[Sun Oct 30 07:13:01 2011] Detection parameters:
  Position = (446.7, 987.3) = 9 55 32.37 18 5 55.9
  Extent = 0.6" x 0.5", rotation angle = 146 degrees
  Source counts = 16.7 +/- 4.2
  Background counts = 1.3
  Rate = 0.0003 +/- 8e-05

[Sun Oct 30 07:13:02 2011] Off-axis axis estimate = 2.77'
[Sun Oct 30 07:14:06 2011] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 07:14:06 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Sun Oct 30 07:14:06 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.891
[Sun Oct 30 07:14:06 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.54"
[Sun Oct 30 07:14:09 2011] fullrun_ccd6_acisf10910_pi14-548_cl_pass0_src11.ximg exists
[Sun Oct 30 07:14:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10910_pi14-548_cl_pass0_src11.csv
[Sun Oct 30 07:14:09 2011] fullrun_ccd6_acisf10910_pi14-548_cl_pass0_src11_1.ximg exists
[Sun Oct 30 07:14:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10910_pi14-548_cl_pass0_src11.csv
[Sun Oct 30 07:14:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10910_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10910_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 07:14:09 2011] fullrun_ccd6_acisf10910_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sun Oct 30 07:14:09 2011] fullrun_ccd6_acisf10910_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Oct 30 07:14:09 2011] Fit fullrun_ccd6_acisf10910_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Oct 30 07:14:18 2011] Spatial fit model total counts = 18.147400, observed total counts = 19.000000
[Sun Oct 30 07:14:18 2011] Offset between fit and detection position for source 11 = 0.740352 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.740352 pixels
  Position = (447.2, 987.8) = 9 55 32.37 18 5 55.9
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 18.2 +/- 4.3
  Background counts = 0.0
  Rate = 0.0004 +/- 8e-05
[Sun Oct 30 07:14:18 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 07:14:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 07:14:18 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 07:14:18 2011] Source does appear to be extended
[Sun Oct 30 07:14:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 07:14:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 07:14:39 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Sun Oct 30 07:14:39 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.138
[Sun Oct 30 07:14:39 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.68"
[Sun Oct 30 07:14:39 2011] fullrun_ccd6_acisf10910_pi14-548_cl_pass1_src11.ximg exists
[Sun Oct 30 07:14:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10910_pi14-548_cl_pass1_src11.csv
[Sun Oct 30 07:14:39 2011] fullrun_ccd6_acisf10910_pi14-548_cl_pass1_src11_1.ximg exists
[Sun Oct 30 07:14:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf10910_pi14-548_cl_pass1_src11.csv
[Sun Oct 30 07:14:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf10910_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf10910_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 07:14:40 2011] fullrun_ccd6_acisf10910_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sun Oct 30 07:14:40 2011] fullrun_ccd6_acisf10910_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Oct 30 07:14:40 2011] Fit fullrun_ccd6_acisf10910_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Oct 30 07:14:48 2011] Spatial fit model total counts = 19.942300, observed total counts = 21.000000
[Sun Oct 30 07:14:48 2011] Offset between fit and detection position for source 11 = 0.065933 pixels
[Sun Oct 30 07:14:48 2011] 20.506530 total counts/ 3.802130 bgd. counts: snr = 8.566776
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.065933 pixels
  Position = (447.2, 987.8) = 9 55 32.37 18 5 55.9
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 16.7 +/- 4.5
  Background counts = 3.8
  Rate = 0.0003 +/- 9e-05
[Sun Oct 30 07:14:48 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 07:14:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 07:14:48 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 07:14:48 2011] Source does appear to be extended
[Sun Oct 30 07:14:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 07:19:23 2011] Not overwriting source region fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src11_src.reg
[Sun Oct 30 07:19:23 2011] Extracting stamp from image fullrun_ccd6_acisf10910_pi14-548_cl_sm2.00.img.gz, (416, 957) - (478, 1019)
[Sun Oct 30 07:19:23 2011] Writing fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src11.gif
[Sun Oct 30 07:23:37 2011] ../../acisf10910/products/events/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src11_src.evt and ../../acisf10910/products/events/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sun Oct 30 07:23:37 2011] Size of ../../acisf10910/products/events/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src11_src.evt.gz[events] = 18 counts
[Sun Oct 30 07:23:37 2011] Mean chipx,y = (902.50, 425.39)
[Sun Oct 30 07:23:37 2011] Mean tdetx,y = (3777.50, 2127.39)
[Sun Oct 30 07:23:37 2011] chipx,y range = (884.00-921.00, 407.00-440.00)
[Sun Oct 30 07:23:37 2011] Size of ../../acisf10910/products/events/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 26 counts
[Sun Oct 30 07:23:37 2011] ../../acisf10910/products/images/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src11_src.img and ../../acisf10910/products/images/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Sun Oct 30 07:23:37 2011] Not generating rmf since there are only 16 counts
[Sun Oct 30 07:23:37 2011] arf not found, will run specextract
[Sun Oct 30 07:24:07 2011] ../../acisf10910/products/spectra/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src11.warf not found
[Sun Oct 30 07:24:07 2011] ../../acisf10910/products/spectra/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src11.wrmf not found
[Sun Oct 30 07:24:07 2011] Removal of ../../acisf10910/products/spectra/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src11.soff failed
[Sun Oct 30 07:24:13 2011] ../../acisf10910/products/lightcurves/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src11_src.lc and ../../acisf10910/products/lightcurves/fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sun Oct 30 07:28:45 2011] Spectrum 11 has only 17 counts, deleting rmf
[Sun Oct 30 07:28:46 2011] 204.991
[Sun Oct 30 07:34:45 2011] Updating aperture counts using extracted products
[Sun Oct 30 07:34:45 2011] Error reading totcts from fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src11_src.pi.gz
[Sun Oct 30 07:34:45 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 30 07:34:45 2011] Using photon index=1.80, rate=0.000324, arf fullrun_ccd6_acisf10910_pi14-548_pass1_cl_src11.arf
[Sun Oct 30 07:34:45 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 30 07:34:45 2011] Updating source flux to 3.5e-15
[Sun Oct 30 07:34:56 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting