[Sun Oct 16 09:19:12 2011] Detection parameters:
  Position = (1015.0, 904.0) = 9 55 12.16 18 5 11.3
  Extent = 2.5" x 1.6", rotation angle = 12 degrees
  Source counts = 52.5 +/- 7.9
  Background counts = 9.5
  Rate = 0.001 +/- 0.0002

[Sun Oct 16 09:19:12 2011] Off-axis axis estimate = 6.15'
[Sun Oct 16 09:20:01 2011] Using EEF radius (= 1.70 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 09:20:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 16 09:20:01 2011] Initial guess for spatial extent in simple fitting = 1.70"
[Sun Oct 16 09:20:01 2011] source mask rpix=3.5, npix_max = 62, mask sum = 64, frac = 1.018
[Sun Oct 16 09:20:01 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 1.70"
[Sun Oct 16 09:20:01 2011] fullrun_ccd6_acisf10912_pi14-548_cl_pass0_src4.ximg exists
[Sun Oct 16 09:20:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10912_pi14-548_cl_pass0_src4.csv
[Sun Oct 16 09:20:01 2011] fullrun_ccd6_acisf10912_pi14-548_cl_pass0_src4_1.ximg exists
[Sun Oct 16 09:20:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10912_pi14-548_cl_pass0_src4.csv
[Sun Oct 16 09:20:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10912_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10912_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:20:02 2011] fullrun_ccd6_acisf10912_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Sun Oct 16 09:20:02 2011] fullrun_ccd6_acisf10912_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Oct 16 09:20:02 2011] Fit fullrun_ccd6_acisf10912_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Oct 16 09:20:09 2011] Spatial fit model total counts = 53.943300, observed total counts = 54.000000
[Sun Oct 16 09:20:09 2011] Offset between fit and detection position for source 11 = 0.463328 pixels
[Sun Oct 16 09:20:09 2011] 53.664220 total counts/ 9.288720 bgd. counts: snr = 14.560132
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.463328 pixels
  Position = (1015.4, 904.1) = 9 55 12.16 18 5 11.1
  Extent = 2.1 (1.4-3.1)", rotation angle = 0
  Source counts = 44.4 +/- 7.3
  Background counts = 9.3
  Rate = 0.001 +/- 0.0002
[Sun Oct 16 09:20:09 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 09:20:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 09:20:09 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 09:20:09 2011] Source does appear to be extended
[Sun Oct 16 09:20:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 09:20:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 09:20:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 16 09:20:29 2011] Initial guess for spatial extent in simple fitting = 2.09"
[Sun Oct 16 09:20:29 2011] source mask rpix=4.2, npix_max = 90, mask sum = 90, frac = 0.998
[Sun Oct 16 09:20:29 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 2.09"
[Sun Oct 16 09:20:30 2011] fullrun_ccd6_acisf10912_pi14-548_cl_pass1_src4.ximg exists
[Sun Oct 16 09:20:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10912_pi14-548_cl_pass1_src4.csv
[Sun Oct 16 09:20:30 2011] fullrun_ccd6_acisf10912_pi14-548_cl_pass1_src4_1.ximg exists
[Sun Oct 16 09:20:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10912_pi14-548_cl_pass1_src4.csv
[Sun Oct 16 09:20:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10912_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10912_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 09:20:30 2011] fullrun_ccd6_acisf10912_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sun Oct 16 09:20:30 2011] fullrun_ccd6_acisf10912_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Oct 16 09:20:30 2011] Fit fullrun_ccd6_acisf10912_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Oct 16 09:20:37 2011] Spatial fit model total counts = 57.709600, observed total counts = 58.000000
[Sun Oct 16 09:20:37 2011] Offset between fit and detection position for source 11 = 1.394614 pixels
[Sun Oct 16 09:20:37 2011] 58.043930 total counts/ 1.200830 bgd. counts: snr = 51.872477
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.394614 pixels
  Position = (1014.1, 904.4) = 9 55 12.21 18 5 11.3
  Extent = 2.5 (1.8-3.0)", rotation angle = 0
  Source counts = 56.8 +/- 7.6
  Background counts = 1.2
  Rate = 0.002 +/- 0.0002
[Sun Oct 16 09:20:37 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 09:20:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 09:20:37 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 09:20:37 2011] Source does appear to be extended
[Sun Oct 16 09:20:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 09:21:30 2011] Not overwriting source region fullrun_ccd6_acisf10912_pi14-548_pass1_cl_src11_src.reg
[Sun Oct 16 09:21:30 2011] Extracting stamp from image fullrun_ccd6_acisf10912_pi14-548_cl_sm2.00.img.gz, (901, 791) - (1127, 1017)
[Sun Oct 16 09:21:30 2011] Writing fullrun_ccd6_acisf10912_pi14-548_pass1_cl_src11.gif
[Sun Oct 16 09:21:41 2011] ../../acisf10912/products/events/fullrun_ccd6_acisf10912_pi14-548_pass1_cl_src11_src.evt and ../../acisf10912/products/events/fullrun_ccd6_acisf10912_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sun Oct 16 09:21:41 2011] Size of ../../acisf10912/products/events/fullrun_ccd6_acisf10912_pi14-548_pass1_cl_src11_src.evt.gz[events] = 66 counts
[Sun Oct 16 09:21:41 2011] Mean chipx,y = (636.83, 950.92)
[Sun Oct 16 09:21:41 2011] Mean tdetx,y = (3511.83, 2652.92)
[Sun Oct 16 09:21:41 2011] chipx,y range = (613.00-663.00, 927.00-980.00)
[Sun Oct 16 09:21:41 2011] Size of ../../acisf10912/products/events/fullrun_ccd6_acisf10912_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 199 counts
[Sun Oct 16 09:21:41 2011] ../../acisf10912/products/images/fullrun_ccd6_acisf10912_pi14-548_pass1_cl_src11_src.img and ../../acisf10912/products/images/fullrun_ccd6_acisf10912_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Sun Oct 16 09:21:41 2011] ../../acisf10912/products/spectra/fullrun_ccd6_acisf10912_pi14-548_pass1_cl_src11_src.pi and ../../acisf10912/products/spectra/fullrun_ccd6_acisf10912_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Sun Oct 16 09:21:41 2011] Not generating rmf since there are only 56 counts
[Sun Oct 16 09:21:44 2011] ../../acisf10912/products/lightcurves/fullrun_ccd6_acisf10912_pi14-548_pass1_cl_src11_src.lc and ../../acisf10912/products/lightcurves/fullrun_ccd6_acisf10912_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sun Oct 16 09:22:22 2011] 182.753
[Sun Oct 16 09:23:31 2011] Updating aperture counts using extracted products
[Sun Oct 16 09:23:31 2011] Error reading totcts from fullrun_ccd6_acisf10912_pi14-548_pass1_cl_src11_src.pi.gz
[Sun Oct 16 09:23:31 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 09:23:31 2011] Using photon index=1.80, rate=0.00159, arf fullrun_ccd6_acisf10912_pi14-548_pass1_cl_src11.arf
[Sun Oct 16 09:23:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 09:23:31 2011] Updating source flux to 2e-14
[Sun Oct 16 09:23:37 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting