2011] Spatial fit model total counts = 45.927500, observed total counts = 46.000000
[Wed Sep 28 06:24:48 2011] Offset between fit and detection position for source 1 = 0.048645 pixels
[Wed Sep 28 06:24:48 2011] 45.374250 total counts/ 8.905250 bgd. counts: snr = 12.220833
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.048645 pixels
  Position = (259.8, 710.1) = 7 42 5.89 74 16 31.4
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 36.5 +/- 6.7
  Background counts = 8.9
  Rate = 0.001 +/- 0.0002
[Wed Sep 28 06:24:48 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 06:24:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 06:24:48 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 06:24:48 2011] Source does appear to be extended
[Wed Sep 28 06:24:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 06:26:30 2011] Not overwriting source region fullrun_ccd3_acisf10922_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 28 06:26:30 2011] Extracting stamp from image fullrun_ccd3_acisf10922_pi14-548_cl_sm2.00.img.gz, (236, 686) - (284, 734)
[Wed Sep 28 06:26:30 2011] Writing fullrun_ccd3_acisf10922_pi14-548_pass1_cl_src1.gif
[Wed Sep 28 06:26:38 2011] ../../acisf10922/products/events/fullrun_ccd3_acisf10922_pi14-548_pass1_cl_src1_src.evt and ../../acisf10922/products/events/fullrun_ccd3_acisf10922_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 28 06:26:38 2011] Size of ../../acisf10922/products/events/fullrun_ccd3_acisf10922_pi14-548_pass1_cl_src1_src.evt.gz[events] = 41 counts
[Wed Sep 28 06:26:38 2011] Mean chipx,y = (314.15, 881.68)
[Wed Sep 28 06:26:38 2011] Mean tdetx,y = (4250.32, 3375.15)
[Wed Sep 28 06:26:38 2011] chipx,y range = (297.00-335.00, 864.00-900.00)
[Wed Sep 28 06:26:38 2011] Size of ../../acisf10922/products/events/fullrun_ccd3_acisf10922_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 12 counts
[Wed Sep 28 06:26:38 2011] ../../acisf10922/products/images/fullrun_ccd3_acisf10922_pi14-548_pass1_cl_src1_src.img and ../../acisf10922/products/images/fullrun_ccd3_acisf10922_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 28 06:26:38 2011] ../../acisf10922/products/spectra/fullrun_ccd3_acisf10922_pi14-548_pass1_cl_src1_src.pi and ../../acisf10922/products/spectra/fullrun_ccd3_acisf10922_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 28 06:26:38 2011] Not generating rmf since there are only 36 counts
[Wed Sep 28 06:26:41 2011] ../../acisf10922/products/lightcurves/fullrun_ccd3_acisf10922_pi14-548_pass1_cl_src1_src.lc and ../../acisf10922/products/lightcurves/fullrun_ccd3_acisf10922_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 28 06:26:47 2011] 192.19
[Wed Sep 28 06:26:50 2011] Updating aperture counts using extracted products
[Wed Sep 28 06:26:50 2011] Error reading totcts from fullrun_ccd3_acisf10922_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 28 06:26:50 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 06:26:50 2011] Using photon index=1.80, rate=0.00103, arf fullrun_ccd3_acisf10922_pi14-548_pass1_cl_src1.arf
[Wed Sep 28 06:26:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 06:26:50 2011] Updating source flux to 1.3e-14
[Wed Sep 28 06:26:58 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting