[Sun Sep 25 10:44:13 2011] Detection parameters:
  Position = (953.3, 759.8) = 15 52 20.49 20 9 30.5
  Extent = 1.0" x 0.6", rotation angle = 112 degrees
  Source counts = 113.8 +/- 10.8
  Background counts = 3.2
  Rate = 0.004 +/- 0.0004

[Sun Sep 25 10:44:15 2011] Off-axis axis estimate = 5.16'
[Sun Sep 25 10:45:08 2011] Using EEF radius (= 1.24 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 10:45:08 2011] Initial guess for spatial extent in simple fitting = 1.24"
[Sun Sep 25 10:45:08 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.982
[Sun Sep 25 10:45:08 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.24"
[Sun Sep 25 10:45:08 2011] fullrun_ccd1_acisf10908_pi14-548_cl_pass0_src2.ximg exists
[Sun Sep 25 10:45:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10908_pi14-548_cl_pass0_src2.csv
[Sun Sep 25 10:45:08 2011] fullrun_ccd1_acisf10908_pi14-548_cl_pass0_src2_1.ximg exists
[Sun Sep 25 10:45:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf10908_pi14-548_cl_pass0_src2.csv
[Sun Sep 25 10:45:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10908_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10908_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 10:45:09 2011] fullrun_ccd1_acisf10908_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sun Sep 25 10:45:09 2011] fullrun_ccd1_acisf10908_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Sep 25 10:45:09 2011] Fit fullrun_ccd1_acisf10908_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Sep 25 10:45:17 2011] Spatial fit model total counts = 118.589000, observed total counts = 118.000000
[Sun Sep 25 10:45:17 2011] Offset between fit and detection position for source 3 = 0.740536 pixels
[Sun Sep 25 10:45:17 2011] 118.383900 total counts/ 4.784900 bgd. counts: snr = 51.932362
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.740536 pixels
  Position = (953.8, 760.4) = 15 52 20.49 20 9 30.6
  Extent = 1.0 (0.9-1.2)", rotation angle = 0
  Source counts = 113.6 +/- 10.9
  Background counts = 4.8
  Rate = 0.004 +/- 0.0004
[Sun Sep 25 10:45:17 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 10:45:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 10:45:17 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 10:45:17 2011] Source does appear to be extended
[Sun Sep 25 10:45:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 10:45:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 10:45:36 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Sun Sep 25 10:45:36 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.913
[Sun Sep 25 10:45:36 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.04"
[Sun Sep 25 10:45:36 2011] fullrun_ccd1_acisf10908_pi14-548_cl_pass1_src2.ximg exists
[Sun Sep 25 10:45:36 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf10908_pi14-548_cl_pass1_src2.csv
[Sun Sep 25 10:45:36 2011] fullrun_ccd1_acisf10908_pi14-548_cl_pass1_src2_1.ximg exists
[Sun Sep 25 10:45:36 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf10908_pi14-548_cl_pass1_src2.csv
[Sun Sep 25 10:45:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf10908_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf10908_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 10:45:36 2011] fullrun_ccd1_acisf10908_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sun Sep 25 10:45:36 2011] fullrun_ccd1_acisf10908_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Sep 25 10:45:36 2011] Fit fullrun_ccd1_acisf10908_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Sep 25 10:45:47 2011] Spatial fit model total counts = 118.785000, observed total counts = 118.000000
[Sun Sep 25 10:45:47 2011] Offset between fit and detection position for source 3 = 0.039543 pixels
[Sun Sep 25 10:45:47 2011] 118.481590 total counts/ 4.368590 bgd. counts: snr = 54.596459
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.039543 pixels
  Position = (953.8, 760.3) = 15 52 20.49 20 9 30.6
  Extent = 1.0 (0.9-1.2)", rotation angle = 0
  Source counts = 114.1 +/- 10.9
  Background counts = 4.4
  Rate = 0.004 +/- 0.0004
[Sun Sep 25 10:45:47 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 10:45:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 10:45:47 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 10:45:47 2011] Source does appear to be extended
[Sun Sep 25 10:45:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 10:46:57 2011] Not overwriting source region fullrun_ccd1_acisf10908_pi14-548_pass1_cl_src3_src.reg
[Sun Sep 25 10:46:57 2011] Extracting stamp from image fullrun_ccd1_acisf10908_pi14-548_cl_sm2.00.img.gz, (906, 712) - (1002, 808)
[Sun Sep 25 10:46:57 2011] Writing fullrun_ccd1_acisf10908_pi14-548_pass1_cl_src3.gif
[Sun Sep 25 10:47:09 2011] ../../acisf10908/products/events/fullrun_ccd1_acisf10908_pi14-548_pass1_cl_src3_src.evt and ../../acisf10908/products/events/fullrun_ccd1_acisf10908_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sun Sep 25 10:47:11 2011] Size of ../../acisf10908/products/events/fullrun_ccd1_acisf10908_pi14-548_pass1_cl_src3_src.evt.gz[events] = 119 counts
[Sun Sep 25 10:47:11 2011] Mean chipx,y = (501.80, 832.23)
[Sun Sep 25 10:47:11 2011] Mean tdetx,y = (4299.77, 4608.80)
[Sun Sep 25 10:47:11 2011] chipx,y range = (485.00-527.00, 814.00-856.00)
[Sun Sep 25 10:47:12 2011] Size of ../../acisf10908/products/events/fullrun_ccd1_acisf10908_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 44 counts
[Sun Sep 25 10:47:12 2011] ../../acisf10908/products/images/fullrun_ccd1_acisf10908_pi14-548_pass1_cl_src3_src.img and ../../acisf10908/products/images/fullrun_ccd1_acisf10908_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Sun Sep 25 10:47:12 2011] ../../acisf10908/products/spectra/fullrun_ccd1_acisf10908_pi14-548_pass1_cl_src3_src.pi and ../../acisf10908/products/spectra/fullrun_ccd1_acisf10908_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sun Sep 25 10:47:16 2011] ../../acisf10908/products/lightcurves/fullrun_ccd1_acisf10908_pi14-548_pass1_cl_src3_src.lc and ../../acisf10908/products/lightcurves/fullrun_ccd1_acisf10908_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sun Sep 25 10:47:53 2011] Keeping rmf generated by specextract
[Sun Sep 25 10:47:53 2011] 177.844
[Sun Sep 25 10:50:39 2011] Updating aperture counts using extracted products
[Sun Sep 25 10:50:39 2011] Error reading totcts from fullrun_ccd1_acisf10908_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Sep 25 10:50:39 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 10:50:39 2011] Using photon index=1.80, rate=0.00415, arf fullrun_ccd1_acisf10908_pi14-548_pass1_cl_src3.arf
[Sun Sep 25 10:50:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Sep 25 10:50:39 2011] Updating source flux to 5.3e-14