[Sun Oct 30 07:13:01 2011] Detection parameters:
  Position = (159.1, 767.3) = 9 55 42.29 18 4 7.6
  Extent = 0.9" x 0.8", rotation angle = 139 degrees
  Source counts = 102.9 +/- 10.3
  Background counts = 4.1
  Rate = 0.002 +/- 0.0002

[Sun Oct 30 07:13:02 2011] Off-axis axis estimate = 5.02'
[Sun Oct 30 07:14:06 2011] Using EEF radius (= 1.19 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 07:14:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 07:14:06 2011] Initial guess for spatial extent in simple fitting = 1.19"
[Sun Oct 30 07:14:06 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.061
[Sun Oct 30 07:14:06 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.19"
[Sun Oct 30 07:14:09 2011] fullrun_ccd6_acisf10910_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct 30 07:14:09 2011] fullrun_ccd6_acisf10910_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct 30 07:14:09 2011] Fit fullrun_ccd6_acisf10910_pi14-548_cl_pass0_src3 appears to have run properly
[Sun Oct 30 07:14:09 2011] fullrun_ccd6_acisf10910_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct 30 07:14:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10910_pi14-548_cl_pass0_tfrozen_src3.csv
[Sun Oct 30 07:14:09 2011] fullrun_ccd6_acisf10910_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct 30 07:14:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10910_pi14-548_cl_pass0_tfrozen_src3.csv
[Sun Oct 30 07:14:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10910_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10910_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 07:14:18 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.808361 pixels away
[Sun Oct 30 07:14:18 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 07:14:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 07:14:18 2011] Assessing source extent using major
[Sun Oct 30 07:14:18 2011] Source does appear to be extended
[Sun Oct 30 07:14:18 2011] Computing asymmetry using major and minor axis, asym = 1.03
[Sun Oct 30 07:14:18 2011] Source is confused with source 5
[Sun Oct 30 07:14:39 2011] Using EEF radius (= 1.19 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 07:14:39 2011] Initial guess for spatial extent in simple fitting = 1.19"
[Sun Oct 30 07:14:39 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.061
[Sun Oct 30 07:14:39 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.19"
[Sun Oct 30 07:14:39 2011] fullrun_ccd6_acisf10910_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct 30 07:14:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10910_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 07:14:39 2011] fullrun_ccd6_acisf10910_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct 30 07:14:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10910_pi14-548_cl_pass1_src3.csv
[Sun Oct 30 07:14:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10910_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10910_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 07:14:39 2011] fullrun_ccd6_acisf10910_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct 30 07:14:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10910_pi14-548_cl_pass1_tfrozen_src3.csv
[Sun Oct 30 07:14:40 2011] fullrun_ccd6_acisf10910_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct 30 07:14:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10910_pi14-548_cl_pass1_tfrozen_src3.csv
[Sun Oct 30 07:14:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10910_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10910_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 07:14:48 2011] Spatial fit model total counts = 132.798000, observed total counts = 164.000000
[Sun Oct 30 07:14:48 2011] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Oct 30 07:14:48 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 07:14:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 07:14:48 2011] Assessing source extent using major
[Sun Oct 30 07:14:48 2011] Source does appear to be extended
[Sun Oct 30 07:14:48 2011] Computing asymmetry using major and minor axis, asym = 1.03
[Sun Oct 30 07:19:23 2011] Not overwriting source region fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src3_src.reg
[Sun Oct 30 07:19:23 2011] Extracting stamp from image fullrun_ccd6_acisf10910_pi14-548_cl_sm2.00.img.gz, (119, 727) - (199, 807)
[Sun Oct 30 07:19:23 2011] Writing fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src3.gif
[Sun Oct 30 07:20:27 2011] ../../acisf10910/products/events/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src3_src.evt and ../../acisf10910/products/events/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Oct 30 07:20:27 2011] Size of ../../acisf10910/products/events/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src3_src.evt.gz[events] = 146 counts
[Sun Oct 30 07:20:27 2011] Mean chipx,y = (782.05, 83.73)
[Sun Oct 30 07:20:27 2011] Mean tdetx,y = (3657.05, 1785.73)
[Sun Oct 30 07:20:27 2011] chipx,y range = (759.00-803.00, 63.00-103.00)
[Sun Oct 30 07:20:27 2011] Size of ../../acisf10910/products/events/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 15 counts
[Sun Oct 30 07:20:27 2011] ../../acisf10910/products/images/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src3_src.img and ../../acisf10910/products/images/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Oct 30 07:20:27 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Oct 30 07:20:27 2011] arf not found, will run specextract
[Sun Oct 30 07:20:40 2011] ../../acisf10910/products/spectra/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src3.warf not found
[Sun Oct 30 07:20:40 2011] ../../acisf10910/products/spectra/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src3.wrmf not found
[Sun Oct 30 07:20:40 2011] Removal of ../../acisf10910/products/spectra/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src3.soff failed
[Sun Oct 30 07:20:45 2011] ../../acisf10910/products/lightcurves/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src3_src.lc and ../../acisf10910/products/lightcurves/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Oct 30 07:28:45 2011] Keeping rmf generated by specextract
[Sun Oct 30 07:28:45 2011] 177.498
[Sun Oct 30 07:34:45 2011] Updating aperture counts using extracted products
[Sun Oct 30 07:34:45 2011] Error reading totcts from fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Oct 30 07:34:45 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 07:34:45 2011] Using photon index=1.80, rate=0.002, arf fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src3.arf
[Sun Oct 30 07:34:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 07:34:45 2011] Updating source flux to 2.6e-14
[Sun Oct 30 07:34:56 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting