[Wed Oct 19 17:14:54 2011] Detection parameters:
  Position = (821.7, 1075.5) = 15 16 44.52 7 5 15.2
  Extent = 0.9" x 0.6", rotation angle = 61 degrees
  Source counts = 216.1 +/- 15.1
  Background counts = 11.9
  Rate = 0.01 +/- 0.001

[Wed Oct 19 17:14:55 2011] Off-axis axis estimate = 4.83'
[Wed Oct 19 17:15:49 2011] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 17:15:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 17:15:49 2011] Initial guess for spatial extent in simple fitting = 1.11"
[Wed Oct 19 17:15:49 2011] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.821
[Wed Oct 19 17:15:49 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.11"
[Wed Oct 19 17:15:50 2011] fullrun_ccd7_acisf10915_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 19 17:15:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10915_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 17:15:50 2011] fullrun_ccd7_acisf10915_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 19 17:15:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10915_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 17:15:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10915_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10915_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 17:15:50 2011] fullrun_ccd7_acisf10915_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 19 17:15:50 2011] fullrun_ccd7_acisf10915_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 19 17:15:50 2011] Fit fullrun_ccd7_acisf10915_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 19 17:15:55 2011] Spatial fit model total counts = 228.999000, observed total counts = 229.000000
[Wed Oct 19 17:15:55 2011] Offset between fit and detection position for source 3 = 0.787513 pixels
[Wed Oct 19 17:15:55 2011] 229.393400 total counts/ 12.512400 bgd. counts: snr = 61.312807
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.787513 pixels
  Position = (822.2, 1076.1) = 15 16 44.52 7 5 15.2
  Extent = 1.2 (1.1-1.4)", rotation angle = 0
  Source counts = 216.9 +/- 15.1
  Background counts = 12.5
  Rate = 0.01 +/- 0.001
[Wed Oct 19 17:15:55 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 17:15:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 17:15:55 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 17:15:55 2011] Source does appear to be extended
[Wed Oct 19 17:15:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 17:16:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 17:16:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 17:16:06 2011] Initial guess for spatial extent in simple fitting = 1.23"
[Wed Oct 19 17:16:06 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Wed Oct 19 17:16:06 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.23"
[Wed Oct 19 17:16:06 2011] fullrun_ccd7_acisf10915_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 19 17:16:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10915_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 17:16:06 2011] fullrun_ccd7_acisf10915_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 19 17:16:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10915_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 17:16:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10915_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10915_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 17:16:06 2011] fullrun_ccd7_acisf10915_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 19 17:16:06 2011] fullrun_ccd7_acisf10915_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 19 17:16:06 2011] Fit fullrun_ccd7_acisf10915_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 19 17:16:10 2011] Spatial fit model total counts = 235.270000, observed total counts = 236.000000
[Wed Oct 19 17:16:10 2011] Offset between fit and detection position for source 3 = 0.018924 pixels
[Wed Oct 19 17:16:10 2011] 235.852400 total counts/ 18.959400 bgd. counts: snr = 49.811915
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.018924 pixels
  Position = (822.2, 1076.1) = 15 16 44.52 7 5 15.3
  Extent = 1.2 (1.1-1.4)", rotation angle = 0
  Source counts = 216.9 +/- 15.4
  Background counts = 19.0
  Rate = 0.01 +/- 0.001
[Wed Oct 19 17:16:10 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 17:16:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 17:16:10 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 17:16:10 2011] Source does appear to be extended
[Wed Oct 19 17:16:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 17:16:47 2011] Not overwriting source region fullrun_ccd7_acisf10915_pi14-548_pass1_cl_src3_src.reg
[Wed Oct 19 17:16:47 2011] Extracting stamp from image fullrun_ccd7_acisf10915_pi14-548_cl_sm2.00.img.gz, (765, 1019) - (879, 1133)
[Wed Oct 19 17:16:47 2011] Writing fullrun_ccd7_acisf10915_pi14-548_pass1_cl_src3.gif
[Wed Oct 19 17:16:48 2011] ../../acisf10915/products/events/fullrun_ccd7_acisf10915_pi14-548_pass1_cl_src3_src.evt and ../../acisf10915/products/events/fullrun_ccd7_acisf10915_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Oct 19 17:16:48 2011] Size of ../../acisf10915/products/events/fullrun_ccd7_acisf10915_pi14-548_pass1_cl_src3_src.evt.gz[events] = 236 counts
[Wed Oct 19 17:16:48 2011] Mean chipx,y = (662.86, 854.00)
[Wed Oct 19 17:16:48 2011] Mean tdetx,y = (4579.86, 2556.00)
[Wed Oct 19 17:16:48 2011] chipx,y range = (638.00-683.00, 834.00-878.00)
[Wed Oct 19 17:16:48 2011] Size of ../../acisf10915/products/events/fullrun_ccd7_acisf10915_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 164 counts
[Wed Oct 19 17:16:48 2011] ../../acisf10915/products/images/fullrun_ccd7_acisf10915_pi14-548_pass1_cl_src3_src.img and ../../acisf10915/products/images/fullrun_ccd7_acisf10915_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Oct 19 17:16:48 2011] ../../acisf10915/products/spectra/fullrun_ccd7_acisf10915_pi14-548_pass1_cl_src3_src.pi and ../../acisf10915/products/spectra/fullrun_ccd7_acisf10915_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Oct 19 17:16:51 2011] ../../acisf10915/products/lightcurves/fullrun_ccd7_acisf10915_pi14-548_pass1_cl_src3_src.lc and ../../acisf10915/products/lightcurves/fullrun_ccd7_acisf10915_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Oct 19 17:17:16 2011] Keeping rmf generated by specextract
[Wed Oct 19 17:17:16 2011] 218.733
[Wed Oct 19 17:17:18 2011] Updating aperture counts using extracted products
[Wed Oct 19 17:17:18 2011] Error reading totcts from fullrun_ccd7_acisf10915_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Oct 19 17:17:18 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 17:17:18 2011] Using photon index=1.80, rate=0.0145, arf fullrun_ccd7_acisf10915_pi14-548_pass1_cl_src3.arf
[Wed Oct 19 17:17:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 17:17:18 2011] Updating source flux to 1.2e-13
[Wed Oct 19 17:17:32 2011] Reading fit data from acisf10915/analysis//spectral/fullrun_ccd7_acisf10915_pi14-548_pass1_cl_src3_pl.csv
[Wed Oct 19 17:17:32 2011] Spectral fit parameter nH value = 585163000000.0
[Wed Oct 19 17:17:32 2011] Spectral fit parameter PhoIndex value = 1.72016
[Wed Oct 19 17:17:32 2011] Failed to get F(0.3-8.0) from acisf10915/analysis//spectral/fullrun_ccd7_acisf10915_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Oct 19 17:17:32 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 17:17:32 2011] Using Nh = 5.9e+11, photon index=1.72, rate=0.0145, arf fullrun_ccd7_acisf10915_pi14-548_pass1_cl_src3.arf
[Wed Oct 19 17:17:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 17:17:32 2011] Updating source flux to 1.2e-13