[Sun Sep 25 10:44:17 2011] Detection parameters:
  Position = (636.3, 1161.2) = 15 52 19.01 20 4 50.3
  Extent = 0.6" x 0.5", rotation angle = 127 degrees
  Source counts = 15.1 +/- 4.0
  Background counts = 0.9
  Rate = 0.0006 +/- 0.0001

[Sun Sep 25 10:44:19 2011] Off-axis axis estimate = 2.85'
[Sun Sep 25 10:45:10 2011] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 10:45:10 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Sun Sep 25 10:45:10 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.856
[Sun Sep 25 10:45:10 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.55"
[Sun Sep 25 10:45:10 2011] fullrun_ccd3_acisf10908_pi14-548_cl_pass0_src7.ximg exists
[Sun Sep 25 10:45:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10908_pi14-548_cl_pass0_src7.csv
[Sun Sep 25 10:45:10 2011] fullrun_ccd3_acisf10908_pi14-548_cl_pass0_src7_1.ximg exists
[Sun Sep 25 10:45:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10908_pi14-548_cl_pass0_src7.csv
[Sun Sep 25 10:45:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10908_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10908_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 10:45:10 2011] fullrun_ccd3_acisf10908_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sun Sep 25 10:45:10 2011] fullrun_ccd3_acisf10908_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Sep 25 10:45:10 2011] Fit fullrun_ccd3_acisf10908_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Sep 25 10:45:19 2011] Spatial fit model total counts = 18.999800, observed total counts = 19.000000
[Sun Sep 25 10:45:19 2011] Offset between fit and detection position for source 3 = 0.781214 pixels
[Sun Sep 25 10:45:19 2011] 18.841020 total counts/ 5.203420 bgd. counts: snr = 5.978518
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.781214 pixels
  Position = (636.9, 1161.8) = 15 52 19.01 20 4 50.3
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 13.6 +/- 4.3
  Background counts = 5.2
  Rate = 0.0005 +/- 0.0002
[Sun Sep 25 10:45:19 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 10:45:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 10:45:19 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 10:45:19 2011] Source does appear to be extended
[Sun Sep 25 10:45:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 10:45:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 10:45:40 2011] Initial guess for spatial extent in simple fitting = 0.37"
[Sun Sep 25 10:45:40 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.632
[Sun Sep 25 10:45:40 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.37"
[Sun Sep 25 10:45:40 2011] fullrun_ccd3_acisf10908_pi14-548_cl_pass1_src7.ximg exists
[Sun Sep 25 10:45:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10908_pi14-548_cl_pass1_src7.csv
[Sun Sep 25 10:45:40 2011] fullrun_ccd3_acisf10908_pi14-548_cl_pass1_src7_1.ximg exists
[Sun Sep 25 10:45:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf10908_pi14-548_cl_pass1_src7.csv
[Sun Sep 25 10:45:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf10908_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf10908_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 10:45:41 2011] fullrun_ccd3_acisf10908_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sun Sep 25 10:45:41 2011] fullrun_ccd3_acisf10908_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Sep 25 10:45:41 2011] Fit fullrun_ccd3_acisf10908_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Sun Sep 25 10:45:49 2011] Spatial fit model total counts = 16.977100, observed total counts = 17.000000
[Sun Sep 25 10:45:49 2011] Offset between fit and detection position for source 3 = 0.015674 pixels
[Sun Sep 25 10:45:49 2011] 17.262970 total counts/ 3.533570 bgd. counts: snr = 7.303730
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.015674 pixels
  Position = (636.9, 1161.8) = 15 52 19.01 20 4 50.3
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 13.7 +/- 4.2
  Background counts = 3.5
  Rate = 0.0005 +/- 0.0002
[Sun Sep 25 10:45:49 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 10:45:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 10:45:49 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 10:45:49 2011] Source does appear to be extended
[Sun Sep 25 10:45:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 10:49:04 2011] Not overwriting source region fullrun_ccd3_acisf10908_pi14-548_pass1_cl_src3_src.reg
[Sun Sep 25 10:49:04 2011] Extracting stamp from image fullrun_ccd3_acisf10908_pi14-548_cl_sm2.00.img.gz, (619, 1144) - (654, 1179)
[Sun Sep 25 10:49:04 2011] Writing fullrun_ccd3_acisf10908_pi14-548_pass1_cl_src3.gif
[Sun Sep 25 10:49:27 2011] ../../acisf10908/products/events/fullrun_ccd3_acisf10908_pi14-548_pass1_cl_src3_src.evt and ../../acisf10908/products/events/fullrun_ccd3_acisf10908_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Sep 25 10:49:27 2011] Size of ../../acisf10908/products/events/fullrun_ccd3_acisf10908_pi14-548_pass1_cl_src3_src.evt.gz[events] = 14 counts
[Sun Sep 25 10:49:27 2011] Mean chipx,y = (1005.64, 680.00)
[Sun Sep 25 10:49:27 2011] Mean tdetx,y = (4452.00, 4066.64)
[Sun Sep 25 10:49:27 2011] chipx,y range = (986.00-1018.00, 663.00-697.00)
[Sun Sep 25 10:49:27 2011] Size of ../../acisf10908/products/events/fullrun_ccd3_acisf10908_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 4 counts
[Sun Sep 25 10:49:27 2011] ../../acisf10908/products/images/fullrun_ccd3_acisf10908_pi14-548_pass1_cl_src3_src.img and ../../acisf10908/products/images/fullrun_ccd3_acisf10908_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Sep 25 10:49:27 2011] ../../acisf10908/products/spectra/fullrun_ccd3_acisf10908_pi14-548_pass1_cl_src3_src.pi and ../../acisf10908/products/spectra/fullrun_ccd3_acisf10908_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Sep 25 10:49:27 2011] Not generating rmf since there are only 13 counts
[Sun Sep 25 10:49:30 2011] ../../acisf10908/products/lightcurves/fullrun_ccd3_acisf10908_pi14-548_pass1_cl_src3_src.lc and ../../acisf10908/products/lightcurves/fullrun_ccd3_acisf10908_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Sep 25 10:50:36 2011] 200.385
[Sun Sep 25 10:50:39 2011] Updating aperture counts using extracted products
[Sun Sep 25 10:50:39 2011] Error reading totcts from fullrun_ccd3_acisf10908_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Sep 25 10:50:40 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 10:50:40 2011] Using photon index=1.80, rate=0.000499, arf fullrun_ccd3_acisf10908_pi14-548_pass1_cl_src3.arf
[Sun Sep 25 10:50:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 10:50:40 2011] Updating source flux to 5.8e-15
[Sun Sep 25 10:50:58 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting