[Fri Oct 28 01:38:16 2011] Detection parameters:
  Position = (580.7, 505.8) = 7 43 25.58 74 10 9.3
  Extent = 2.1" x 1.2", rotation angle = 87 degrees
  Source counts = 136.9 +/- 12.3
  Background counts = 14.1
  Rate = 0.002 +/- 0.0002

[Fri Oct 28 01:38:16 2011] Off-axis axis estimate = 6.52'
[Fri Oct 28 01:39:27 2011] Using EEF radius (= 1.90 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 01:39:27 2011] Initial guess for spatial extent in simple fitting = 1.90"
[Fri Oct 28 01:39:27 2011] source mask rpix=3.9, npix_max = 76, mask sum = 81, frac = 1.063
[Fri Oct 28 01:39:27 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.90"
[Fri Oct 28 01:39:28 2011] fullrun_ccd2_acisf10918_pi14-548_cl_pass0_src2.ximg exists
[Fri Oct 28 01:39:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10918_pi14-548_cl_pass0_src2.csv
[Fri Oct 28 01:39:28 2011] fullrun_ccd2_acisf10918_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Oct 28 01:39:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10918_pi14-548_cl_pass0_src2.csv
[Fri Oct 28 01:39:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10918_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10918_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 01:39:28 2011] fullrun_ccd2_acisf10918_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Oct 28 01:39:28 2011] fullrun_ccd2_acisf10918_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Oct 28 01:39:28 2011] Fit fullrun_ccd2_acisf10918_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Oct 28 01:39:38 2011] Spatial fit model total counts = 144.505000, observed total counts = 145.000000
[Fri Oct 28 01:39:38 2011] Offset between fit and detection position for source 16 = 1.089187 pixels
[Fri Oct 28 01:39:38 2011] 145.778900 total counts/ 43.165900 bgd. counts: snr = 15.618236
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.089187 pixels
  Position = (580.8, 506.9) = 7 43 25.63 74 10 9.6
  Extent = 1.3 (1.1-1.7)", rotation angle = 0
  Source counts = 102.6 +/- 12.1
  Background counts = 43.2
  Rate = 0.002 +/- 0.0002
[Fri Oct 28 01:39:38 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 01:39:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 01:39:38 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 01:39:38 2011] Source does appear to be extended
[Fri Oct 28 01:39:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 01:39:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 01:39:59 2011] Initial guess for spatial extent in simple fitting = 1.34"
[Fri Oct 28 01:39:59 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.868
[Fri Oct 28 01:39:59 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.34"
[Fri Oct 28 01:39:59 2011] fullrun_ccd2_acisf10918_pi14-548_cl_pass1_src2.ximg exists
[Fri Oct 28 01:39:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10918_pi14-548_cl_pass1_src2.csv
[Fri Oct 28 01:39:59 2011] fullrun_ccd2_acisf10918_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Oct 28 01:39:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf10918_pi14-548_cl_pass1_src2.csv
[Fri Oct 28 01:39:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf10918_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf10918_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 01:39:59 2011] fullrun_ccd2_acisf10918_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Oct 28 01:39:59 2011] fullrun_ccd2_acisf10918_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Oct 28 01:39:59 2011] Fit fullrun_ccd2_acisf10918_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Oct 28 01:40:08 2011] Spatial fit model total counts = 125.342000, observed total counts = 126.000000
[Fri Oct 28 01:40:08 2011] Offset between fit and detection position for source 16 = 0.251639 pixels
[Fri Oct 28 01:40:08 2011] 125.146100 total counts/ 34.338000 bgd. counts: snr = 15.496624
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.251639 pixels
  Position = (581.0, 507.1) = 7 43 25.60 74 10 9.7
  Extent = 1.2 (1.0-1.5)", rotation angle = 0
  Source counts = 90.8 +/- 11.2
  Background counts = 34.3
  Rate = 0.001 +/- 0.0002
[Fri Oct 28 01:40:08 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 01:40:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 01:40:08 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 01:40:08 2011] Source does appear to be extended
[Fri Oct 28 01:40:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 01:41:31 2011] Not overwriting source region fullrun_ccd2_acisf10918_pi14-548_pass1_cl_src16_src.reg
[Fri Oct 28 01:41:31 2011] Extracting stamp from image fullrun_ccd2_acisf10918_pi14-548_cl_sm2.00.img.gz, (526, 453) - (635, 562)
[Fri Oct 28 01:41:31 2011] Writing fullrun_ccd2_acisf10918_pi14-548_pass1_cl_src16.gif
[Fri Oct 28 01:41:34 2011] ../../acisf10918/products/events/fullrun_ccd2_acisf10918_pi14-548_pass1_cl_src16_src.evt and ../../acisf10918/products/events/fullrun_ccd2_acisf10918_pi14-548_pass1_cl_src16_bgd.evt exist, delete to re-create
[Fri Oct 28 01:41:34 2011] Size of ../../acisf10918/products/events/fullrun_ccd2_acisf10918_pi14-548_pass1_cl_src16_src.evt.gz[events] = 129 counts
[Fri Oct 28 01:41:34 2011] Mean chipx,y = (420.36, 260.40)
[Fri Oct 28 01:41:34 2011] Mean tdetx,y = (3321.40, 3665.64)
[Fri Oct 28 01:41:34 2011] chipx,y range = (400.00-445.00, 241.00-283.00)
[Fri Oct 28 01:41:35 2011] Size of ../../acisf10918/products/events/fullrun_ccd2_acisf10918_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 63 counts
[Fri Oct 28 01:41:35 2011] ../../acisf10918/products/images/fullrun_ccd2_acisf10918_pi14-548_pass1_cl_src16_src.img and ../../acisf10918/products/images/fullrun_ccd2_acisf10918_pi14-548_pass1_cl_src16_bgd.img exist, delete to re-create
[Fri Oct 28 01:41:35 2011] ../../acisf10918/products/spectra/fullrun_ccd2_acisf10918_pi14-548_pass1_cl_src16_src.pi and ../../acisf10918/products/spectra/fullrun_ccd2_acisf10918_pi14-548_pass1_cl_src16_bgd.pi exist, delete to re-create
[Fri Oct 28 01:41:35 2011] Not generating rmf since there are only 90 counts
[Fri Oct 28 01:41:37 2011] ../../acisf10918/products/lightcurves/fullrun_ccd2_acisf10918_pi14-548_pass1_cl_src16_src.lc and ../../acisf10918/products/lightcurves/fullrun_ccd2_acisf10918_pi14-548_pass1_cl_src16_bgd.lc exist, delete to re-create
[Fri Oct 28 01:42:11 2011] 167.433
[Fri Oct 28 01:42:49 2011] Updating aperture counts using extracted products
[Fri Oct 28 01:42:49 2011] Error reading totcts from fullrun_ccd2_acisf10918_pi14-548_pass1_cl_src16_src.pi.gz
[Fri Oct 28 01:42:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 01:42:49 2011] Using photon index=1.80, rate=0.00139, arf fullrun_ccd2_acisf10918_pi14-548_pass1_cl_src16.arf
[Fri Oct 28 01:42:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 01:42:49 2011] Updating source flux to 1.9e-14
[Fri Oct 28 01:42:54 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting