[Sun Oct 16 09:19:13 2011] Detection parameters:
  Position = (491.0, 953.1) = 9 55 42.35 18 13 40.2
  Extent = 1.0" x 0.6", rotation angle = 89 degrees
  Source counts = 18.9 +/- 4.7
  Background counts = 3.1
  Rate = 0.0005 +/- 0.0001

[Sun Oct 16 09:19:13 2011] Off-axis axis estimate = 5.42'
[Sun Oct 16 09:20:02 2011] Using EEF radius (= 1.36 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 09:20:02 2011] Initial guess for spatial extent in simple fitting = 1.36"
[Sun Oct 16 09:20:02 2011] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.849
[Sun Oct 16 09:20:02 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 1.36"
[Sun Oct 16 09:20:03 2011] fullrun_ccd7_acisf10912_pi14-548_cl_pass0_src13.ximg exists
[Sun Oct 16 09:20:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10912_pi14-548_cl_pass0_src13.csv
[Sun Oct 16 09:20:03 2011] fullrun_ccd7_acisf10912_pi14-548_cl_pass0_src13_1.ximg exists
[Sun Oct 16 09:20:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10912_pi14-548_cl_pass0_src13.csv
[Sun Oct 16 09:20:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10912_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10912_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:20:03 2011] fullrun_ccd7_acisf10912_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sun Oct 16 09:20:03 2011] fullrun_ccd7_acisf10912_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Oct 16 09:20:03 2011] Fit fullrun_ccd7_acisf10912_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Oct 16 09:20:12 2011] Spatial fit model total counts = 33.295000, observed total counts = 34.000000
[Sun Oct 16 09:20:12 2011] Offset between fit and detection position for source 20 = 0.922465 pixels
[Sun Oct 16 09:20:12 2011] 35.186200 total counts/ 19.258700 bgd. counts: snr = 3.629394
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.922465 pixels
  Position = (491.9, 953.0) = 9 55 42.34 18 13 39.9
  Extent = 1.0 (0.4-1.5)", rotation angle = 0
  Source counts = 15.9 +/- 5.9
  Background counts = 19.3
  Rate = 0.0004 +/- 0.0002
[Sun Oct 16 09:20:12 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 09:20:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 09:20:12 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 09:20:12 2011] Source does appear to be extended
[Sun Oct 16 09:20:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 09:20:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 09:20:30 2011] Initial guess for spatial extent in simple fitting = 1.03"
[Sun Oct 16 09:20:30 2011] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.123
[Sun Oct 16 09:20:30 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 1.03"
[Sun Oct 16 09:20:31 2011] fullrun_ccd7_acisf10912_pi14-548_cl_pass1_src13.ximg exists
[Sun Oct 16 09:20:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10912_pi14-548_cl_pass1_src13.csv
[Sun Oct 16 09:20:31 2011] fullrun_ccd7_acisf10912_pi14-548_cl_pass1_src13_1.ximg exists
[Sun Oct 16 09:20:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf10912_pi14-548_cl_pass1_src13.csv
[Sun Oct 16 09:20:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf10912_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf10912_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:20:31 2011] fullrun_ccd7_acisf10912_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sun Oct 16 09:20:31 2011] fullrun_ccd7_acisf10912_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Oct 16 09:20:31 2011] Fit fullrun_ccd7_acisf10912_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Sun Oct 16 09:20:40 2011] Spatial fit model total counts = 31.024300, observed total counts = 32.000000
[Sun Oct 16 09:20:40 2011] Offset between fit and detection position for source 20 = 0.288119 pixels
[Sun Oct 16 09:20:40 2011] 32.810300 total counts/ 13.379400 bgd. counts: snr = 5.312202
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.288119 pixels
  Position = (491.8, 953.2) = 9 55 42.34 18 13 40.0
  Extent = 1.1 (0.6-2.0)", rotation angle = 0
  Source counts = 19.4 +/- 5.7
  Background counts = 13.4
  Rate = 0.0005 +/- 0.0002
[Sun Oct 16 09:20:40 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 09:20:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 09:20:40 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 09:20:40 2011] Source does appear to be extended
[Sun Oct 16 09:20:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 09:22:22 2011] Not overwriting source region fullrun_ccd7_acisf10912_pi14-548_pass1_cl_src20_src.reg
[Sun Oct 16 09:22:22 2011] Extracting stamp from image fullrun_ccd7_acisf10912_pi14-548_cl_sm2.00.img.gz, (440, 901) - (544, 1006)
[Sun Oct 16 09:22:22 2011] Writing fullrun_ccd7_acisf10912_pi14-548_pass1_cl_src20.gif
[Sun Oct 16 09:23:01 2011] ../../acisf10912/products/events/fullrun_ccd7_acisf10912_pi14-548_pass1_cl_src20_src.evt and ../../acisf10912/products/events/fullrun_ccd7_acisf10912_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Sun Oct 16 09:23:01 2011] Size of ../../acisf10912/products/events/fullrun_ccd7_acisf10912_pi14-548_pass1_cl_src20_src.evt.gz[events] = 34 counts
[Sun Oct 16 09:23:01 2011] Mean chipx,y = (852.88, 454.29)
[Sun Oct 16 09:23:01 2011] Mean tdetx,y = (4769.88, 2156.29)
[Sun Oct 16 09:23:01 2011] chipx,y range = (830.00-877.00, 434.00-477.00)
[Sun Oct 16 09:23:01 2011] Size of ../../acisf10912/products/events/fullrun_ccd7_acisf10912_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 102 counts
[Sun Oct 16 09:23:01 2011] ../../acisf10912/products/images/fullrun_ccd7_acisf10912_pi14-548_pass1_cl_src20_src.img and ../../acisf10912/products/images/fullrun_ccd7_acisf10912_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Sun Oct 16 09:23:01 2011] ../../acisf10912/products/spectra/fullrun_ccd7_acisf10912_pi14-548_pass1_cl_src20_src.pi and ../../acisf10912/products/spectra/fullrun_ccd7_acisf10912_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Sun Oct 16 09:23:01 2011] Not generating rmf since there are only 19 counts
[Sun Oct 16 09:23:04 2011] ../../acisf10912/products/lightcurves/fullrun_ccd7_acisf10912_pi14-548_pass1_cl_src20_src.lc and ../../acisf10912/products/lightcurves/fullrun_ccd7_acisf10912_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Sun Oct 16 09:23:29 2011] 217.808
[Sun Oct 16 09:23:32 2011] Updating aperture counts using extracted products
[Sun Oct 16 09:23:32 2011] Error reading totcts from fullrun_ccd7_acisf10912_pi14-548_pass1_cl_src20_src.pi.gz
[Sun Oct 16 09:23:32 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 09:23:32 2011] Using photon index=1.80, rate=0.000543, arf fullrun_ccd7_acisf10912_pi14-548_pass1_cl_src20.arf
[Sun Oct 16 09:23:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 09:23:32 2011] Updating source flux to 4.3e-15
[Sun Oct 16 09:23:44 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting